# Interleave strings

Inspiration.* I cannot believe we have not had this challenge before:

Given one or more printable ASCII strings, interleave them by taking one character from each string, cyclically until out of characters. If a string runs out of characters before the others, just skip that one from then on.

Examples

SIMPLE gives SIMPLE

POLLS and EPEES gives PEOPLELESS

LYES and APRONS gives LAYPERSONS

ABCDE and a c and 123 567 gives Aa1B 2Cc3D E567

"\n$?* and ​ (empty string) and ,(.)"  (trailing space) gives ",\(n.$)?"*  (trailing space)

* There are shorter APL solutions.

• Since this is basically just a transpose operation, we've had a few challenges that are very similar, but possibly none that are exactly the same. Dec 8, 2016 at 12:10
• I had this question on my CS HW, does that mean I can close this as a homework question? ;P Dec 8, 2016 at 14:40
• @EriktheOutgolfer Cool! I learned something today.
Apr 16, 2017 at 6:42

# Jelly, 1 byte

Z


Try it online!

The “transpose” built-in will do exactly this to a list of strings.

• I'm curious, what would the code have looked like if you had to pad short strings with spaces?
Dec 8, 2016 at 13:33
• That would be z⁶. z is “transpose left, padding with right”; ⁶ is a space.
– Lynn
Dec 8, 2016 at 13:47
• @Adám Jelly works very well on lists; where do built-ins end and language constructs / design begin? Dec 8, 2016 at 15:44
• @Lynn In Jelly? Anything on the Atoms and Quicks lists are buildt-ins.
Dec 8, 2016 at 16:08
• @Adám ;" (element-wise concatenation) would solve the task without a built-in. Dec 8, 2016 at 17:04

# Python 2, 1018986 69 bytes

I'm hoping I can get this into a lambda somehow, shortening it down by making it recursive. It isn't ideal because you would hope transposing is shorter, unfortunately it isn't (from what I have managed to come up with so far).

f=lambda s:' '*any(s)and''.join(x[:1]for x in s)+f([x[1:]for x in s])


Old solutions:

w=input();o=''
while any(w):
for i in range(len(w)):o+=w[i][:1];w[i]=w[i][1:]
print o

lambda s:''.join(''.join([c,''][c<' ']for c in x)for x in map(None,*[list(y)for y in s]))

w=input();o=''
while any(x>=' 'for x in w):
for i in range(len(w)):o+=w[i][:1];w[i]=w[i][1:]
print o

thanks to mathmandan for making me feel dumb ;) saved me a bunch of bytes! (on an old solution)

• Couldn't you just do while any(w):? Empty strings are falsey in Python. Dec 8, 2016 at 13:30
• @mathmandan You're absolutely right, don't know what I was thinking..
Dec 8, 2016 at 13:33
• No problem :) Your new solution looks great, except I think you need to prepend f=. Dec 8, 2016 at 13:54
• You can take the [] off of the recursive call, leaving f(x[1:] for x in s), that makes it a generator comprehension, which acts the same as a list in this context. Aug 1, 2017 at 17:37

## Perl 6, 34 32 bytes

{[~] flat roundrobin |$_».comb}  {roundrobin(|$_».comb).flat.join}


A lambda that takes an array of strings as argument, and returns a string.

• I would have used @_ instead of $_ Dec 8, 2016 at 19:13 ## CJam, 4 bytes qN/z  Try it online! We can also write an unnamed function for 4 bytes, which expects a list of strings on top of the stack: {zs}  Try it online! • That's one byte a minute! – Adám Dec 8, 2016 at 12:12 # Pyth - 3 bytes Very simple, will add expansion later, on mobile. s.T  Test Suite s Join all the strings together .T Transpose, without chopping off overhang (Q implicit)  • @Daniel I'm in school too :P Dec 8, 2016 at 14:31 • Any plans on adding the explanation? Apr 14, 2017 at 14:14 • @JanDvorak sure doing it now. Apr 16, 2017 at 0:17 # JavaScript (ES6), 52 46 bytes f=([[c,...s],...a])=>s+a?c+f(s+s?[...a,s]:a):c  Takes input as an array of strings and outputs as a single string. ### Test snippet f=([[c,...s],...a])=>s+a?c+f(s+s?[...a,s]:a):c g=a=>console.log("Input:",JSON.stringify(a),"Output:",JSON.stringify(f(a))) g(["SIMPLE"]) g(["POLLS","EPEES"]) g(["LYES","APRONS"]) g(["ABCDE","a c","123 567"]) g(["\"\\n$?*",",(.)\" "]) // Backslash and quote are escaped, but in/output are correct

