# Shortest Floor Function

Your task is to implement a floor function in as few bytes as possible.

A floor function is a function that takes a real number and returns the largest integer less than or equal to the input.

Your program should support both positive and negative inputs. Since it is provably impossible to support all real numbers you need only support a reasonable subset of them. This subset should include positive numbers, negative numbers and of course numbers that are not integers. Such number systems include fixed-point numbers, floating point numbers and strings.

Your code may be a complete program or function.

This is so answers will be scored in bytes with less bytes being a better score.

• Any limits on the size of the numbers to be handled correctly? Need to treat negatives? – dmckee --- ex-moderator kitten Jan 31 '11 at 17:00
• I ask about range because single precision IEEE 745 floating point runs up to 2^127, which is to say that 64 bit integers would not be sufficient. – dmckee --- ex-moderator kitten Jan 31 '11 at 17:21
• @dmckee The problem definition states any real number, not just positive ones. As far as number size is concerned, let's assume that is not a concern (i.e., an answer that handles that case is not necessarily better than an answer that doesn't handle that case, unless of course it is of equal or lesser length). – Daniel Standage Jan 31 '11 at 19:39
• In golfscript, this would be zero bytes since x is already an integer :) – gnibbler Jan 31 '11 at 20:53
• @TheGuywithTheHat Type casting is fine, but this does not give the correct answer. – Daniel Standage Apr 7 '14 at 17:15

## 40 Answers

### PARI/GP (10)

In gp (and some other languages) x%1 gives the decimal part of x:

f(x)=x-x%1


NOTE: For negative x, x%1 returns (1 - abs(decimal part of x)), so the above works both for positive and negative numbers.

• @Joey: no it does not. Yields -4 for floor(-3.1234); -4 for floor(-4). What do you get? – Eelvex Jan 31 '11 at 17:10
• x - x % 1 gives -3 for -3.1234, surely, when the expected answer is -4 – Nellius Jan 31 '11 at 17:30
• @Nellius: NO, because -3.1234%1 = 0.8766. – Eelvex Jan 31 '11 at 17:39
• Ok, I take that back, partially. Because the sign of the modulus result depends on the operand in some languages but not in others. For me, -3.14 % 1 yields -.14 (PowerShell). Now, if you'd be so kind to make a null edit so I can take the downvote back? :-) – Joey Jan 31 '11 at 17:40
• You can shave off 2 characters with x->x-x%1. If not for the restriction you could use x->x\1 which is another 2 characters shorter. – Charles Apr 28 '15 at 14:48

## JavaScript, 503433 32 characters

function f(n){return~~n-(~~n>n)}


Works the same way as the PHP one I submitted.

• 32 chars if you drop the ; – zzzzBov Mar 12 '11 at 6:04
• If you use ES6, it is 14 characters:n=>~~n-(~~n>n) – Generic User Dec 26 '15 at 14:07

## DC (15 bytes)

Makes use of a nifty little trick that occurs during division in DC. Add a 'p' to then end to get output (it performs the floor correctly anyway), I assume that stuff is not already on the stack, and that input is in stdin.

[1-]sazk?z/d0>a


EG: echo 0 2.6 - | dc -e '[1-]sazk?z/d0>ap'

# Python (81)

def f(x):return str(x - float("." + str(float(x)).split('.')[-1])).split('.')

