# Numbers divisible by the sum and product of their digits

Take a positive integer X. This number is part of the sequence we are interested in if the sum of all digits of X is a divisor of X, and if the product of all digits of X is a divisor of X.

For example, 135 is such a number because 1 + 3 + 5 = 9 which divides 135 = 9 * 15 and 1 * 3 * 5 = 15 which also divides 135.

This is sequence A038186 in the OEIS.

Your task: given an integer N, output the Nth positive integer with such properties.

### Inputs and outputs

• Numbers may be 0-indexed or 1-indexed; please indicate which one your answer use.

• The input may be taken through STDIN, as a function argument, or anything similar.

• The output may be printed to STDOUT, returned from a function, or anything similar.

### Test cases

The test cases below are 1-indexed.

Input        Output

1            1
5            5
10           12
20           312
42           6912
50           11313


### Scoring

This is , so the shortest answer in bytes wins.

• would it be ok to print out each number as you calculate it up towards n=infinity?
– Blue
Nov 29, 2016 at 9:36
• @BlueEyedBeast No, you have to take an input and return the corresponding number. Nov 29, 2016 at 9:37
• When checking 10, is the product of its digits 0 or 1? Nov 29, 2016 at 14:06
• @george its product is 0. Nov 29, 2016 at 14:20
• Can I arbitrarily limit the range of the input if the upper limit of the range wouldn't be computed before the heat death of the universe anyways?
– cat
Dec 1, 2016 at 13:44

# 05AB1E, 13 12 bytes

Thanks to Emigna for saving a byte!

µNNSONSP‚ÖP½


Explanation:

µ          ½   # Get the nth number for which the following holds:
NSO          #   The sum of digits of the current number
NSP       #   And the products of digits of the current number
N      ‚ÖP    #   Divides the current number
# If the nth number has been reached, quit and implicitly print N


Uses the CP-1252 encoding. Try it online!

• µNNSONSP‚ÖP½ works as well doesn't it? Nov 29, 2016 at 10:58
• @Emigna Nice one! Thanks :) Nov 29, 2016 at 12:02

## Pyke, 14 bytes (non-competitive) (1-indexed)

~1IY'sB]im%X)@


Try it here!

My god what a lot of new features.

~1             -   infinite list of natural numbers
IY'sB]im%X)  -  filter(^, V) - remove if any truthiness
Y           -      digits(i)
'sB]       -     [sum(^), product(^)]
im%    -    map(^, %i)
X   -   splat(^)
@ - ^[input]


Of which are non-competitive

• a bugfix in I where it would only check if the first item on the stack was truthy
• digits - return a list of digits in the number
• @ used to get the nth item of an infinite list

Of which were being used for the first time:

• all of the above
• infinite lists

Remove the last 2 bytes to get all of these numbers.

# Jelly, 13 bytes

DµP;SðḍȦ
1Ç#Ṫ


1-based.
TryItOnline!

### How?

DµP;SðḍȦ - Link 1, test a number
D        - convert to a decimal list
;     - concatenate the
P      -     product, and the
S    -     sum
ḍ  - divides n?
Ȧ - all (i.e. both)

1Ç#Ṫ - Main link, get nth entry, 1-based: n
1 #  - find the first n matches starting at 1 of
Ṫ - tail (the ultimate result)


# C#, 118 bytes

n=>{int x=0,c=0;for(;;){int s=0,p=1,i=++x;while(i>0){s+=i%10;p*=i%10;i/=10;}if((c+=p>0&&x%s+x%p<1?1:0)==n)return x;}};


Full program with ungolfed function and test cases:

using System;

public class Program
{
public static void Main()
{
// x - output number
// c - counter
// s - sum
// p - product
// i - iterator
Func<int,int>f= n=>
{
int x=0, c=0;
for ( ; ; )
{
int s=0, p=1, i=++x;
while (i > 0)
{
s += i%10;
p *= i%10;
i /= 10;
}
if ( (c += p> 0&& x%s+x%p<1 ? 1 : 0) == n)
return x;
}
};

// tests:
Console.WriteLine(f(1));  //1
Console.WriteLine(f(5));  //5
Console.WriteLine(f(10)); //12
Console.WriteLine(f(20)); //312
Console.WriteLine(f(42)); //6912
Console.WriteLine(f(50)); //11313
}
}

• for(int x=0,c=0;;) saves you 1 byte. Nov 30, 2016 at 14:17

## Jellyfish, 45 bytes

p
\Ai
\&
>(&]&|0
<*&d
&~bN
10
( )/+
/*


Try it online!

### Explanation

This is by far the most elaborate (and also the longest) program I've written in Jellyfish so far. I have no idea whether I'll be able to break this down in an understandable manner, but I guess I'll have to try.