• f=([[c,...s],...a])=>c?c+f([...a,s]):a+a&&f(a)
– Neil
Dec 8, 2016 at 14:06
• @Neil That's a great approach. I managed to golf 6 bytes off my own :-) Dec 8, 2016 at 15:35

# Haskell, 33 bytes

import Data.List
concat.transpose


Try it on Ideone. Usage:

Prelude Data.List> concat.transpose$["ABCDE","a c","123 567"] "Aa1B 2Cc3D E567"  ### Without using a build-in: (38 34 bytes) f[]=[] f x=[h|h:_<-x]++f[t|_:t<-x]  Try it on Ideone. 4 bytes off thanks to Zgarb! Usage: Prelude> f["ABCDE","a c","123 567"] "Aa1B 2Cc3D E567"  • You can remove all parens in the alternative version. Still won't beat the import though. Dec 8, 2016 at 16:46 • Do you actually need the base case? – xnor Dec 8, 2016 at 17:16 • Never mind, of course the base case is needed. – xnor Dec 8, 2016 at 17:24 • @xnor You also can't move the base case to the end and replace it with f a=a to save a byte because both [] have a different type ... so close. Dec 8, 2016 at 19:46 # C, 114 84 bytes -20 bytes for not calculating the length. i,b;f(char**s){b=1;while(b){i=-1;b=0;while(s[++i]>0)if(*s[i])putchar(*s[i]++),++b;}}  Accepts array of char pointers and requires last item to be a null-pointer (see usage). Ungolfed and usage: i,b;f(char**s){ b=1; while(b){ i=-1; b=0; while(s[++i]>0) if(*s[i]) putchar(*s[i]++),++b; } } int main(){ char*a[]={ // "POLLS","EPEES" // "LYES","APRONS" "ABCDE","a c","123 567" ,0}; f(a); puts(""); }  • Does the usage of printf/sprintf not allowed ? :D you would win quite some bytes. Dec 8, 2016 at 14:18 • @Walfrat Without printing directly I'd need to allocate a string, so how could this save anything. Dec 8, 2016 at 14:22 • it was before your edit where you added the ++b and remove length compute, so yes can't work anymore. Dec 8, 2016 at 14:26 • @Walfrat Yes, but i had a malloc and return before and this was longer than just printing Dec 10, 2016 at 18:50 # PHP, 68 67 bytes for(;$f=!$k=$f;$i++)for(;y|$v=$argv[++$k];$f&=""==$c)echo$c=$v[$i];  Loops over command line arguments. Run with -r. After the inner loop, $f is 1 when all strings are finished, 0 else (bitwise & casts ""==$c to int). Next iteration of the outer loop: copy $f to $k (saves one byte from $k=0) and toggle $f: When all strings are done, $f is now false and the loop gets broken.

• Doesn't work with empty input strings. Take a look at the last testcase Dec 9, 2016 at 11:01
• @aross: fixed. thanks. Dec 9, 2016 at 14:26

## Retina, 13 bytes

Byte count assumes ISO 8859-1 encoding.

O$#.$.%
¶



Try it online!

### Explanation

O$#.$.%


This is based on the standard transposition technique in Retina. We sort (O) all non-linefeed characters (.), by ($#) the number of characters in front of them on the same line ($.%), i.e. their horizontal position.

The second stage then simply removes linefeeds from the input.

