# Can I restack the buckets?

My little kid has a toy like this: This toy consists of 10 stackable little buckets, that we are going to number from 1 (the smallest one) to 10 (the biggest one). Sometimes he makes small piles and the toy ends up like this: We can represent schematically the piles like this:

      1  6
4  9  2  7
5  10 3  8
----------  <-- Floor
1  2  3  4  <-- Pile #


Or, put it another way:

[[4,5],[9,10],[1,2,3],[6,7,8]]


This set of bucket piles is easily restackable to rebuild the original set (the first image) just by consecutively placing piles of smaller buckets inside piles of bigger buckets:

                             1                            1  6
2                            2  7
1  6                   3        6                   3  8
4  9  2  7                   4  9     7                   4  9
5  10 3  8                   5  10    8                   5  10
---------- > [Pile 3 to 1] > ---------- > [Pile 4 to 2] > ---------- > [Pile 1 to 2] > Done!
1  2  3  4                   1  2  3  4                   1  2  3  4


Nonetheless, sometimes my kid tries to build towers, or throws buckets away, and the piles end up being inconsistent and the original set cannot be rebuild just by placing one pile inside another. Examples of this:

[[1,3,2],] (the kid tried to build a tower by placing a bigger bucket
over a smaller one, we would need to reorder the buckets
first)
[[1,3,4],] (the kid left aside an unordered bucket, we would need to remove
bucket #1 from pile #1 before restacking)
[[1,2,3],] (the kid lost a bucket, we need to find it first)


### Challenge

Given a list of lists of integers representing a set of bucket piles, return a truthy value if the lists represent an easily restackable set of piles, or falsey in any other case.

• Input will be given as a list of lists of integers, representing the buckets from top to bottom for each stack.
• There won't be empty starting piles (you won't get [[1,2,3],[],[4,5]] as input).
• The total number of buckets can be any within a reasonable integer range.
• My kid only has one set of buckets so there won't be duplicate elements.
• You can select any two consistent (and coherent) values for truthy or falsey.
• The buckets will be labelled from #1 to #N, being N the largest integer in the lists of integers. My kid still does not know the concept of zero.
• You may receive the input in any reasonable format as long as it represents a set of piles of buckets. Just specify it in your answer if you change the way you receive the input.
• This is , so may the shortest program/function for each language win!

### Examples

Input:  [[4,5],[9,10],[1,2,3],[6,7,8]]
Output: Truthy

Input:  [[6,7,8,9,10],,,[3,4,5],[11,12,13]]
Output: Truthy

Input:  [[2,3,4],,[5,6,7]]
Output: Truthy

Input:  [[1,2],[5,6],[7,8,9]]
Output: Falsey (buckets #3 and #4 are missing)

Input:  [[2,3,4],[5,6,7]]
Output: Falsey (bucket #1 is missing)

Input:  [[1,3,4],[5,7],[2,6]]
Output: Falsey (non-restackable piles)

Input:  [[1,4,3],,[5,6]]
Output: Falsey (one of the piles is a tower)

• This comes from the sandbox. Aug 4, 2017 at 7:47
• @Mr.Xcoder no, there won't be duplicate elements (my kid only has one set of buckets and they are all different. Aug 4, 2017 at 7:55
• May we assume that bucket 1 is never missing? Aug 4, 2017 at 8:50
• @Pietu1998 bucket #1 can be missing, I just added a test case (in fact, the smallest bucket is the easiest to lose). Aug 4, 2017 at 8:54
• The various Tower of Hanoi challenges are related (not duplicates) of this. Aug 4, 2017 at 15:04

# Jelly, 6 5 bytes

Thanks to @Lynn for saving 1 byte.

ṢFµJ⁼


Try it online! (comes with test-suite footer)

### Explanation

ṢFµJ⁼    Main link. Argument: piles
Ṣ          Sort the piles by the size of the top bucket.
F         Stack the piles, putting the left one to the top.
J       See what a full pile with this many buckets would look like.
⁼      See if that looks like the pile you built.

• I think ṢFµJ⁼ works, but I haven’t thought about all the edge cases.
– Lynn
Aug 4, 2017 at 8:40
• @Lynn That works assuming bucket 1 isn't missing. I'm not sure if this is guaranteed by the OP. Aug 4, 2017 at 8:49
• @Lynn bucket #1 can be missing, yes. I just added a new test case. Aug 4, 2017 at 8:53
• If there are buckets missing, then the sorted list will always contain numbers larger than J can return, guaranteeing false output. am I missing something?
– Lynn
Aug 4, 2017 at 8:57
• I think you can still use the 5-byte version with bucket #1 missing? Aug 4, 2017 at 8:58

# Python 2, 53 52 bytes

Thanks for the byte xnor

lambda x:sum(sorted(x),)==range(len(sum(x,[]))+1)


Try it online!