• You can go down to 76 bytes by removing unnecessary spaces! def f(x):return str(x-float("."+str(float(x)).split('.')[-1])).split('.') – Daniel Dec 26 '15 at 5:03

# Python (20)

f=lambda x:int(x//1)


or, if the result doesn't need to be of type int, 15 characters:

f=lambda x:x//1

• Two notes: 1. you can skip the f= part, as it is not recursive. 2. please state, that this is Python 3 code and not Python 2 – movatica Jan 21 at 17:06

### C (51)

int F(float x){int i=x-2;while(++i<=x-1);return i;}

• Generally code gold answers are expected to be in the form of either a function or a complete program (here the OP has selected a function), so you need the int f(float c){} bit. – dmckee --- ex-moderator kitten Jan 31 '11 at 17:32
• @dmckee: forgot that, sorry. – Eelvex Jan 31 '11 at 17:44
• Why <=x-1? would <x not be exactly the same thing, but 3 characters shorter? – Nellius Jan 31 '11 at 20:11
• @Nellius: no, it's not the same (unfortunately). – Eelvex Jan 31 '11 at 20:21
• @Nellius: only when x is an integer: compare "<=3.5-1" with "<3.5". – R. Martinho Fernandes Feb 2 '11 at 1:50

### LISP (26)

(Same trick as in PARI/GP answer)

(defun f(x)(- x(mod x 1)))

• You can strip off the space before the (mod. – Chris Jester-Young Jan 31 '11 at 20:06
• @Chris: :) Thx. – Eelvex Jan 31 '11 at 20:12

## C 126 (including NL)

Doesn't use any built-in conversion such as (int)x.

r(float x) {
int
p=*(int*)&x,
f=p&8388607|1<<23,
e=((p>>23)&255)-150;
if(e>0)f*=1<<e;
if(e<0)f/=1<<-e;
return p>>31?-f-1:f;
}


## J 7 chars

f=:-1&|  NB. x - (x mod 1)


eg.

f 3.14
3
f _3.14
_4

• Is there a good reason this isn't the accepted answer? – cat Dec 26 '15 at 20:02

## C (80)

Well it's not the shortest, but it's a great opportunity to show off my bit twiddling skills :D.

main(){int I,X=0x7FFFFF;scanf("%f",&I);printf("%d",((I&X)|X+1)>>-(I>>23)+150);}


# C, 42 41 bytes

int F(float x){int i=x;return i<=x?i:i-1;}


Try it online!

int F(float x){int i=x;return x>i?i:i-1;}


Try it online!

• Welcome to Code Golf, nice first answer! – Redwolf Programs Jan 21 at 14:21
• Hi there, welcome to CGCC. If you haven't seen it yet, tips for golfing in C and tips for golfing in <all languages> might be interesting to read through. :) Some golfs you could do to your current function: <= could be > (and the values swapped) for -1 byte; return  can be x= for -5 bytes; and you can remove the leading int  (it will give a warning, but we can ignore that) for -4 bytes. So in total: F(float x){int i=x;x=i>x?i-1:i;} (32 bytes). Enjoy your stay! :) – Kevin Cruijssen Jan 21 at 16:28
• @KevinCruijssen Thanks for the tips. I don't understand all your tips. It looks too nonstandard to me. So I only used your first tip. – elechris Jan 22 at 13:12

Ruby 1.9 (12 14)

 f=->x{x-x%1}


It's more a "for the record" type solution along the lines of the PARI/GP one.

>> f[3.4] #=> 3.0
>> f[-3.4] #=> -4.0

• You don't need the parentheses around x%1. – Ventero Mar 14 '11 at 19:22

# APL, 1 byte (SBCS)

According to the updated rules, built-ins are allowed:

⌊


# APL (dzaima/APL), 5 4 bytes

Anonymous tacit prefix function abiding by the old prohibition on built-ins:

⊢-1|


Try it online!

⊢ the argument

- minus

1| the division remainder when divided by 1

## Javascript - 6 bytes

Usage of the arrow function declaration (as an anonymous function here) and a bitwise "AND" operator

x=>x&x


Try it online!

or alternatively using the bitwise "OR" operator:

x=>x|0


Try it online!

