# [Chip], 174 bytes

171 bytes for the code + 3 bytes for the flag (`-w`)

    tz | |~/~/-/-/-/--/~/f

[Try it online!]

Chip is a 2D language inspired by integrated circuits, input and output are broken down into individual bits which travel through gates and across wires.

**Ungolfed (243 bytes):**


**How the ungolfed version works:**

This implementation encodes the target string `Hello, World!` as a series of transitions between each character. The leftmost column of `-`'s and `~`'s corresponds to `H` in the output, the rightmost column to `!`. `-` is a simple horizontal wire, and `~` is a left-to-right not gate.

The top row is for timing, and the remaining rows are for the bits of the output (the row ending in `h` is the highest bit, and `a` is the lowest).

The timing row's behavior starts with the `*`, which produces an always-on signal. (It is stood off with a horizontal wire to prevent interaction with `h` below it). The `z`'s delay signal propagation right-to-left by one cycle, each one corresponds to the transition to the next letter of the output. The `v`'s are wires connecting this timing sequence to the columns with `/`'s. These columns are switches used to sequence the various character transitions. At the end of the timing row is `t`, which terminates the program, preventing infinite exclamation marks at the end.

In the first cycle, only the rightmost column is connected, so bits `d` and `g` turn on because `not(nothing)` is `on`; the remaining bits stay off. This gives us `01001000`, which is `H`.

In the next cycle, the rightmost two columns are now connected. `a`, `c`, and `f` turn on much like the bits in the first cycle, and `d` turns off again because `not(not(nothing))` is `off`. This gives us `01100101`, which is `e`.

This continues all the way across to the left, giving the remainder of the output.

**Golfing it:**

There's not a lot that could be done here, but there are a few things of note:

- The `h` row is always off, so that can be eliminated.
- The double `l` in "Hello" eliminates the need for one of the switch columns.
- Each row can be trimmed on both ends, removing unnecessary `-`'s, so long as the timing signal can still be propagated downward. This is why the rows are rearranged.
- For the leftmost column, a wire connector `>` can be used instead of `~/`, as they behave the same in this context. This eliminates the leftmost column, except for the `t`.
- The `t` can be moved to the empty space in the lower left from the trimming, so long as it is accompanied by enough `z`'s to have the same timing as before. This fully eliminates the leftmost column.

[Chip]: https://github.com/Phlarx/chip
[Try it online!]: https://tio.run/nexus/chip#@19VhgbBhK4Wl52@LhjWQbEumJMOFq@DYyAJIhK5EiAcKAlWXqefzKVgVweXAAuDuSlcJVUKNQo1cMUQ5WlcCgoKdrpIhieBRBIgRqT@//9ftxwA "Chip – TIO Nexus"