11
\$\begingroup\$

As per Luke's request and Peter Taylor's addition to this challenge.

Introduction

Everyone knows the game tic-tac-toe, but in this challenge, we are going to introduce a little twist. We are only going to use crosses. The first person who places three crosses in a row loses. An interesting fact is that the maximum amount of crosses before someone loses, is equal to 6:

X X -
X - X
- X X

That means that for a 3 x 3 board, the maximum amount is 6. So for N = 3, we need to output 6.

Another example, for N = 4, or a 4 x 4 board:

X X - X
X X - X
- - - -
X X - X

This is an optimal solution, you can see that the maximum amount of crosses is equal to 9. An optimal solution for a 12 x 12 board is:

X - X - X - X X - X X -
X X - X X - - - X X - X
- X - X - X X - - - X X
X - - - X X - X X - X -
- X X - - - X - - - - X
X X - X X - X - X X - -
- - X X - X - X X - X X
X - - - - X - - - X X -
- X - X X - X X - - - X
X X - - - X X - X - X -
X - X X - - - X X - X X
- X X - X X - X - X - X

This results in 74.

The task

Your task is to compute the results as fast as possible. I will run your code on the test case 13. This will be done 5 times and then the average is taken of the run times. That is your final score. The lower, the better.

Test cases

N     Output
1       1
2       4
3       6
4       9
5       16
6       20
7       26
8       36
9       42
10      52
11      64
12      74
13      86
14      100
15      114

More information can be found at https://oeis.org/A181018.

Rules

  • This is , so the fastest submission wins!
  • You must provide a full program.
  • Please also provide how I have to run the program. I am not familiar with all programming languages and how they work, so I need a little bit of help here.
  • Of course, your code needs to compute the correct result for each test case.

Submissions:

  • feersum (C++11): 28s
  • Peter Taylor (Java): 14m 31s
\$\endgroup\$
9
  • \$\begingroup\$ Related and related. \$\endgroup\$
    – Adnan
    Commented Mar 30, 2016 at 17:56
  • \$\begingroup\$ Isn't this just a dupe of the second question as as far as I can tell, you've just changed the winning condition? \$\endgroup\$
    – Blue
    Commented Mar 30, 2016 at 18:54
  • 1
    \$\begingroup\$ @muddyfish Altough the challenge itself look the same, I can ensure you that the approach for this challenge is very different from my other challenge. \$\endgroup\$
    – Adnan
    Commented Mar 30, 2016 at 19:05
  • 3
    \$\begingroup\$ @muddyfish Relevant meta discussion. "Just changing the winning condition" can be a substantial change for a challenge. While it doesn't make sense to post a code-golf, fastest-algorithm and fastest-code for every possible challenge, there are some cases, where exploring a problem from two angles can add a lot of value to the site. I think this is such a case. \$\endgroup\$ Commented Mar 30, 2016 at 19:11
  • 1
    \$\begingroup\$ Wonderful challenge! (+1) \$\endgroup\$
    – user9206
    Commented Apr 6, 2016 at 15:50

3 Answers 3

7
\$\begingroup\$

Java, 14m 31s

This is essentially the program which I posted to OEIS after using it to extend the sequence, so it's a good reference for other people to beat. I've tweaked it to take the board size as the first command-line argument.

public class A181018 {
    public static void main(String[] args) {
        int n = Integer.parseInt(args[0]);
        System.out.println(calc(n));
    }

    private static int calc(int n) {
        if (n < 0) throw new IllegalArgumentException("n");
        if (n < 3) return n * n;

        // Dynamic programming approach: given two rows, we can enumerate the possible third row.
        // sc[i + rows.length * j] is the greatest score achievable with a board ending in rows[i], rows[j].
        int[] rows = buildRows(n);
        byte[] sc = new byte[rows.length * rows.length];
        for (int j = 0, k = 0; j < rows.length; j++) {
            int qsc = Integer.bitCount(rows[j]);
            for (int i = 0; i < rows.length; i++) sc[k++] = (byte)(qsc + Integer.bitCount(rows[i]));
        }

        int max = 0;
        for (int h = 2; h < n; h++) {
            byte[] nsc = new byte[rows.length * rows.length];
            for (int i = 0; i < rows.length; i++) {
                int p = rows[i];
                for (int j = 0; j < rows.length; j++) {
                    int q = rows[j];
                    // The rows which follow p,q cannot intersect with a certain mask.
                    int mask = (p & q) | ((p << 2) & (q << 1)) | ((p >> 2) & (q >> 1));
                    for (int k = 0; k < rows.length; k++) {
                        int r = rows[k];
                        if ((r & mask) != 0) continue;

                        int pqrsc = (sc[i + rows.length * j] & 0xff) + Integer.bitCount(r);
                        int off = j + rows.length * k;
                        if (pqrsc > nsc[off]) nsc[off] = (byte)pqrsc;
                        if (pqrsc > max) max = pqrsc;
                    }
                }
            }

            sc = nsc;
        }

        return max;
    }

    private static int[] buildRows(int n) {
        // Array length is a tribonacci number.
        int c = 1;
        for (int a = 0, b = 1, i = 0; i < n; i++) c = a + (a = b) + (b = c);

        int[] rows = new int[c];
        int i = 0, j = 1, val;
        while ((val = rows[i]) < (1 << (n - 1))) {
            if (val > 0) rows[j++] = val * 2;
            if ((val & 3) != 3) rows[j++] = val * 2 + 1;
            i++;
        }

        return rows;
    }
}

Save to A181018.java; compile as javac A181018.java; run as java A181018 13. On my computer it takes about 20 minutes to execute for this input. It would probably be worth parallelising it.

