# Make me a scrolling marquee

## Introduction

Remember the roaring 80's? I mean, you know, like 30 years ago? No cell phones, no internet, no ATM's, fluorescent clothing (what was that?!) and scrolling marqee's! No, no, no! Not the online ones, but real ones, With LED lights.

Since I'm in a nostalgic mood, I'd like you to create a scrolling marquee.

## Challenge

Create a program where you can enter a one line string. You program needs to create a 80 character wide scrolling marquee, repeating the text if necessary.

## Rules

• The user must be able to enter a string to your program as input. The string can be a command line parameter or a string entered while running the program.
• Your program must continuously print a string of exactly 80 (visible) characters.
• The string must be updated every 0.1 second (more or less; I won't be timing it), shifting the characters every iteration one position to the left.
• The string "rotates". At the end of the user supplied string, another instance of the string must appear.
• You program must print it's output on one line, without linefeeds (use a '\r' instead of a '\n')
• Your program must run ad infinitum, until an user interrupt.
• This is a codegolf, so shortest code in bytes wins.
• There is a 10% bonus (rounded up to the next integer) for printing in red on a black background.
• Standard loopholes apply.

## Reference implementation in Python 2.7

This program isn't golfed, but it provides a reference implementation (and thus an upper limit to the size).

import time,sys
s=raw_input()*99
while 1:
for i in range(80):
print s[i:i+80]+'\r',
sys.stdout.flush()
time.sleep(0.1)

• @mbomb007 similar, but not the same. Also this question looks like it (good for inspiration) but it is different on several respects, I think. Also, I found the scores (code lengths) quite disappointing. I really think we can do better! – agtoever Sep 25 '15 at 18:12
• Maybe as code golf + popularity contest? – SuperJedi224 Sep 25 '15 at 19:09
• Do we have to wait exactly 100 ms? – Dennis Sep 26 '15 at 6:24
• @Dennis well, more or less. It's ok if you set it to 99 to save a char. Let's say the execution of the other instructions will take 0.01 sec. :-) – agtoever Sep 26 '15 at 6:28
• What should happen if the input string is more than 80 characters? Your reference implementation, and my answer, get to s[80:160] and then jump back to s[0..] they never print the end of the long string, e.g. an input of 1 2 3 4 5 6 7 8 9 10 11 ... 300 cuts off after about 56. – TessellatingHeckler Sep 26 '15 at 20:54

# CJam, 31 bytes

l80*{Dco_80<o(+es99+{es1$<}g;}h  Waits for exactly 100 ms. This will only work with the official Java interpreter, since the online interpreter only shows output after exiting the program. Red text on black background is possible in 40 (or 39) bytes, for a score of 36: 0000000: 6c 38 30 2a 7b 22 0d 1b 5b 33 31 3b 34 30 6d 22 6f 5f l80*{"..[31;40m"o_ 0000012: 38 30 3c 6f 28 2b 65 73 39 39 2b 7b 65 73 31 24 3c 7d 80<o(+es99+{es1$<}
0000024: 67 3b 7d 68                                            g;}h


### How it works

l80*                             Read a line and repeat it 80 times.
{                        }h  Do:
Dco                           Print the character with code point 13.
_80<o                      Print the first 80 characters of the string.
(+                    Rotate the string one charcter to the left.
es99+               Push the current time (ms) plus 99.
{     }g       Do:
for () {
Write-Host ($text.substring(($i=++$i%80), 80)+"r") -NoNewLine -ForegroundColor Red -BackgroundColor Black sleep -Miliseconds 99 }  • The parameters only need to be long enough to be unique, so -F R is unique enough to set a Red ForegroundColor, for example. • 'Black' has to be 'Bla' to be unique compared to 'Blue', but -B 0 sets it to color Enum value 0 which is interpreted as Black. ### Alternative, more 'correct' marquee: The reference code doesn't handle strings longer than 80 characters nicely, skipping anything in the message past ~160 characters, and it glitch-resets every 99*len(string) characters. e.g. if the sign width was 5 characters long, it does this:  here is my long test input 0 |here | 1 |ere i| ^^^^ never shown 2 |re is| 3 |e is | 4 | is m| 0 |here | 1 |ere i| ...  This version indexes modulo the text length instead of the sign width, so it runs through the whole string. 106 - 10% = 95 chars. $l=($s=Read-Host).Length;for(){Write-Host(($s*160).substring(($i=++$i%$l),80)+"r")-N -F R -B 0;sleep -m 99}  ### Alternative: sign which cycles like the .gif in the question, 118-10%=106 Because it looks better. $s=' '*80+(read-host)+' '*80;for(){write-host($s.Substring(($i=++$i%($s.length-80)),80)+"r")-N -F R -B 0;sleep -m 99}