• I like that starting the sum at []. Pretty tricky Aug 4, 2017 at 13:43
• You can save a byte by starting the sum at  so that the range can start from 0.
– xnor
Aug 6, 2017 at 7:00

## JavaScript (ES6), 59 58 bytes

a=>!(a.sort((a,[b])=>a[i=0]-b)+'').split,.some(v=>v-++i)


### Explanation

a=>                                                        // given a 2D-array 'a'
a.sort((a,[b])=>a[i=0]-b)                             // sort by first item
+''                          // flatten
(                            ).split,                // split again
.some(v=>v-++i) // i such that a[i] != i+1?
!                                                       // true if none was found


### Test cases

let f =

a=>!(a.sort((a,[b])=>a[i=0]-b)+'').split,.some(v=>v-++i)

// truthy
console.log(f([[4,5],[9,10],[1,2,3],[6,7,8]]))
console.log(f([[6,7,8,9,10],,,[3,4,5],[11,12,13]]))
console.log(f([[2,3,4],,[5,6,7]]))

// falsy
console.log(f([[1,2],[5,6],[7,8,9]]))
console.log(f([[2,3,4],[5,6,7]]))
console.log(f([[1,3,4],[5,7],[2,6]]))
console.log(f([[1,4,3],,[5,6]]))

# 05AB1E, 4 bytes

{˜āQ


Try it online!