# Java, 19+155=174 160

String f(java.util.Queue<String> q){String s,r="";while(!q.isEmpty()){s=q.poll();r+=s.isEmpty()?"":s.charAt(0);if(s.length()>1)q.add(s.substring(1));}return r;}


Ungolfed:

  String f(java.util.Queue<String> q) {
String s, r = "";
while (!q.isEmpty()) {
s = q.poll();
r += s.isEmpty() ? "" : s.charAt(0);
if (s.length() > 1) {
}
}
return r;
}


Output:

SIMPLE

PEOPLELESS

LAYPERSONS

Aa1B 2Cc3D E567

",(n.$)?"* ​ First modification: merged string declaration to save some bytes. Removed import, it was used by the main() method (not shown here) that also needed LinkedList. It is fewer bytes to referece Queue directly. • initialize string s with string r can save few more Dec 9, 2016 at 11:10 • I know it's been almost a year ago, but you can golf a few bytes: String f(java.util.Queue<String>q){String s,r="";for(;!q.isEmpty();r+=s.isEmpty()?"":s.charAt(0))if((s=q.poll()).length()>1)q.add(s.substring(1));return r;} Sep 6, 2017 at 8:55 # PHP, 77 bytes ## Golfed function($a){for($d=1;$d!=$s;$i++){$d=$s;foreach($a as$v)$s.=$v[$i];}echo$s;}


Anonymous function that takes an array of strings.

I'm sure this could be golfed more, but it's early. On each iteration, we grab the i-th letter from each given string and append it to our final string, one at a time. PHP just throws warnings if we access bits of strings that don't exist, so that's fine. We only stop when no changes have been made after looping through all the strings once.

I feel like the usage of $d can be golfed more, but it's early. :P • How exactly do you put an array of strings in a single argument? Dec 8, 2016 at 13:50 • @Titus. Y'know, I never really thought about it. I just kinda assumed you could. Dec 8, 2016 at 13:58 # Actually, 7 6 bytes Golfing suggestions welcome! Try it online! Edit: -1 byte thanks to Teal pelican. a Z♂ΣΣ  Ungolfing  Implicit input each string. a Invert the stack so that the strings are in the correct order. <space> Get the number of items on the stack, len(stack). Z Zip all len(stack) strings into one, transposing them. ♂Σ sum() every transposed list of chars into strings. Σ sum() again to join the strings together.  • Can you not remove the # to make it 6 bytes? Dec 8, 2016 at 15:44 • @Tealpelican Welp, now I'm going to have to dig through all of my old Actually answers and see if I can't change Z♂#Σ to Z♂Σ in all of them. Thanks for the tip :D Dec 8, 2016 at 15:49 • First time looking into the language, it looks so much fun! Glad I could help :)) Dec 8, 2016 at 15:54 ## JavaScript (ES6), 46 bytes f=([[c,...s],...a])=>c?c+f([...a,s]):a+a&&f(a) <textarea oninput=o.textContent=f(this.value.split\n)></textarea><div id=o> # Python 2, 58 bytes lambda*m:''.join(map(lambda*r:''.join(filter(None,r)),*m))  Try it online! • Can't you remove the space in lambda *m? Apr 16, 2017 at 6:50 • I just did that! Thank you! Apr 16, 2017 at 6:56 # J, 13 bytes ({~/:)&;#\&.>  Try it online! Based on the inspiration for this question. Another way to do it takes 27 bytes but operates using transpose. Most of the bytes are to handle the automatically added zeroes from padding. [:u:0<:@-.~[:,@|:(1+3&u:)&>  ## Explanation ({~/:)&;#\&.> Input: list of boxed strings S &.> For each boxed string x in S #\ Get the length of each prefix from shortest to longest This forms the range [1, 2, ..., len(x)] Rebox it ( ) Operate on S and the prefix lengths &; Raze both /: Grade up the raze of the prefix lengths {~ Index into the raze of S using the grades Return  • J's prohibiting mixed arrays really hurts you here. Try it in APL. – Adám Dec 8, 2016 at 15:11 # Bash + GNU utilities, 55  eval paste sed "s/.*/<(fold -1<<<'&')/g"|tr -d \\n\\t  I/O via STDIN (line-separated) and STDOUT. The sed formats each line to a bash process substitution. These are then evaled into paste to do the actual interleaving. tr then removes unnecessary newlines and tabs. Ideone. # PHP, 63 bytes Note: uses IBM-850 encoding for(;$s^=1;$i++)for(;n|$w=$argv[++$$i];s&=x<~■)echox=w[i];  Run like this: php -r 'for(;s^=1;i++)for(;n|w=argv[++$$i];$s&=$x<~■)echo$x=$w[$i];' "\"\n\$?*" "" ",(.)\" " 2>/dev/null;echo > ",\(n.$)?"*