• I know this answer is pretty old, but this question is frontpage right now - Bla to 0 - Write-Host will interpret numbers to colors. – colsw Feb 16 '17 at 11:08
• @ConnorLSW Thanks, you got it below 100 chars! And I have no idea why I missed your comment a year ago(!) someone just upvoted and I came back to see what it was. – TessellatingHeckler Feb 23 '17 at 19:10
• no worries, I think you can also change while(1) to for() to save some bytes :) – colsw Feb 23 '17 at 20:10
• @ConnorLSW so you can, done that too. (I could probably do that in most of my golfs, it's not something I think of normally). – TessellatingHeckler Feb 23 '17 at 20:30
• As you're using for(), you can save one more byte changing $s=(Read-Host)*180;for(){ to for($s=(Read-Host)*180){ – Clijsters Nov 15 '17 at 15:06

# Matlab, 76 bytes

What I think is nice here is that you can have vectors as array indices. This returns a vector of the corresponding array entries, which makes it very easy to append the given string independently of the length.

a=input('');k=1:80;while 1;pause(.1);clc;k=mod(k+1,nnz(a));disp(a(k+1));end


Result:

• Nice trick with clc. You forgot to add 's' in input – Luis Mendo Sep 26 '15 at 11:38
• What s do you mean? It works perfectly fine as it is in the Matlab version I have acces to (R2010b). – flawr Sep 26 '15 at 12:04
• As it is now, you need to input the string with quotes. To enter the string contents directly (without qoutes) you need a=input('','s') – Luis Mendo Sep 26 '15 at 12:46
• Now I see, I was not aware of that feature. As the specs do not require this, I think it is ok to require ' delimited strings as input. Many languages need a string delimiter or they would interpret a command line argument in the form of a sentence (words separated by spaces) as multiple arguments anyway. – flawr Sep 26 '15 at 13:02

# QBasic, 116 113 bytes - 10% = 105 102

INPUT s$COLOR 4 1CLS FOR i=a TO a+79 ?MID$(s$,i MOD LEN(s$)+1,1);
NEXT
?
a=a+1
t=TIMER+.1
2ON(TIMER<t)+2GOTO 2,1


Here's a formatted version with some comments:

INPUT s$COLOR 4 ' 4 is the color code for red (the background's already black) 1 CLS ' CLear Screen (and mark this as line number 1) ' The variable a represents an offset from the beginning of the string ' As a numeric variable, it is 0 at the beginning of the program FOR i = a TO a + 79 ' Print i'th character mod string length (+ 1 because QBasic strings ' are 1-indexed) PRINT MID$(s$, i MOD LEN(s$) + 1, 1);
NEXT i
PRINT
a = a + 1

' Do a busy-wait for .1 seconds
' (Unfortunately, QBasic's SLEEP command only takes integer values)
' Set t to the time we want to stop waiting, .1 seconds in the future
t = TIMER + .1
' We want to stay on line number 2 while TIMER < t; once that condition is
' no longer true, we want to goto the top of the outer loop (line number 1)
' Since true is -1 and false is 0 in QBasic, adding 2 to the conditional
' gives 1 for true and 2 for false; we can pass these values to the
' ON ... GOTO statement to branch conditionally
2 ON (TIMER < t) + 2 GOTO 2, 1


A couple of notes:

• I don't know why the PRINT after the FOR loop is necessary. CLS should reset the cursor to the top left corner each time. But on QB64, at least, if I don't put the extra PRINT in, the marquee ends up on the second line instead of the first. If anybody has QBasic set up on DosBox or somesuch, I'd be interested to know if the same thing happens there or if it's a QB64 bug.
• The code has a small glitch because it relies on TIMER (number of seconds since midnight) for the delay. If the code is running at midnight, the marquee will get stuck because TIMER will reset to 0 and always be less than t thereafter.
• My first language! IIRC, in QB 4.5 anyway, a semicolon at the end of a printed string means the PRINT statement does not print a carriage return. – bgStack15 Sep 15 '16 at 11:59
• @bgStack15 Mine too. :^D The issue isn't really with PRINT but with CLS--after CLS, no matter what was printed before, the next PRINT statement should output at 1,1; but instead, I ran into a situation where it output at 2,1. – DLosc Sep 15 '16 at 18:25