Jellyfish provides a fairly general iteration operator, \, which helps a lot with "finding the Nth something". One of its semantics is "iterate a function on a value until a separate test function gives something truthy" (in fact, the test function receives both the current and the last element, but we'll only make it look at the current element). We can use this to implement a "next valid number" function. Another overload of \ is "iterate a function on a starting value N times". We can use our previous function and iterate it on 0 N times, where N is the input. All of that is set up fairly concisely with this part of the code:

p
\Ai
\&
>     0


(The reasons why 0, the actual input to the resulting function, is over there are a bit complicated and I won't go into them here.)

The issue with all of this is, that we won't be passing the current value to the test function manually. The \ operator will do this for us. So we now have construct a single unary function (via compositions, hooks, forks and currying) which takes a number and tells us whether it's a valid number (i.e. one which is divided by its digit sum and digit product). This is fairly non-trivial when you can't refer to the argument. Ever. It's this beauty:

 (&]&|
<*&d
&~bN
10
( )/+
/*


The ( is a unary hook, which means that it calls the function below (f) on its input (the current value x), and then passes both of them to the test function to the right (g), that is it computes g(f(x), x).

In our case, f(x) is another composite function which obtains a pair with the digit product and digit sum of x. That means g will be a function that has all three values to check if x is valid.

We'll start by looking at how f computes the digit sum and digit product. This is f:

 &~b
10
( )/*
/+


& is also composition (but the other way round). ~ is currying so 10~b gives function that computes the decimal digits of a number, and since we're passing that to & from the right, that's the first thing that will happen to the input x. The remainder uses this list of digits to compute their sum and product.

To compute a sum, we can fold addition over it, which is /+. Likewise, to compute the product we fold multiplication over it with /*. To combine both of these results into a pair, we use a pair of hooks, ( and ). The structure of this is:

()g
f


(Where f and g are product and sum, respectively.) Let's try to figure out why this gives us a pair of f(x) and g(x). Note that the right hook ) only has one argument. In this case, the other argument is implied to be ; which wraps its arguments in a pair. Furthermore, hooks can also be used as binary functions (which will be the case here) in which case they simply apply the inner function only to one argument. So really ) on a single function g gives a function that computes [x, g(y)]. Using this in a left hook, together with f, we obtain [f(x), g(y)]. This, in turn is used in a unary context, which mean that it's actually called with x == y and so we end up with [f(x), g(x)] as required. Phew.

That leaves only one thing, which was our earlier test function g. Recall that it will be called as g([p, s], x) where x is still the current input value, p is its digit product and s is its digit sum. This is g:

  &]&|
<*&d
N


To test divisibility, we'll obviously use modulo, which is | in Jellyfish. Somewhat unusually, it take its right-hand operand modulo its left-hand operand, which means that the arguments to g are already in the right order (arithmetic functions like this automatically thread over lists, so this will compute the two separate moduli for free). Our number is divisible by both the product and sum, if the result is a pair of zeros. To check whether that's the case, we treat the pair as a list of base-2 digits (d). The result of this is zero, only when both elements of the pair are zero, so we can negate the result of this (N) to obtain a truthy value for whether both values divide the input. Note that |, d and N are simply all composed together with a pair of &s.

Unfortunately, that's not the full story. What if the digit product is zero? Division and modulo by zero both return zero in Jellyfish. While this may seem like a somewhat odd convention, it actually turns out to be somewhat useful (because we don't need to check for zero before doing the modulo). However it also means we can get a false positive, if the digit sum does divide the input, but the digit product is zero (e.g. input 10).

We can fix this by multiplying our divisibility result by the digit product (so if the digit product is zero it will turn our truthy value into a zero as well). It turns out to be simpler to multiply the divisibility result with the pair of product and sum, and extract the result from the product afterwards.

To multiply the result with the pair, we kinda need to get back at an earlier value (the pair). This is done with a fork (]). Forks are kinda like hooks on steroids. If you give them two functions f and g, they represent a binary function which computes f(a, g(a, b)). In our case, a is the product/sum pair, b is the current input value, g is our divisibility test, and f is the multiplication. So all of this computes [p, s] * ([p, s] % x == [0, 0]).

All that's left now is to extract the first value of this, which is the final value of the test function used in the iterator. This is as simple as composing (&) the fork with the head function <, which returns the first value of a list.