# Explanation

for(                       # Iterate over string index.
;
$s ^= 1; # Continue until$s (stop iterating) is 1.
# Flip $s so each iteration starts with$s
# being 1.
$i++ # Increment string index. ) for( ; "n" |$w=$argv[++$$i]; # Iterate over all input strings. OR with "n" # to allow for empty strings. s &= x<~■ # If last character printed was greater than # \x0 (all printable chars), set s to 0, # causing the loop to continue. ) echo x = w[i]; # Print char i of current string.  • IBM-850?! Is that a natural encoding for PHP? – Adám Dec 9, 2016 at 11:48 • @Adám what do you mean by "natural"? PHP treats bytes in the range 128-255 as text, which is therefore interpreted as a constant. If the constant is undefined, it will be interpreted as a string. It's so I can do ~■ (negated binary 254) instead of "\x1" (binary 1). Dec 9, 2016 at 13:02 • I see. It isn't that you actually need that codepage, you just need a 254 byte. – Adám Dec 9, 2016 at 14:13 • @Adám yes, the codepage just makes it a printable char which is a little less annoying. Dec 9, 2016 at 14:27 • Great use of $$! Dec 9, 2016 at 14:29 # Python 3, 75 Bytes I know the other Python one is shorter, but this is the first time I've used map ever in my life so I'm pretty proud of it lambda n:''.join(i[k]for k in range(max(map(len,n)))for i in n if len(i)>k)  ## Python 2, 128 96 I was hoping not to have to use itertools a=lambda a:"".join([i for i in reduce(lambda: b,c:b+c, map(None,*map(lambda m:list(m),a)) if i])  Ungolfed  a=lambda a: #Start a lambda taking in a "".join( #Join the result together with empty string [i for i in reduce( #For every item, apply the function and 'keep' lambda: b,c:b+c, #Add lists from... map(None,*map( #None = Identity function, over a map of... lambda m:list(m), a) #list made for mthe strings m ) if i #truthy values only (otherwise the outer map will padd with None. ])  • Would appreciate feedback/advice on improving this. Dec 9, 2016 at 16:51 • Looks like this answer is invalid due to some syntax errors. Here's a fixed version, and here's one possible way to golf it (58 bytes). Jan 29 at 18:11 • @DLosc thanks! Not sure how best to incorporate those right now, but I appreciate it. Jan 29 at 18:24 # C, 75 71 bytes Only limitation is the output length. Currently it's 99, but can be easily stretched to 999 (+1 byte). i;main(a,b)char**b;{a--;for(;i<99;i++)*b[i%a+1]&&putchar(*b[i%a+1]++);}  Ungolfed: i; main( a, b ) char **b; { a--; for( ; i < 99; i++ ) *b[i % a + 1] && putchar( *b[i % a + 1]++ ); }  # Oracle SQL, 195 bytes  select listagg(b,'') within group(order by l,o) from(select substr(a,level,1) b,level l,o from i start with length(a)>0 connect by prior a=a and level<=length(a) and prior sys_guid() is not null)  Takes its input from a table named i with columns a (containing the string) and o (order of the string):  create table i (a varchar2(4000), a integer)  Explanation: We're exploiting CONNECT BY to break up the strings into each of the characters making them up. PRIOR SYS_GUID() being NOT NULL ensures we don't end up stuck in a loop. We then concatenate the single characters with LISTAGG but we shuffle them around with an ORDER BY clause, ordering them first by their position in the original string and only then by the string they came from. Not as short as the other answers but SQL isn't really meant as a string manipulation language :) # R, 73 bytes for(i in 1:max(nchar(s<-scan(,""))))for(j in seq(s))cat(substr(s[j],i,i))  Try it online! Explanation: very simple (but verbose), just loop through printing ith character of the jth string. Fortunately, substr returns an empty string if given an out-of-range input. # Jq 1.5, 49 bytes map(explode)|transpose|map(map(values)[])|implode  Explanation  # example input: ["LYES","APRONS"] map(explode) # make list of ordinals [[76,89,69,83],[65,80,82,79,78,83]] | transpose # zip lists [[76,65],[89,80],[69,82],[83,79],[null,78],[null,83]] | map(map(values)[]) # rm nulls and flatten [76,65,89,80,69,82,83,79,78,83] | implode # convert back to string "LAYPERSONS"  Sample Run $ paste input <(jq -Mrc 'map(explode)|transpose|map(map(values)[])|implode' input)
["SIMPLE"]                  SIMPLE
["POLLS","EPEES"]           PEOPLELESS
["LYES","APRONS"]           LAYPERSONS
["ABCDE", "a c", "123 567"] Aa1B 2Cc3D E567
["\"\\n$?*", "", ",(.)\" "] ",\(n.$)?"*