## Perl, 99 98 bytes (-10% = 89)

$|=@_=split('',pop);printf("\e[31m\r%.80s",join('',@_)x80)while select($a,$a,$a,.1)|push@_,shift@_


Takes its input from command line parameter.

perl marquee.pl "Welcome to Programming Puzzles & Code Golf "


# pb, ⌈(216 + 3)*0.9⌉ = 198

+3 bytes for interpreter flag d=1

c^w[Y=-1]{w[B!0]{>}t[X]<[X-79]w[X!0]{t[T-1]w[T=-1]{t[0]}<}vw[T=0]{^w[B!0]{t[B]^b[T]>v}<[X]^w[B!0]{t[B]vw[B!0]{>}b[T]<[X]^w[B=0]{>}b[0]>}v}}^w[1=1]{<[X-80]w[X!0]{<t[B]vb[T]^}w[B!0]{t[B]<b[T]>>}<[X]<t[B]w[B!0]{>}<b[T]}


A pretty horrible score, but considering how hard it is to do anything in this language it could be worse. This answer's ratio of (bytes used to get red text) to (bonus from having red text) is really good, the whole output is turned red with only the c at the beginning!

The time between each tick varies depending on the length of the input string but it's around 0.1 seconds.

By the way, this program's output looks like total garbage because the interpreter is so bad. Every millisecond it clears the terminal and redraws everything, so it gets really flickery.

c           # Change paint colour to red

^w[Y=-1]{   # While Y=-1 (arbitrary condition we can break later)

w[B!0]{>}   # Go to end of input

t[X]        # Save length of input in T

# SET T TO MAX(T-79, 0)

<[X-79]     # Go to (79, -1)

w[X!0]{     # While X is not 0
t[T-1]      # Subtract 1 from T
w[T=-1]{    # If T is now negative
t[0]        # Set it back to 0
}
<         # Move left (position doesn't matter except to end the loop eventually)
}

# DONE SETTING T TO MAX(T-79, 0)
# If T == 0, the string needs to be doubled. Otherwise this part of the program is done

v           # Move down to break the loop unless this is specifically undone
w[T=0]{     # While T == 0
^w[B!0]{    # For each byte of input
t[B]^b[T] # Copy it up 1 place
>v        # Go to the next byte
}
<[X]^     # First byte of the copy
w[B!0]{   # For each byte of the copy
t[B]      # Save the byte's value
vw[B!0]{>}# Go to the first empty spot after the original
b[T]      # Write the saved value
<[X]^w[B=0]{>} # Go back to the first byte of the copy
b[0]>     # Erase it and go to the next one
}
v       # Back to Y=-1 to reset the loop from the very beginning
}

}

# After ALL OF THAT nonsense, we're now at (0, 0) and the input string is guaranteed to be
# at least 80 characters long

^
w[1=1]{       # While 1=1 (should hold true until mathematics itself breaks down)
<[X-80]        # Go to the 81st character
w[X!0]{        # While X!=0
<t[B]vb[T]^    # Go left and copy that character down
}

w[B!0]{      # For each byte in the string
t[B]<b[T]>>  # Copy that byte left
}

<[X]<t[B]    # Go get the first value (copied to (-1, -1))
w[B!0]{>}<b[T]# Bring it to the end of the string
}


$|=1;$_=<>;chomp;for(;;){print "\e[31m",substr(" "x80 .$_,$p++,80)," \r";select($z,$z,$z,0.1);if($p>length()+80){$p=0}}  # Matlab, ⌈188*.9⌉ = 170 This works in Matlab version R2014b or higher. The result is shown on a figure window. h=text(.1,.1,repmat(' ',1,80),'fontn','courier','ba','k','co','r');set(1,'pos',[90 90 990 90]);axis off s=input('','s');n=0;while 1 n=n+1;pause(.1) h.String=s(mod((0:79)+n,numel(s))+1);end  In the following example, text is typed in boldface for better visualization (not done in the above code because it costs a few bytes). Note also that the speed of the GIF animation does not correspond to the required 0.1 s pause, but the timing is correct in the actual figure shown by running the program. # SpecBAS, 130 bytes (-10% = 117) Multiplies the original string to make it 80 or more characters, then chops it to exactly 80. TEXT is a command in SpecBAS that works the same way as PRINT (in this example) but saves one character. The SCALE command adds a few extra characters to the code, but makes it look more marquee-ish. The program keeps going until you press Esc. 1 INPUT s$: LET s$=s$*CEIL(80/LEN s$) 2 TEXT PAPER 0;INK 2;SCALE 1,2;AT 1,1;s$( TO 80)
3 LET s$=s$(2 TO)+s$(1): PAUSE 5: GO TO 2  ## Perl, 63 (70 chars - 10% for bonus) Not a hugely different solution to the others, but I wasted my time making it, so I thought I'd post it as well! $_=<>;s/
/ /;print"\x0d\x1b[91m",substr"$_"x80,$z++%y///c,80 untilsleep .1