• As the creator of Jellyfish, I approve this message. (Really, I would lose patience halfway through solving this challenge in Jellyfish.) Nov 29, 2016 at 21:27

# Perl 6, 44 bytes (0-indexed)

{grep({$_%%(.comb.sum&[*] .comb)},1..*)[$_]}


Explanation:

{                                          }  # A function, with an argument n ($_) grep( ,1..*) # Filter the infinite list {$_                       }             # Check that the function's argument
%%(                   )              # is divisible by
&                        # both:
.comb.sum                         # - the sum of the digits
[*] .comb               # - the product of the digits
[$_] # Get the n-th value  Infinite lists ftw! • @joshua thanks, but those parens are necessary for the precedence. Also, using a weird symbol instead of * would mean more bytes. – Ven Nov 29, 2016 at 15:49 • Dangit I forgot to check if it had a Perl 6 answer before posting. Also I would (did) handle Failures by using //0 in the grep block. Nov 30, 2016 at 2:29 • @BradGilbertb2gills Don't hesitate to post a better version! I didn't use //0 because it's usually accepted in codegolf to print to stderr. – Ven Nov 30, 2016 at 8:08 • It was literally exactly the same except for //0 Dec 1, 2016 at 2:05 # Actually, 20 bytes Naive implementation of the sequence definition. Golfing suggestions welcome! Try it online! u;;$♂≈;Σ(%@π(%|Y╓N


Ungolfing

         Implicit input n.
u        Increment n, so that we don't accidentally include 0 in the sequence.
...╓   Starting with x=0, return the first n+1 values of x where f(x) is truthy.
;;       Duplicate x twice.
$♂≈ str(x) and convert each char (each digit) into an int. Call this digit_list. ; Duplicate digit_list. Σ Get sum(digit_list). (% Get x % sum(digit_list), which returns 0 if sum is a divisor of x. @ Swap the other duplicate of digit_list to TOS. π Get prod(digit_list). (% Get x % prod(digit_list), which returns 0 if prod is a divisor of x. | Get x % sum(digit_list) OR x % prod(digit_list). Y Logical negate, which only returns 1 if both are divisors, else 0. N Return the last value in the list of x where f(x) is truthy, that is, the nth value of the sequence.  ## JavaScript (ES6), 72 bytes k=>eval("for(n=0;(E=o=>n%eval([...n+''].join(o))!=0)+|E*||--k;)++n")  ### Demo It tends to be slow for higher values, so I'm limiting it to 20 here. let f = k=>eval("for(n=0;(E=o=>n%eval([...n+''].join(o))!=0)+|E*||--k;)++n") console.log(f(1)); // 1 console.log(f(5)); // 5 console.log(f(10)); // 12 console.log(f(20)); // 312 ## R, 132 115 bytes New version thanks to @Billywob nice comments ! n=scan();b=i=0;while(i<n){b=b+1;d=strtoi(el(strsplit(c(b,""),"")));if(na.omit(c(!b%%sum(d)&!b%%prod(d),0)))i=i+1};b  Ungolfed : n=scan() b=i=0 while(i<n) b=b+1; d=strtoi(el(strsplit(c(b,""),""))) #Splitting the number into its digits if(na.omit(c(!b%%sum(d)&!b%%prod(d),0))) i=i+1 b  Since R behave strangley with NAs, I had to add the whole ifelse(is.na(...)) part! Or use na.omit(...) • n=scan();b=i=0;while(i<n){b=b+1;d=strtoi(el(strsplit(c(b,""),"")));if(!b%%sum(d)&ifelse(is.na((p=!b%%prod(d))),F,p))i=i+1};b saves a few bytes by: el(...) instead of [[1]], using c(b,"") instead of paste(b),negating the logical expressions by ! instead of ==0 and skipping the curly brackets on the if statement. My guess is that there should be an easier way of handling the NA issue but couldn't figure out something clever. Nov 29, 2016 at 16:31 • Turns out we can circumvent it by appending a 0 to the expression evaluated in the if statement. However, this returns a warning when the product isn't equal to 0. n=scan();b=i=0;while(i<n){b=b+1;d=strtoi(el(strsplit(c(b,""),"")));if(na.omit(c(!b%%sum(d)&!b%%prod(d),0)))i=i+1};b Nov 29, 2016 at 16:38 • @Billywob Thanks a lot ! i didn't know about el(...) ! Nov 30, 2016 at 15:01 # Brachylog, 22 bytes :1yt #>=.@e+:I*.@e*:J*  Try it online! ### Explanation :1y Evaluate the first N valid outputs to the predicate below given the main input as input t The output is the last one #>=. Output is a strictly positive integer @e+ The sum of its digits… :I*. …multiplied by an integer I results in the Output @e* The product of its digits… :J* …multiplied by an integer J results in the Output  # JavaScript (ES6), 78 n=>eval("for(i=0;n;!p|i%s|i%p||n--)[...++i+''].map(d=>(s-=d,p*=d),s=0,p=1);i")  Less golfed n=>{ for(i=0; n; !p|i%s|i%p || n--) s=0, p=1, [...++i+''].map(d=>(s-=d, p*=d)); return i }  # Pyth, 18 bytes e.f!.xs%LZsM*FBsM  Try it online: Demonstration ### Explanation: e.f!.xs%LZsM*FBsMZZQ1 implicit variables at the end e print the last number of the .f Q1 first Q (input) numbers Z >= 1, which satisfy: Z convert Z to a string, e.g. "124" sM convert each digits back to a number, e.g. [1, 2, 4] *FB bifurcate with product, e.g. [[1, 2, 4], 8] sM take the sum of each, e.g. [7, 8] %LZ compute the modulo of Z with each number, e.g. [5, 4] s and add both numbers, e.g. 9 .x Z if an exception occurs (mod 0), use number Z instead ! test, if this number is zero  # Haskell, 948572 71 bytes ([n|n<-[0..],(==)=<<map(gcd n)$[product,sum]<*>[read.pure<$>show n]]!!)  1-indexed. Thanks to @Zgarb for saving 13 bytes! Thanks to @nimi for saving a byte! • (==)=<<map(gcd n)$[sum k,product k] should save some bytes. Nov 29, 2016 at 19:12
• And while we're doing that, [sum k,product k] can be map($read.pure<$>show n)[sum,product]. Nov 29, 2016 at 19:17
• One more byte: ([n|n<-[0..],(==)=<<map(gcd n)$[product,sum]<*>[read.pure<$>show n]]!!)
– nimi
Nov 29, 2016 at 21:18