$echo -n 'map(explode)|transpose|map(map(values)[])|implode' | wc -c 49  Try it online # Perl 5, + -0n 24 bytes 1while s/^./!print$&/gem


Try it online!

-0n slurps the input into $_ and repeatedly replaces the first char of each line with the result of negating the print of each match (which is the empty string since print returns 1 by default) • I thought I was good in Perl, but this baffled me. So -0 on input that doesn't contail a NUL is equivalent to slurping all. And then ^. with /g prints each beginning of line, while replacing it with nothing. Jan 29 at 9:36 • @Daniel Yeah that's about it! Needing to negate the print is a little annoying... Having looked at this again, I can save a byte using 1while s/.... so thanks! Jan 29 at 16:10 # Factor, 22 bytes [ round-robin ""like ]  Try it online! ## Python, 112 bytes i=len(x)if len(x)>len(y) else len(y) h=0 a="" while h<i: if h<len(x) a+=x[h] if h<len(y): a += y[h] h+=1 print a  • Your formatting is really messed up.. where do you even get x and y from? – Kade Dec 8, 2016 at 13:35 # Perl 5, 53 bytes $i=0,map{push@{$a[$i++]},$_}/./g for<>;print@$_ for@a


Try it online!

Method

Creates a two dimensional array where the number of rows is equal to the length of the longest string and the maximum number of columns is equal to the number of strings. Then output each row of the array without spacing.

# TXR Lisp, 20 bytes

(opip weave cat-str)


Run:

1> (opip weave cat-str)
#<intrinsic fun: 0 param + variadic>
2> [*1 "LYES" "APRONS"]
"LAYPERSONS"
3> [*1 "ABCDE" "a c" "" "123 567"]
"Aa1B 2Cc3D E567"
4> [*1 "\"\\n$?*" "" ",(.) "] "\",\\(n.$)? *"


The weave function is lazy, so it returns a list, which is why we have to force the result to a string. Being lazy, it can weave infinite sequences. For instance, we can weave the even and odd natural numbers, which are themselves infinite lazy lists:

5> (take 20 (weave (range 2 : 2) (range 1 : 2)))
(2 1 4 3 6 5 8 7 10 9 12 11 14 13 16 15 18 17 20 19)


# K (oK), 35 29 bytes

Solution:

{c$r@&~^r:,/+(i$x)[;!#,/x]}


Try it online!

Example:

> {c$r@&~^r:,/+(i$x)[;!#,/x]}("ABCDE";"a c";"123 567")
"Aa1B 2Cc3D E567"
> {c$r@&~^r:,/+(i$x)[;!#,/x]}("\n$?*";"";",(.)\" ") "\n,$(?.*)\" "
> {c$r@&~^r:,/+(i$x)[;!#,/x]}("POLLS";"EPEES")
"PEOPLELESS"


Explanation:

Use 2nd-level indexing to pull out indices from 0 to max (length of flattened list) across all input lists. Any indexing beyond the bound of the sub-list will return a null. Flip (rotates 90), flatten, and then pull out the non-null results.

Notes:

• I cast to integer (i\$`) so that we get useful nulls, as space () is considered null for a char list which means you cant tell nulls from valid spaces.
• Also I couldnt get the TIO to work with input (worked fine in the oK repl) so the TIO link includes the "ABCDE"... example.