Quadratic residues are so much fun!

Question

Definitions

Quadratic residues

An integer \$r\$ is called a quadratic residue modulo \$n\$ if there exists an integer \$x\$ such that:

$$x^2\equiv r \pmod n$$

The set of quadratic residues modulo \$n\$ can be simply computed by looking at the results of \$x^2 \bmod n\$ for \$0 \le x \le \lfloor n/2\rfloor\$.

The challenge sequence

We define \$a_n\$ as the minimum number of occurrences of the same value \$(r_0-r_1+n) \bmod n\$ for all pairs \$(r_0,r_1)\$ of quadratic residues modulo \$n\$.

The first 30 terms are:

$$1, 2, 1, 1, 1, 2, 2, 1, 1, 2, 3, 1, 3, 4, 1, 1, 4, 2, 5, 1, 2, 6, 6, 1, 2, 6, 2, 2, 7, 2$$

This is A316975 (submitted by myself).

Example: \$n=10\$

The quadratic residues modulo \$10\$ are \$0\$, \$1\$, \$4\$, \$5\$, \$6\$ and \$9\$.

For each pair \$(r_0,r_1)\$ of these quadratic residues, we compute \$(r_0-r_1+10) \bmod 10\$, which leads to the following table (where \$r_0\$ is on the left and \$r_1\$ is on the top):

$$\begin{array}{c|cccccc} & 0 & 1 & 4 & 5 & 6 & 9\\ \hline 0 & 0 & 9 & 6 & 5 & 4 & 1\\ 1 & 1 & 0 & \color{blue}7 & 6 & 5 & \color{green}2\\ 4 & 4 & \color{magenta}3 & 0 & 9 & \color{red}8 & 5\\ 5 & 5 & 4 & 1 & 0 & 9 & 6\\ 6 & 6 & 5 & \color{green}2 & 1 & 0 & \color{blue}7\\ 9 & 9 & \color{red}8 & 5 & 4 & \color{magenta}3 & 0 \end{array}$$

The minimum number of occurrences of the same value in the above table is \$2\$ (for \$\color{green}2\$, \$\color{magenta}3\$, \$\color{blue}7\$ and \$\color{red}8\$). Therefore \$a_{10}=2\$.

Your task

• You may either:

  • take an integer \$n\$ and print or return \$a_n\$ (either 0-indexed or 1-indexed)
  • take an integer \$n\$ and print or return the \$n\$ first terms of the sequence
  • take no input and print the sequence forever

• Your code must be able to process any of the 50 first values of the sequence in less than 1 minute.

• Given enough time and memory, your code must theoretically work for any positive integer supported by your language.

• This is code-golf.

Answer 1

MATL, 14 bytes

:UG\u&-G\8#uX<

Try it online! Or verify the first 30 values.

Explanation

:      % Implicit input. Range
U      % Square, element-wise
G      % Push input again
\      % Modulo, element-wise
u      % Unique elements
&-     % Table of pair-wise differences
G      % Push input
\      % Modulo, element-wise
8#u    % Number of occurrences of each element
X<     % Minimum. Implicit display

Answer 2

Japt -g, 22 20 bytes

Spent too long figuring out what the challenge was actually about, ran out of time for further golfing :\

Outputs the nth term in the sequence. Starts struggling when input >900.

õ_²uUÃâ ïÍmuU
£è¥XÃn

Try it or check results for 0-50

---

Explanation

                  :Implicit input of integer U
õ                 :Range [1,U]
 _                :Map
  ²               :  Square
   uU             :  Modulo U
     Ã            :End map
      â           :Deduplicate
        ï         :Cartesian product of the resulting array with itself
         Í        :Reduce each pair by subtraction
          m       :Map
           uU     :  Absolute value of modulo U
\n                :Reassign to U
£                 :Map each X
 è                :  Count the elements in U that are
  ¥X              :   Equal to X
    Ã             :End map
     n            :Sort
                  :Implicitly output the first element in the array

Answer 3

Jelly,  13  10 bytes

-1 thanks to Dennis (forcing dyadic interpretation with a leading ð)
-2 more also thanks to Dennis (since the pairs may be de-duplicated we can avoid an R and a 2)

ðp²%QI%ĠẈṂ

A monadic link accepting a positive integer which yields a non-negative integer.

Try it online! Or see the first 50 terms.

How?