\$\endgroup\$
2
  • \$\begingroup\$ How long have you been running it? You're still adding terms to the OEIS, I see. \$\endgroup\$
    – mbomb007
    Commented Mar 30, 2016 at 22:02
  • 1
    \$\begingroup\$ @mbomb007, I'm not still running it. As you can tell from the OEIS dates, it took several days to run for n=16; I extrapolated that it would take about a month for n=17, so I didn't try to run it for that. Memory usage was also becoming a major nuisance. (PS I'm currently using 2 of my 4 cores for a non-PPCG programming challenge: azspcs.com/Contest/Tetrahedra/Standings ) \$\endgroup\$ Commented Mar 30, 2016 at 22:09
5
\$\begingroup\$

C++11, 28s

This also uses a dynamic programming approach based on rows. It took 28 seconds to run with argument 13 for me. My favorite trick is the next function which uses some bit bashing for finding the lexicographically next row arrangement satisfying a mask and the no-3-in-a-row rule.

Instructions

  1. Install the latest MinGW-w64 with SEH and Posix threads
  2. Compile the program with g++ -std=c++11 -march=native -O3 <filename>.cpp -o <executable name>
  3. Run with <executable name> <n>
#include <vector>
#include <stddef.h>
#include <iostream>
#include <string>

#ifdef _MSC_VER
#include <intrin.h>
#define popcount32 _mm_popcnt_u32
#else
#define popcount32 __builtin_popcount
#endif


using std::vector;

using row = uint32_t;
using xcount = uint8_t;

uint16_t rev16(uint16_t x) { // slow
    static const uint8_t revbyte[] {0,128,64,192,32,160,96,224,16,144,80,208,48,176,112,240,8,136,72,200,40,168,104,232,24,152,88,216,56,184,120,248,4,132,68,196,36,164,100,228,20,148,84,212,52,180,116,244,12,140,76,204,44,172,108,236,28,156,92,220,60,188,124,252,2,130,66,194,34,162,98,226,18,146,82,210,50,178,114,242,10,138,74,202,42,170,106,234,26,154,90,218,58,186,122,250,6,134,70,198,38,166,102,230,22,150,86,214,54,182,118,246,14,142,78,206,46,174,110,238,30,158,94,222,62,190,126,254,1,129,65,193,33,161,97,225,17,145,81,209,49,177,113,241,9,137,73,201,41,169,105,233,25,153,89,217,57,185,121,249,5,133,69,197,37,165,101,229,21,149,85,213,53,181,117,245,13,141,77,205,45,173,109,237,29,157,93,221,61,189,125,253,3,131,67,195,35,163,99,227,19,147,83,211,51,179,115,243,11,139,75,203,43,171,107,235,27,155,91,219,59,187,123,251,7,135,71,199,39,167,103,231,23,151,87,215,55,183,119,247,15,143,79,207,47,175,111,239,31,159,95,223,63,191,127,255};
    return uint16_t(revbyte[x >> 8]) | uint16_t(revbyte[x & 0xFF]) << 8;
}

// returns the next number after r that does not overlap the mask or have three 1's in a row
row next(row r, uint32_t m) {
    m |= r >> 1 & r >> 2;
    uint32_t x = (r | m) + 1;
    uint32_t carry = x & -x;
    return (r | carry) & -carry;
}

template<typename T, typename U> void maxequals(T& m, U v) {
    if (v > m)
        m = v;
}

struct tictac {
    const int n;
    vector<row> rows;
    size_t nonpal, nrows_c;
    vector<int> irow;
    vector<row> revrows;

    tictac(int n) : n(n) { }

    row reverse(row r) {
        return rev16(r) >> (16 - n);
    }

    vector<int> sols_1row() {
        vector<int> v(1 << n);
        for (uint32_t m = 0; !(m >> n); m++) {
            auto m2 = m;
            int n0 = 0;
            int score = 0;
            for (int i = n; i--; m2 >>= 1) {
                if (m2 & 1) {
                    n0 = 0;
                } else {
                    if (++n0 % 3)
                        score++;
                }
            }
            v[m] = score;
        }
        return v;
    }

    void gen_rows() {
        vector<row> pals;
        for (row r = 0; !(r >> n); r = next(r, 0)) {
            row rrev = reverse(r);
            if (r < rrev) {
                rows.push_back(r);
            } else if (r == rrev) {
                pals.push_back(r);
            }
        }
        nonpal = rows.size();
        for (row r : pals) {
            rows.push_back(r);
        }
        nrows_c = rows.size();
        for (int i = 0; i < nonpal; i++) {
            rows.push_back(reverse(rows[i]));
        }
        irow.resize(1 << n);
        for (int i = 0; i < rows.size(); i++) {
            irow[rows[i]] = i;
        }
        revrows.resize(1 << n);
        for (row r = 0; !(r >> n); r++) {
            revrows[r] = reverse(r);
        }
    }