• Welcome to the site! You can shave two bytes off, by removing the name of the function; as long as functions aren't recursive, the name isn't necessary. Also, is it possible to provide a link to a site such as TryItOnline where other users can verify your answer? – caird coinheringaahing Jul 14 '20 at 19:22
• Surely. Thank you for the advice :) – Maciej Siedlecki Jul 14 '20 at 21:10

## Perl (23)

$_=int($_)-(int($_)>$_)


Example:

perl -ple '$_=int($_)-(int($_)>$_)'


Every value entered on input will now be printed "floored".

Its bass5098's technique, but smaller =).

sub f{int($_)-(int($_)>$_)}  • Any particular reason for shying away from regex? – Codefun64 Dec 27 '15 at 7:07 C# (56 chars): My quick and naive answer earlier had a stupid logical flaw in it. Two approaches here, which I believe are both the same length. Double approach relies on the fact that casting to int removes the decimal part of a double. int F(double d){return(int)(d%1==0?d:(int)d-(d<0?1:0));}  Decimal approach relies on the fact that d%1 returns the decimal part of the number for decimal data type. int F(decimal d){return(int)(d%1==0?d:d-d%1-(d<0?1:0));}  Could save a few characters in both cases by returning their own type instead of int, but I feel a floor function should return an int. • You can use float instead and save a byte. – Joey Mar 12 '11 at 10:52 ## PHP, 514543 37 characters function f($n){return~~$n-(~~$n>$n);}  This should be able to be applied to most languages that do not support the n%1 trick. • Since this does not need to be an independently working program, I think you can safely trim the first 3 characters (i.e. the <? ) off your solution. – Daniel Standage Jan 31 '11 at 21:55 # RProgN 2, 4 bytes ]1%-  ## Explained ]1%- ] # Duplicate the implicit input 1% # Modulo 1 -# Subtract Modulo 1 of the input from the input, inplicitly outputting the floor'd result.  Try it online! # Java 8, 19 bytes Lambda from double to int. There are plenty of choices for types to assign to: Function<Double, Integer>, DoubleFunction<Integer>, or DoubleToIntFunction. n->(int)(n<0?n-1:n)  Try It Online # x86_64 machine language (Linux), 11 bytes 0: c4 e3 79 0b c0 01 vroundsd$0x1,%xmm0,%xmm0,%xmm0
6:       f2 0f 2c c0             cvttsd2si %xmm0,%eax
a:       c3                      retq


This requires a processor with AVX instructions.

To Try it online!, compile and run the following C program.

#include<stdio.h>
#include<math.h>
int f(double x){return floor(x);}
const char g[]="\xc4\xe3\x79\x0b\xc0\x01\xf2\x0f\x2c\xc0\xc3";

int main(){
for( double d = -1.5; d < 1.5; d+=.2 ) {
printf( "%f %d %d\n", d, f(d), ((int(*)(double))g)(d) );
}
}



# Julia, 17 bytes

f(x)=x-x%1-(x<0)


port of the PARI/GP answer

f(-pi) = -4
f(pi) = 3


# Turing Machine Code, 39 bytes

0 * * r 0
0 _ _ l 1
1 * _ l 1
1 . _ l 2


Try it online!

# Excel, 7

Tested in Excel Online. Closing parens not counted toward score.

The only reason I posted this is because, oddly enough, it seems to work the exact same as FLOOR.MATH() with 1 argument.

=INT(A1)


Semantically, at least to me, it would make sense if this didn't work for negative numbers. However, INT(-.5) is -1 for some reason. TRUNC() does what I think INT() should do.

# C (gcc), 16 15 bytes

g;f(d){g=d>>9;}


Try it online!

Such number systems include fixed-point numbers, floating point numbers and strings.

I don't know why people insist on using floats... Fixed point is much easier 🙂

Uses 32-bit fixed9 precision. Abuses arithmetic shift right. Return hack, not much else to say.

