# Weakened Binary Walls

Inspired by Create a binary wall

Given a list of positive integers, we can write them out all above each other like so, for [2, 6, 9, 4] as an example:

0010
0110
1001
0100


We can imagine this as a wall:

..#.
.##.
#..#
.#..


However, this is a very weak wall, and it has collapsed! Each 1 (#) falls down until it hits the "ground" or another 1 (#). The 0s (.s) are present in spots left by moved 1s.

This becomes the following:

....
....
.##.
####


Which translates back to:

0000
0000
0110
1111


Which, as a list of numbers, is [0, 0, 6, 15].

# Another test case

[10, 17, 19, 23]


This becomes:

01010
10001
10011
10111


which becomes:

00000
10011
10011
11111


translating back to:

[0, 19, 19, 31]


# Challenge

Given a list of positive integers, apply this transformation to the list. Input/Output as lists of positive integers in any reasonable format. Standard loopholes apply.

This is a , so the shortest answer in bytes wins!

• Sandbox Post – hyper-neutrino Jul 29 '17 at 19:36
• More testcases? You know, non-square testcases would be good. – Leaky Nun Jul 29 '17 at 19:44
• @LeakyNun Sure. I'll do that. – hyper-neutrino Jul 29 '17 at 19:44
• That's just a sorting problem for bit arrays. – Marcus Müller Jul 30 '17 at 19:50
• @MarcusMüller You're right - I realized that after the MATL answer :P – hyper-neutrino Jul 30 '17 at 20:14

# MATL, 4 bytes

BSXB


Try it at MATL Online

Explanation

    % Implicitly grab input as an array
%   STACK: [10, 17, 19, 23]
B   % Convert each element to binary where each decimal number results in a row
%   STACK: [0 1 0 1 0;
%           1 0 0 0 1;
%           1 0 0 1 1;
%           1 0 1 1 1]
S   % Sort each column, placing all of the 1's at the bottom of each column
%   STACK: [0 0 0 0 0;
%           1 0 0 1 1;
%           1 0 0 1 1;
%           1 1 1 1 1]
XB  % Convert each row from its binary representation to its decimal number
%   STACK: [0, 19, 19, 31]
% Implicitly display the result

• o_O How does this work :o – hyper-neutrino Jul 29 '17 at 19:48
• Did MATL just out-golf Jelly by 4 bytes? o_O – totallyhuman Jul 29 '17 at 19:49
• 5 bytes now :-p – Leaky Nun Jul 29 '17 at 19:52
• I never thought there'd be a built-in to move the ones to the bottom xD +1 – hyper-neutrino Jul 29 '17 at 19:52
• @totallyhuman well, wait till Dennis comes – JungHwan Min Jul 29 '17 at 23:58

# Python, 68 bytes

f=lambda a:a and[x|y&a[0]for x,y in zip([0]+f(a[1:]),f(a[1:])+[-1])]


Try it online!

## JavaScript (ES6), 50 bytes

f=a=>a.map(_=>a.map((e,i)=>a[a[i]|=a[--i],i]&=e))&&a


Explanation: Suppose two rows of the wall were like this:

0011
0101


The result needs to be this:

0001
0111


In other words, the first row becomes the AND of the two rows and the second row becomes the OR of the two rows. This just needs to be repeated enough times for all the bits to fall to the bottom.

# Jelly, 9 bytes

BUz0Ṣ€ZUḄ


Try it online!

# Python 3.5, 60 bytes

def f(a,*t):
if t:b,*r=f(*t);t=f(a|b,*r);a&=b
return(a,*t)


Try it online!

Takes input like f(2, 6, 9, 4). Assumes input is non-empty. Uses a lot of tuple unpacking.

# Japt, 16 bytes

m¤z3 ®¬n qÃz mn2


Try it online! using the -Q flag to format the array result.

## Explanation

m¤z3 ®¬n qÃz mn2    Implicit: U = input array.
[10, 17, 19, 23]
m¤z3                Map U to binary strings and rotate the array left 90°
1010       0111
10001   ->  1011
10011       0001
10111       1000
111
®¬n qÃ              Sort each binary string, putting 0s and spaces at the start
0111
0111
0001
0001
111
z mn2               Rotate right 90° and convert each back to a number
0000       0
10011   ->  19
10011       19
11111       31
Implicit output of resulting array

• I think you can save a byte with mì2 z3 mn z mì2 – ETHproductions Jul 30 '17 at 1:10
• @ETHproductions It seems rotating the 2D array, instead of rotating the array of strings, pads each inner array with null instead of spaces. So that doesn't seem to work. And null is sorted to the right of the 1s, unlike spaces, which are sorted to the left. – Justin Mariner Jul 30 '17 at 1:15

# Mathematica, 64 bytes

#~FromDigits~2&/@(Sort/@(PadLeft[#~IntegerDigits~2&/@#]))&


This converts the input (a list of numbers) to a list of lists of digits, pads it to be a square matrix, transposes it, sorts the rows so the 1's "fall" to the bottom, transposes back, then converts back into numbers.