    // find banned locations for 1's given 2 above rows
    uint32_t mask(row a, row b) {
        return ((a & b) | (a >> 1 & b) >> 1 | (a << 1 & b) << 1) /*& ((1 << n) - 1)*/;
    }

    int calc() {
        if (n < 3) {
            return n * n;
        }
        gen_rows();
        int tdim = n < 5 ? n : (n + 3) / 2;
        size_t nrows = rows.size();
        xcount* t = new xcount[2 * nrows * nrows_c]{};
#define tb(nr, i, j) t[nrows * (nrows_c * ((nr) & 1) + (i)) + (j)]

        // find optimal solutions given 2 rows for n x k grids where 3 <= k <= ceil(n/2) + 1

        {
            auto s1 = sols_1row();
            for (int i = 0; i < nrows_c; i++) {
                row a = rows[i];
                for (int j = 0; j < nrows; j++) {
                    row b = rows[j];
                    uint32_t m = mask(b, a) & ~(1 << n);
                    tb(3, i, j) = s1[m] + popcount32(a << 16 | b);
                }
            }
        }
        for (int r = 4; r <= tdim; r++) {
            for (int i = 0; i < nrows_c; i++) {
                row a = rows[i];
                for (int j = 0; j < nrows; j++) {
                    row b = rows[j];
                    bool rev = j >= nrows_c;
                    auto cj = rev ? j - nrows_c : j;
                    uint32_t m = mask(a, b);
                    for (row c = 0; !(c >> n); c = next(c, m)) {
                        row cc = rev ? revrows[c] : c;
                        int count = tb(r - 1, i, j) + popcount32(c);
                        maxequals(tb(r, cj, irow[cc]), count);
                    }
                }
            }
        }
        int ans = 0;
        if (tdim == n) { // small sizes
            for (int i = 0; i < nrows_c; i++) {
                for (int j = 0; j < nrows; j++) {
                    maxequals(ans, tb(n, i, j));
                }
            }
        } else {
            int tdim2 = n + 2 - tdim;
            // get final answer by joining two halves' solutions down the middle
            for (int i = 0; i < nrows_c; i++) {
                int apc = popcount32(rows[i]);
                for (int j = 0; j < nrows; j++) {
                    row b = rows[j];
                    int top = tb(tdim2, i, j);
                    int bottom = j < nrows_c ? tb(tdim, j, i) : tb(tdim, j - nrows_c, i < nonpal ? i + nrows_c : i);
                    maxequals(ans, top + bottom - apc - popcount32(b));
                }
            }
        }
        delete[] t;
        return ans;
    }
};


int main(int argc, char** argv) {
    int n;
    if (argc < 2 || (n = std::stoi(argv[1])) < 0 || n > 16) {
        return 1;
    }
    std::cout << tictac{ n }.calc() << '\n';
    return 0;
}
\$\endgroup\$
0
0
\$\begingroup\$

matlab, cplex, baseline?

This code is modified from the MATLAB code provided on A181018

how to run?

  1. download cplex and yalmip folder, then place them in matlab toolbox folder
  2. matlab ui, HOME->Set Path->Add Folder With Subfolders, add the 2 folders and their subfolders to path
  3. run main.m
% A181018.m
function v = A181018(n)
%
Grid = [1:n]' * ones(1, n) + n*ones(n, 1)*[0:n-1];
f = -ones(n^2, 1);
A = sparse(4*(n-2)*(n-1), n^2);
count = 0;
for i =1:n
    for j = 1:n-2
        count = count+1;
        A(count, [Grid(i, j), Grid(i, j+1), Grid(i, j+2)]) = 1;
    end
end
for i = 1:n-2
    for j = 1:n
        count = count+1;
        A(count, [Grid(i, j), Grid(i+1, j), Grid(i+2, j)]) = 1;
    end
end
for i = 1:n-2
    for j = 1:n-2
        count = count+2;
        A(count-1, [Grid(i, j+2), Grid(i+1, j+1), Grid(i+2, j)]) = 1;
        A(count, [Grid(i, j), Grid(i+1, j+1), Grid(i+2, j+2)]) = 1;
    end
end
b = 2*ones(4*(n-2)*(n-1), 1);


options = cplexoptimset;
options.MaxTime = 120;
options.Algorithm = 'auto';
% [x, v, exitflag, output] = cplexbilp(f, A, b,options);
[~, v, ~, ~] = cplexbilp(f, A, b,options);  % Solve binary integer programming problems.
v=-v;
end
% main.m
clear all;close all;clc;
tic
for n = 1:11
    A(n) = A181018(n);
end
A % Robert Israel, Jan 14 2016
toc

Reference

See Getting Started with CPLEX for MATLAB for a quick start.

cplexbilp - IBM Documentation

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.