• I think you can save 3 bytes by cutting off g; and doing d>>=9; – Sheik Yerbouti Jan 21 at 19:31
• Nah, that doesn't work. Undefined behavior is weird. – EasyasPi Jan 22 at 3:11
• Oh all right, it was worth trying – Sheik Yerbouti Jan 22 at 12:56

# 05AB1E, 2 bytes

Oï


Explanation:

O   # Sum the stack, which will use the (implicit) input-string if the stack is empty
# (the input is read as string by default, so this O basically casts it to a float)
ï  # Floor this input-float
# (and output the resulting integer implicitly)


Although it may look pretty straight-forward, there are actually some things to note:

In the legacy version of 05AB1E, which was built in Python. The ï builtin would translate to the following code snippets:

# Pop number
a = str(number)         # Cast number to a string
a = ast.literal_eval(a) # Evaluate this string as Python structure (so it goes back to a float)
a = int(a)              # Cast this float to an integer (which will truncate)


So whether you had string input or decimal input, it would cast it to a string during the code execution anyway, before casting it to an integer to truncate all decimal values.

The new version of 05AB1E is built in Elixir however. Now, the ï builtin translates to the following code snippets (huge parts removed to only keep the relevant stuff):

call_unary(fn x -> to_integer(x) end, a)      # Call the function to_integer, which will:
# (I've only kept relevant parts of this function)
is_float(value) -> round(Float.floor(value)) #  If it's a float: floor it down
true ->                                      #  Else (it's a string):
case Integer.parse(to_string(value)) do  #   Parse it from string to integer
:error -> value                       #   If this resulted in an error: return as is
{int, string} ->
cond do                           #   Else it was parsed without errors:
Regex.match?(~r/^\.\d+$/, string) -> int # If it contains no decimal values: # Return parsed int true -> value # Else: return as is  Or as a TL;DR: float inputs are floored; string inputs are truncated. As you can see, a string input gives the incorrect floored result for negative decimals. Unfortunately, the default (implicit) input from STDIN is always a string, so we'll have to convert it to a float first (for which I've used O - which only works on an empty stack in the new 05AB1E version built in Elixir; for the legacy 05AB1E version built in Python, the sum would result in 0 for an empty stack). • In your TIO the floor of (for example) -4.7 is -4, but it actually is -5 – Sheik Yerbouti Jan 21 at 19:20 • @Davide Ah, I apparently had the output of negative values reversed. I thought the string input gave the correct results, but instead the float inputs give the correct results. Should be fixed now (at the cost of a byte). – Kevin Cruijssen Jan 22 at 7:40 • Yeah it works now, I am sorry for the 100% increase in the number of bytes – Sheik Yerbouti Jan 22 at 12:59 • @Davide haha, np. Due to lack of test cases, I simply reversed the intended outputs for negative inputs. Thanks for noticing! – Kevin Cruijssen Jan 22 at 13:09 # Vyxal, 3 bytes 1%-  Push input, modulo with 1 and negate! Try it! # Vyxal, 1 byte ⌊  Though a builtin..... Try it! # MATL, 5 bytes The programming language used in this answer was created after the challenge was posted. it1\-  ### Examples >> matl it1\- > 5.6 5 >> matl it1\- > -5.2 -6  ### Explanation Pretty straightforward. It uses a modulo operation with divisor 1. i % input t % duplicate 1 % number literal \ % modulus after division - % subtraction  • You should note that this language was developed wayyyyyy after this challenge. – cat Dec 26 '15 at 17:58 • @cat Sorry, I hadn't noticed. Disclaimer added – Luis Mendo Dec 26 '15 at 18:00 # Mouse-2002, 13 bytes Second place, ahh! (And this is a full program, not a function definition) ?&DUP &FRAC -  Take the fractional bit of the input and subtract it from the input. # Perl 5, 22 bytes s/\..+//&&$_<0?$_--:$_


This is larger than my first answer, which merely truncated the number - so, for negative numbers, it wasn't correct. This was due to a misunderstanding on my part of what a floor function does.

# RProgN, 1 byte

_


A builtin, thanks to the new challenge spec.

Try it online!