import Data.List
f l=(sort l>>=id)==[1..length$l>>=id]  Try it online! # Haskell, 37 bytes import Data.List (<[1..]).concat.sort  Try it online! Checks whether the concatenated sorted list is lexicographically smaller than the infinite list [1,2,3,...]. Since there are no duplicates, any missing bucket or out-of-order bucket would cause a value greater than k in the k'th place, making the resulting list be bigger.. # Pyth, 6 bytes UItMsS  Try it here. Explanation: UItMsSQ UI Invariant from U (range(len(A)) for our purpose) tM Map t (A - 1 for our purpose) s s (flatten 1-deep for our purpose) S S (sort for our purpose) Q Q (autoinitialized to input) (implicit)  • Wat?! Add an explanation to the UI part, please Aug 4, 2017 at 9:12 • @Mr.Xcoder U <col> is range(len(A)), I <pfn> <any> <n-1:any> is A(B, ...) == B. Aug 4, 2017 at 9:14 • Then I got terribly outgolfed >.<. I might golf mine, though. Genius, brilliant solution, now that I see how it works... Congrats! Aug 4, 2017 at 9:14 • @Mr.Xcoder It's really just searching the docs for stuff... Aug 4, 2017 at 9:51 • No, it's not. I knew that U <col> is range(len(A)), but I didn't realise that porting the Python solution would be shorter... Aug 4, 2017 at 9:52 # PROLOG (SWI), 54 bytes s(L):-sort(L,M),flatten(M,N),last(N,O),numlist(1,O,N).  Now that's better. Still quite verbose, alas. Try it online! The s/1 predicate takes a list as argument and is true if the list is a list of easily stackable buckets. Improvement in algorithm: if I sort the list before I flatten it, this forces all the sublists to be sorted for the predicate to be true. Slightly "borrowed" from Pietu1998's Jelly answer. Thanks to that I can dump the forall which is more than half of the program (see below for the original answer). ## How does it work? The predicate is true if all of its clauses are true: s(L) :- sort(L,M), % M is L sorted in ascending order flatten(M,N), % N is the 1-dimention version of M last(N,O), % O is the last elemnt of N numlist(1,O,N). % N is the list of all integers from 1 to O  ## Previous answer, PROLOG (SWI), 109 bytes s(L):-flatten(L,M),sort(M,N),last(N,O),numlist(1,O,N),forall(member(A,L),(A=[B|_],last(A,C),numlist(B,C,A))).  Try it online! # Pyth, 9 16 11 bytes (Fixed) Uses a completely different method from the other answer. A shorter, 7-byte approach can be found below. !.EtM.++0sS  Test Suite. # Explanation !.EtM.++0sSQ -> Full program, with implicit input at the end. SQ -> Sort the input by the highest element in each sublist. s -> Flatten. +0 -> Prepend a 0. .+ -> Get the deltas of the list (i.e. differences between consecutive elements) tM -> Decrement each element. .E -> Any truthy element (1s are truthy, 0s are falsy) ! -> Negate (to have coherent truthy / falsy values)  # How does this work? Let's take a couple of examples, which make it easier to understand. Let's assume the input is [[1,3,4],[5,7],[2,6]]. The core of this algorithm is that each delta in the unflattened list must be 1 in order for the buckets to be stackable. • First off, S turns it into [[1, 3, 4], [2, 6], [5, 7]]. • Then, s flattens it: [1, 3, 4, 2, 6, 5, 7]. • Prepend a 0 in front: [0, 1, 3, 4, 2, 6, 5, 7] • .+ gets the deltas of the list, [1, 2, 1, -2, 4, -1, 2]. • tM decrements each element, [0, 1, 0, -3, 3, -2, 1]. • Any non-0 integer is truthy in Pyth, so we check if there is any truthy element with .E (which means the stack cannot be formed correctly). We get True. • ! negates the result, which turns True into False. If the input was, for example, [[6,7,8,9,10],,,[3,4,5],[11,12,13]], the algorithm would work this way: • Sorted by the highest element: [, , [3, 4, 5], [6, 7, 8, 9, 10], [11, 12, 13]] and flattened, with a 0 prepended: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13]. • Deltas: [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1]. All get decremented: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]. • There is no truthy element, so we get False. By logical negation, the result is True. # Pyth, 7 bytes qSlsQsS  Test Suite. Port of the Python answer and a variation of @Erik's solution. • Thank you very much for taking the time to explain how this works! Aug 4, 2017 at 8:31 • Aug 4, 2017 at 8:48 • @Mr.Xcoder What do you mean by tM decrements each element? I would think that decrementing each element of [1, 2, 1, -2, 4, -1, 2] would yield [0, 1, 0, -3, 3, -2, 1]. But that wouldn't help solve the problem, so I must be misunderstanding what decrementing each element means. Aug 4, 2017 at 19:15 • @BrianJ tM decreases each element in the list by 1. There is a mistake in my explanation. Will fix. Aug 4, 2017 at 19:16 • @BrianJ Fixed. Thanks for spotting that Aug 4, 2017 at 19:17 # Brachylog, 5 bytes oc~⟦₁  Try it online! Explained unifications: ?o₀c₀~⟦₁. ? The input (implicit) o₀ Sorted (subscript default = 0 => ascending) c₀ Concatenated (subscript default = 0 => no length check) ~ Inverse (find the input) ⟦₁ Range (subscript = 1 => [1..input]) . The output (implicit)  Analytical explanation: First of all we sort the list of lists, and then we concatenate (i.e. flatten 1-deep) (oc) so that the buckets get stacked right-to-left if possible. Then, to check if the buckets have been stacked correctly (i.e. no missing buckets or towers), we check that the resulting list is an inclusive range from 1 to its length. Now, instead of equal-checking the list with the [1..n] range of its length ({l⟦₁?}), we try to find an input to a function that generates such a range (~⟦₁), if there is one. If an input is found, then the program ends with no issues, so it triggers a true. status. If no input is found, the program fails, triggering a false. status. # Python 2, 43 bytes lambda l:sum(sorted(l),)<range(len(l))  Try it online! Checks whether the concatenated sorted list is lexicographically smaller than [1,2,3,...N] for large N. Since there are no duplicates, any missing bucket or out-of-order bucket would cause a value greater than k in the k'th place, making the resulting list be bigger. The string-length of the input suffices as an upper bound since each numbers takes more than 1 character. • Nice, I thought there should be a way to improve substantially on my solution, and this it it! Aug 7, 2017 at 8:38 # MATL, 5 bytes Sgtf=  Try it online! (Implicit input, say {[4,5],[9,10],[1,2,3],[6,7,8]}) S - sort input arrays in lexicographic order ({[1,2,3],[4,5],[6,7,8],[9,10]}) g - convert into a single array (cell2mat) t - duplicate that f - find indices of non-zero values. Since input here is all non-zeros, returns the list of indices from 1 to length(array) ([1,2,3,4,5,6,7,8,9,10],[1,2,3,4,5,6,7,8,9,10]) = - check that the array is equal to the range 1 to length(array) # Japt, 1312 11 bytes This could probably be shorter. ñÎc äaT e¥1  • 1 byte saved thanks to ETH ## Explanation  :Implicit input of 2D array U ñÎ :Sort sub-arrays by their first element c :Flatten T :Prepend 0 äa :Consecutive absolute differences e¥1 :Does every element equal 1?  • Yeah, you're right I think. It was worth a shot though Aug 4, 2017 at 14:20 • I think you can save a byte on the last line with either ä-0 e¥J or än0 e¥1 Aug 4, 2017 at 16:34 • Another similar 13-byte solution: ethproductions.github.io/japt/… Aug 4, 2017 at 16:38 • @ETHproductions, I have no idea what's happening there! :D Don't think I've had occasion to touch ä for arrays yet. Thanks for the saving. Aug 4, 2017 at 16:45 • @LuisfelipeDejesusMunoz It works when you use the first line of this solution and the second line of the linked solution, just as I said, nine bytes: codegolf.stackexchange.com/a/168967/16484 Jul 20, 2018 at 21:44 ## Scala, 49 Bytes p=>{val s=p.sortBy(_(0)).flatten s==(1 to s.max)}  Ungolfed: piles: List[List[Int]] => { val sorted = piles.sortBy(pile=>pile(0)).flatten //Since piles are sequential, we can sort them by their first element sorted == (1 to sorted.max) //If all the buckets are present and in order, after sorting them it should be equivalent to counting up from 1 to the max bucket }  # Japt, 9 bytes ñg c eUÌõ  Try it online! • Don't forget the new shortcut for g<space> ;) Jul 24, 2018 at 14:50 # R, 58 bytes function(v,a=unlist(v[order(sapply(v,min))]))any(a-seq(a))  Try it online! N.B. : FALSE is the truthy outcome, TRUE is the falsy one • -3 bytes thanks to @JayCe Explanation : a=unlist(v[order(sapply(v,min))]) # order the list of vector by the min value and flatten all(a==seq(a=a)) # if the flattened list is equal to 1:length then it's ok  • Simply seq(a) for 2 byte?. Also, it's allowed to use TRUE as a falsy value and vice versa (just specify in your answer), so you can do any(a-seq(a)) for another byte. Jul 20, 2018 at 17:51 • @JayCe: I'm a fool... I was so concerned about seq(a) behaving differently when a is of length 1 and I missed that in this case we'll get the same results :D THanks ! Jul 20, 2018 at 19:37 # C# (.NET Core), 157145 132 bytes -13 bytes thanks to TheLethalCoder l=>{var k=l.OrderBy(x=>x).SelectMany(x=>x);return!Enumerable.Range(1,k.Count()).Zip(k,(x,y)=>x==y).Any(x=>!x);}  Byte count also includes using System.Linq;  Try it online! Ungolfed: l => { var k = l.OrderBy(x=>x) // First, sort stacks by first bucket .SelectMany(x => x); // Concatenate stacks into one return !Enumerable.Range(1, k.Count()) // Create a sequence [1...n] .Zip(k, (x, y) => x == y) // Check if our big stack corresponds the sequence .Any(x => !x); // Return if there were any differences };  • x.First() -> x? Enumerable.Range -> new int[] and Zip with index if possible..? Remove Where and place the condition into Any. Aug 4, 2017 at 10:05 • @TheLethalCoder Thank you for the tips! And the new int[] approach would require adding a Select() to get the index, and ultimately make the byte count bigger. Aug 4, 2017 at 10:24 # CJam, 11 bytes {$:+:(_,,=}