# Octave, 29 25 bytes

4 bytes saved thanks to @Stewie

@(x)bi2de(sort(de2bi(x)))

• de2bi/bi2de saves 4 bytes in octave. Works on octave-online.net. – Stewie Griffin Jul 30 '17 at 15:27
• @StewieGriffin Thanks! – Suever Jul 30 '17 at 18:02

# J, 13 bytes

/:~"1&.|:&.#:


Try it online!

## Explanation

/:~"1&.|:&.#:  Input: array M
#:  Convert each in M to binary with left-padding
|:&     Transpose
/:~"1&         Sort each row
&.|:      Inverse of transpose (which is just transpose)
&.#:  Inverse of converting to binary

• There's that binary left-padding again, +1. And also, can you explain why you would need to use the inverse of transpose, since it is just transpose? – Adalynn Jul 30 '17 at 15:32
• @Zacharý The inverses are used to undo the operations used before sorting each row. It's true that the inverse of transpose is just transpose, but another way to see this is as <convert from binary> <transpose> <sort each row> <transpose> <convert to binary> M, where the first two functions are just the inverses of the last two. – miles Aug 1 '17 at 2:58

# 05AB1E, 9 bytes

bí0ζR€{øC


Try it online!

Kinda different algorithm from Magic's.

• ζ, damnit. Deleted mine, take my +1. – Magic Octopus Urn Jul 31 '17 at 13:28
• @MagicOctopusUrn Why did you delete yours? No need to. – Erik the Outgolfer Jul 31 '17 at 13:29
• It's not really much different (in terms of algorithm) and this was 25% better. – Magic Octopus Urn Jul 31 '17 at 13:31

# Dyalog APL, 2421 19 bytes

2⊥↑{⍵[⍋⍵]}¨↓2⊥⍣¯1⊢⎕


Try it online! (modified so TryAPL accepts it as valid)

### How?

• ⎕ evaluated input (arrays are space separated)
• 2⊥⍣¯1⊢ converts each each of the arguments to binary (transposed of what is in the question)
• ↓ turns a 2D array into a vector of vectors
• {⍵[⍋⍵]}¨ sorts each of the elements of the vector
• ↑ turns the vector of vectors into a 2D array again
• 2⊥ convert from binary (since it sort of transposes it, we arrive at the correct result)

# Dyalog APL (23 characters)

{2⊥¨↓⍉↑{⍵[⍋⍵]}¨↓2⊥⍣¯1⊢⍵}

1. Convert the input arguments into a binary matrix
2. Split the matrix into columns
3. Sort the columns into ascending order
4. Convert the sorted rows back into decimal

## Example

  {2⊥¨↓⍉↑{⍵[⍋⍵]}¨↓2⊥⍣¯1⊢⍵}10 17 19 23
0 19 19 31


Thanks to Zacharý for correcting me on this one.

• You can replace with (⊥⍣¯1)⍵ with ⊥⍣¯1⊢⍵. Also, I don't think you need the axis specification on split (↓[1]=>↓). – Adalynn Jul 30 '17 at 14:33
• Oh, and you're supposed to convert it back to a list! – Adalynn Jul 30 '17 at 14:46
• This is invalid. – Adalynn Jul 30 '17 at 17:28
• Thank you, Zacharý, I was working on this late last night and I think I misread the problem. I've modified my solution now. – James Heslip Jul 30 '17 at 18:59
• Well, good job! (⊥⍣¯1 really needs to be a builtin). And thank you for actually getting my username right. – Adalynn Jul 30 '17 at 19:32

# JavaScript, 127 125 bytes

a=>a[m='map'](_=>b[m]((n,i)=>n&&(b[i]--,d|=1<<i),d=0)&&d,b=[...Array(32)][m]((_,c)=>a[m](e=>d+=!!(2**c&e),d=0)&&d)).reverse()


Try it online

-2 bytes thanks to Cows quack

• (1<<c)&e can become 2**c&e – user41805 Jul 29 '17 at 20:30

## Python 2, 142 bytes

... and still golfing... hopefully –– Any help appreciated!

def c(l):b=[bin(n)[2:]for n in l];print[int(n,2)for n in map(''.join,zip(*map(sorted,zip(*['0'*(len(max(b,key=len))-len(x))+x for x in b]))))]


A big chunk of this is for padding the numbers with zeroes.

def collapse(nums):
bins = [bin(n)[2:] for n in nums]
bins = [('0'*(len(max(bins, key = len)) - len(x))) + x for x in bins]
print [int(n, 2) for n in map(''.join, zip(*map(sorted, zip(*bins))))]


This creates an array of the binary string representations, pads it, rotates it 90º clockwise, sorts each row, rotates it back 90º, and then creates integers out of each row.

• 142 bytes, you have some redundant parenthesis. – Mr. Xcoder Jul 30 '17 at 5:39
• @Mr.Xcoder , oh yes that was silly – Daniel Jul 30 '17 at 16:24

# Japt, 9 bytes

m¤ù yñ mÍ


Try it

m¤ù yñ mÍ     :Implicit input of array
m             :Map
¤            :  To binary strings
ù           :Left pad each with spaces to the length of the longest
y         :Transpose
ñ        :Sort each and transpose back
m      :Map
Í     :  To decimal


# Husk, 11 bytes

mḋTmOT0mo↔ḋ


Try it online!