Relies on a Unix-compatible terminal for ANSI codes and the call to coreutils' sleep. The two \x.. chars in the above are actually a literal line-feed and escape char as per this hex dump:

0000000: 245f 3d3c 3e3b 732f 0a2f 202f 3b70 7269  $_=<>;s/./ /;pri 0000010: 6e74 220d 1b5b 3931 6d22 2c73 7562 7374 nt"..[91m",subst 0000020: 7222 245f 2278 3830 2c24 7a2b 2b25 792f r"$_"x80,$z++%y/ 0000030: 2f2f 632c 3830 2075 6e74 696c 6073 6c65 //c,80 untilsle 0000040: 6570 202e 3160 ep .1  # Ruby, 7976 75 bytes t,i=gets.chop*81,0 loop{system'cls'$><<t[(i=(i+1)%80)..i+79]
sleep 0.1}


I'm still not a ruby expert, possibly can be golfed down.

With red & black same score:

t,i=gets.chop*81,0
loop{system'cls&color 4'
$><<t[(i=(i+1)%80)..i+79] sleep 0.1}  ## Perl, 84 bytes (- 10% = 76) $_=' 'x80 .pop;$|=print"\b \r\e[31m".substr$_,++$p% length,80until select$z,$z,$z,.1


This takes a command line argument which is the text in the marquee.

Explanation:

1. Prepend 80 spaces to the text and store in $_ 2. Print backspace (\b) and a space ( ). This removes the last character from the previous print. Then print the carriage return and colour. 3. Print the 80 characters of the text from position $p
4. $p = ($p+1) % length of text
5. Sleep for 0.1 secs

# bash, 121 bytes

A=$(printf ' %.s' {1..80})$1
while :; do
printf "%s \r" "${A:((P++)):80}" if [$P == ${#A} ];then P=0 fi sleep 0.1 done  # Python 3, 96 bytes import time;s=input()*80 while 1:print("\033[2J",end=s[:80],flush=1);s=s[1:]+s[0];time.sleep(.1)  This will only work on terminals that support ANSI escape sequences. If you are on Windows, try ansicon. Hurrah for the flush keyword in Python 3, so we don't have to make an expensive sys.stdout.flush() call. ## C, 293 269 bytes (Newlines added for readability) This takes input from standard input terminated by EOF; so it's best to enter a string, a newline, and then the EOF (e.g., Ctrl^D). #include<stdio.h> #include<string.h> #define Z '\0' main(){int i=0,j;char m[80],o[80],n[2]; while(~(j=getchar())&&i<80)j-'\n'?m[i++]=j:0;m[i]=Z; while(1){for(i=0;m[i]-Z;++i){strcpy(o,&m[i]); for(j=0;j<i;)*n=m[j++],n[1]=Z,strcat(o,n); printf("\x1b[40;31m%s\x1b[0m\r",o);}}}  Ungolfed: #include <stdio.h> #include <string.h> #define ANSI_COLOR_SET "\x1b[40;31m" #define ANSI_COLOR_RESET "\x1b[0m" int main(void) { int i, j, c; char msg[80], out[80], next[2]; for (i = 0; (c = getchar()) != EOF && i < 80; ++i) { if (c != '\n') { msg[i] = c; } } msg[i - 1] = '\0'; while (1) { for (i = 0; msg[i] != '\0'; ++i) { strcpy(out, &msg[i]); for (j = 0; j < i; ++j) { next[0] = msg[j]; next[1] = '\0'; strcat(out, next); } printf(ANSI_COLOR_SET "%s\r" ANSI_COLOR_RESET, out); } } return(0); }  # SmileBASIC BIG, 79 bytes COLOR 3INPUT S$@L
CLS
FOR I=0TO 79?S$[(I+O)MOD LEN(S$)];
NEXT
WAIT 6O=O+1GOTO@L


I had a nice graphical solution almost done when I realized it has to scroll 1 whole character at a time.

# Jelly, 2019 18 bytes

• -1 byte by replacing the first 80 by ⁹ (= 256) because it has to be multiplied by at least 80
• -1 byte by changing infinite loop to Çß (from Ç1¿).