Try it online!

Oww :(...yeah! {\$:+_,,:)=}

# Charcoal, 19 bytes (non-competing?)

Ａ▷m⟦▷s▷vθυ⟧θ⁼θ…·¹Ｌθ


Try it online!

-10 bytes thanks to ASCII-only.

-3 bytes thanks to ASCII-only for a subsequent implementation (see revision history for possibly competing version).

- for truthy, for falsy.

Input is a singleton list of a list of lists, because of how Charcoal takes input.

• It's the first answer in Charcoal I see that uses ＵＰ. Aug 5, 2017 at 20:05
• @CarlosAlejo I had to find a way to sort, and the easiest way was just ＵＰsorted. Aug 5, 2017 at 20:06
• 24 bytes Aug 7, 2017 at 1:54
• the ▷ used there makes scope things the priority though so that;s why ＵＰ is still there but i guess you can just avoid using python function names as varnames? Aug 7, 2017 at 1:56
• yay added eval as v, also O_O this isn't even an ascii art challenge (no wonder it's so ungolfy :P Aug 8, 2017 at 0:44

# Vyxal, 5 bytes

sf₅ɾ⁼


Try it Online!

s     # Sort
f    # Flatten
₅ɾ  # 1...a.length
⁼ # Is equal?


# Java 10, 213 bytes

import java.util.*;m->{Arrays.sort(m,(a,b)->Long.compare(a,b));var r=Arrays.stream(m).flatMapToInt(Arrays::stream).toArray();return Arrays.equals(r,java.util.stream.IntStream.range(1,r.length+1).toArray());}


Try it online.

It seemed like a good idea when I started, but these builtins only make it longer.. Can definitely be golfed by using a more manual approach..

Inspired by @EriktheOutgolfer's 4-byte 05AB1E answer. 4 vs 213 bytes, rofl.. >.>

Explanation:

import java.util.*;      // Required import for Arrays
m->{                     // Method with 2D integer-array parameter and boolean return-type
Arrays.sort(m,         //  Sort the 2D input-array on:
(a,b)->Long.compare(a,b));
//  The first values of the inner arrays
var r=Arrays.stream(m).flatMapToInt(Arrays::stream).toArray();
//  Flatten the 2D array to a single integer-array
return Arrays.equals(r,  //  Check if this integer-array is equal to:
java.util.stream.IntStream.range(1,r.length+1).toArray());}
//  An integer-array of the range [1, length+1]