ðp²%QI%ĠẈṂ - Link: integer, n                   e.g. 6
ð          - start a new dyadic chain - i.e. f(Left=n, Right=n)
 p         - Cartesian product of (implicit ranges)  [[1,1],[1,2],[1,3],[1,4],[1,5],[1,6],[2,1],[2,2],[2,3],[2,4],[2,5],[2,6],[3,1],[3,2],[3,3],[3,4],[3,5],[3,6],[4,1],[4,2],[4,3],[4,4],[4,5],[4,6],[5,1],[5,2],[5,3],[5,4],[5,5],[5,6],[6,1],[6,2],[6,3],[6,4],[6,5],[6,6]]
  ²        - square (vectorises)                     [[1,1],[1,4],[1,9],[1,16],[1,25],[1,36],[4,1],[4,4],[4,9],[4,16],[4,25],[4,36],[9,1],[9,4],[9,9],[9,16],[9,25],[9,36],[16,1],[16,4],[16,9],[16,16],[16,25],[16,36],[25,1],[25,4],[25,9],[25,16],[25,25],[25,36],[36,1],[36,4],[36,9],[36,16],[36,25],[36,36]]
   %       - modulo (by Right) (vectorises)          [[1,1],[1,4],[1,3],[1,4],[1,1],[1,0],[4,1],[4,4],[4,3],[4,4],[4,1],[4,0],[3,1],[3,4],[3,3],[3,4],[3,1],[3,0],[4,1],[4,4],[4,3],[4,4],[4,1],[4,0],[1,1],[1,4],[1,3],[1,4],[1,1],[1,0],[0,1],[0,4],[0,3],[0,4],[0,1],[0,0]]
    Q      - de-duplicate                            [[1,1],[1,4],[1,3],[1,0],[4,1],[4,4],[4,3],[4,0],[3,1],[3,4],[3,3],[3,0],[0,1],[0,4],[0,3],[0,0]]
     I     - incremental differences (vectorises)    [0,3,2,-1,-3,0,-1,-4,-2,1,0,-3,1,4,3,0]
      %    - modulo (by Right) (vectorises)          [0,3,2,5,3,0,5,2,4,1,0,3,1,4,3,0]
       Ġ   - group indices by value                  [[1,6,11,16],[10,13],[3,8],[2,5,12,15],[9,14],[4,7]]
        Ẉ  - length of each                          [3,2,2,4,2,2]
         Ṃ - minimum                                 2

Answer 4

05AB1E, 22 20 15 13 bytes

LnI%êãÆI%D.m¢

-2 bytes thanks to @Mr. Xcoder.

Try it online or verify the first 99 test cases (in about 3 seconds). (NOTE: The Python legacy version is used on TIO instead of the new Elixir rewrite. It's about 10x faster, but requires a trailing ¬ (head) because .m returns a list instead of a single item, which I've added to the footer.)

Explanation:

L       # Create a list in the range [1, (implicit) input]
 n      # Square each
  I%    # And then modulo each with the input
    ê   # Sort and uniquify the result (faster than just uniquify apparently)
 ã      # Create pairs (cartesian product with itself)
  Æ     # Get the differences between each pair
   I%   # And then modulo each with the input
D.m     # Take the least frequent number (numbers in the legacy version)
   ¢    # Take the count it (or all the numbers in the legacy version, which are all the same)
        # (and output it implicitly)

Answer 5

C (gcc), 202 200 190 188 187 186 bytes

• Saved two twelve fourteen fifteen bytes thanks to ceilingcat.
• Saved a byte.

Q(u,a){int*d,*r,A[u],t,i[a=u],*c=i,k;for(;a--;k||(*c++=a*a%u))for(k=a[A]=0,r=i;r<c;)k+=a*a%u==*r++;for(r=c;i-r--;)for(d=i;d<c;++A[(u+*r-*d++)%u]);for(t=*A;++a<u;t=k&&k<t?k:t)k=A[a];u=t;}

Try it online!

Answer 6

Python 2, 97 bytes

def f(n):r={i*i%n for i in range(n)};r=[(s-t)%n for s in r for t in r];return min(map(r.count,r))

Try it online!

Answer 7

K (ngn/k), 29 bytes

{&/#:'=,/x!r-\:r:?x!i*i:!x}

Try it online!

{ } function with argument x

!x integers from 0 to x-1

i: assign to i

x! mod x

? unique

r: assign to r

-\: subtract from each left

r-\:r matrix of all differences

x! mod x

,/ concatenate the rows of the matrix

= group, returns a dictionary from unique values to lists of occurrence indices

#:' length of each value in the dictionary

&/ minimum

Answer 8

Wolfram Language (Mathematica), 64 bytes

Min[Last/@Tally@Mod[Tuples[Union@Mod[Range@#^2,#],2].{1,-1},#]]&

Try it online!

Answer 9

Ruby, 88 bytes

->n{(z=(w=(0..n).map{|x|x*x%n}|[]).product(w).map{|a,b|(a-b)%n}).map{|c|z.count(c)}.min}

Try it online!

Answer 10

APL (Dyalog Unicode), 28 24 bytes

{⌊/⊢∘≢⌸∊⍵|∘.-⍨∪⍵|×⍨⍳⍵+1}

Try it online!

Prefix direct function. Uses ⎕IO←0.

Thanks to Cows quack for 4 bytes!

How:

{⌊/⊢∘≢⌸∊⍵|∘.-⍨∪⍵|×⍨⍳⍵+1} ⍝ Dfn, argument ⍵

                   ⍳⍵+1 ⍝ Range [0..⍵]
                 ×⍨     ⍝ Squared
               ⍵|       ⍝ Modulo ⍵
              ∪         ⍝ Unique
          ∘.-⍨          ⍝ Pairwise subtraction table
       ∊⍵|              ⍝ Modulo ⍵, flattened
      ⌸                 ⍝ Key; groups indices (in its ⍵) of values (in its ⍺).
   ⊢∘≢                  ⍝ Tally (≢) the indices. This returns the number of occurrences of each element.
 ⌊/                      ⍝ Floor reduction; returns the smallest number.