ẋ⁹ḣ80ṙ1;”ÆṄœS.1
Çß


With some tricks from @Dennis' answer here. Jelly is newer than the challenge, but not really specifically tailored for it. Suggestions on how to improve are welcome! If your console is in utf-8, run export LC_ALL=en_US or similar before trying.

## Explanation

ẋ⁹ḣ80ṙ1;”ÆṄœS.1         Monadic helper link - Argument: s
ẋ⁹                      Repeat s 256 times.
ḣ80                   Head. Set {output} to first 80 characters from repeated s.
ṙ1                 Rotate. Rotates {output} one character to the left.
;”Æ              Concatenate character 0D, the carriage return, to {output}.
Ṅ             Print and return {output}.
œS.1         Wait 0.1 seconds before returning {output} from the

Çß                      Monadic main link - Argument: s
Ç                       Execute helper link with argument s. Replace s by
result of helper link.
ß                      Execute this link with argument s (while true).


# LOVE2D Lua, 197-10% = 178 Bytes

f=io.open("t.t"):read().."  "love.graphics.setColor(255,0,0)love.window.setMode(640,14)function love.draw()s=""for i=1,80 do n=i+os.clock()s=s..f:sub(n%#f,n%#f) end love.graphics.print(s,0,0)end


Requires the input to be in a file called 't.t' in the root, thus 3 extra bytes were added to the score.

Really basic in functionality, just in a for loop of 80 iterations, append the character at index of i plus the current time in seconds modulated by the length of the current string, giving a repeated 80 character long string of the input, which shifts left as time goes on.

I used LOVE2D For the laughs.

# Sinclair ZX81/Timex TS1000/1500 BASIC, 110 bytes 182 bytes (for the listing)

1 LET A$="I LIKE TO SCROLL IT... HELLO MUM, BY DONKEYSOFT... THE QUICK BROWN FOX JUMPS OVER THE LAZY DOG... STILL SCROLLING... " 2 PRINT AT 0,0;A$(1 TO 80)
3 LET A$=A$(2 TO )+A$(1) 4 GOTO 3  It works by printing the first 32 80 characters of the string A$ at screen position 0,0 in line two, and then manipulating the string from position 2 to the end of the sting in line 3 (Sinclair ZX81 BASIC indexes strings from 1 and not zero), therefore adding the first character to the end and passing it back to the A$ variable; then there's a unconditional loop back to line 2. # Commodore 64, 434 bytes 0 A$="I LIKE TO SCROLL IT... SAMPLE SCROLLY ROUTINE FOR CODE-GOLF MADE BY DONKEYS
1 A$=A$+"OFT MMXVII... HELLO MUM... SCROLLING IS FUN, INNIT? GREETZ TO ALL...
2 POKE53280,6:PRINT"{CLEAR}";
3 PRINTLEFT$(A$,40)"{HOME}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}{DOWN}"MID$(A$,41,40)"{HOME}";
4 FORI=0TO99:NEXT:A$=RIGHT$(A$,142)+LEFT$(A$,1):GOTO3  As this requires 80 characters to show, and the C64 by default is only 40 characters, then 40 characters of the scrolly is printed on the top line of the screen area whilst the other 40 are printed near to the bottom. To clear up what the {HOME} and other symbols translate into as PETSCII then here is a screen grab taken from my emulator: I will do a full golfed-version when I get CBM PRG Studio installed (or when I'm not on lunch at work). # Ruby, 79 77 chars ->(s){t=0;loop{system("clear");puts (s*80)[t..(80+t)];t=(t+1)%80;sleep(0.1)}}  ### PHP, 136 bytes <?php$s="\e[0;31;40m".substr(str_repeat($argv[1],160),0,160); while(true){for($i=0;$i<=80;$i++){usleep(100000);echo substr($s,$i)."\r";}}die;

• Call it with php -f marquee.php hello\ world to marquee "hello world" string.
• For some reason, I had to do 160 characters for the initial string, else the output would be something like hello worlddddddddddddddddddddddddddddddddddddddd, but it'll only loop through 80 characters - I hope that still counts.

It's been a long day, there's probably something I can do to improve it

# PHP, 85 bytes

for(;;usleep(1e5))echo substr(str_repeat($s=$argv[1],80),$i=++$i%strlen($s),80),"\r";  takes input from first command line argument; run with -nr. Starts scrolling with the second character. Add one byte to start at the first character: Replace =++$i% with %= and ;; with ;;\$i++,.