# APL (Dyalog Unicode), 33 bytes

I followed an idea of @ngn when it comes to wrapping the function in some sort of a ⍣-based operation.

{1+⍣{0=+/((1∘⊥,×/)⍎¨⍕⍺)|⍺ ⍺}⍣⍵⊢0}


Explanation:

{1+⍣{0=+/((1∘⊥,×/)⍎¨⍕⍺)|⍺ ⍺}⍣⍵⊢0}
{1+⍣                        ⍣⍵⊢0}  ⍝ Execute the inner dfn until it returns one ⍵ times
⍝ and yield the last number it processed.
{0=+/((1∘⊥,×/)⍎¨⍕⍺)|⍺ ⍺}       ⍝ 1 if ⍺ is divisible by sum and product of its digits.
⍎¨⍕⍺             ⍝ digits of ⍺
,                    ⍝ a vector of...
×/                  ⍝ product of digits
1∘⊥                     ⍝ sum of digits
|⍺ ⍺        ⍝ each modulo ⍺
0=+/                          ⍝ both divisible?


Try it online!

• 27
Jan 18, 2022 at 7:10
• I'm fairly certain this 25er works.
Jan 18, 2022 at 8:32
• Could have saved 2 bites({}) by using ⎕ to get input instead of making it a dfn Jan 18, 2022 at 10:08

# Vyxal, 9 bytes

λ₍∑ΠḊA;ȯt


Try it Online!

Apparently there's a 10 byte 0-indexed version.

-3 bytes from Lyxal.

• May 7, 2021 at 5:06

# MATL, 21 bytes

@tFYAtswph\~?@]NG<]&


Long and inefficient...

Try it online!

### How it works

        % Do...while
@      %   Push current iteration index (1-based)
tFYA   %   Duplicate. Convert number to its digits
ts     %   Duplicate. Sum of digits
wp     %   Swap. Product of digits
h\     %   Concatenate. Modulo. This gives a length-2 array
~?     %   If the two values are zero: we found a number in the sequence
@    %     Push that number
]      %   End if
NG<    %   True if number of elements in stack is less than input
]        % End do...while. If top of the stack is true: next iteration. Else: exit
&        % Specify only one input (top of stack) for implicit display


# Python 2, 122 110 Bytes

def a(m,i=1,k=1):n=map(int,i);p=reduce(lambda x,y:x*y,n);k+=p and 1>i%sum(n)+i%p;return(k>m)*i or a(m,i+1,k)


1 indexed, you need to use a Python interpreter with a quite high recursion limit.

## Python3, 134 80 Bytes

New version thanks to Flp.Tkc

t=input();h=k=0;p=int
def g(x,q=0,w=1):
for i in x:X=p(x);I=p(i);q+=I;w*=I
return w!=0and X%q+X%w<1
while h<p(t):k+=1;h+=g(str(k))


New code, I remembered a golfing way to do the factorial

f,t=lambda x:0**x or x*f(x-1),0
for i in str(f(int(input()))):t+=int(i)
print(t)


The code itself isn't very golf-like, more like brute force golf

def g(x):
q=0;w=1;X=int(x)
for i in x:I=int(i);q+=I;w*=I
return (w!=0+ X%q==0and X%w==0)
t=input();h=k=0
while h<int(t):
k+=1
if g(str(k))is True:h+=1


g(x) is a function that returns True if x fits the criteria.

• In the future, use <1 instead of ==0. You don't need the is True, the point of an if statement is to check whether the condition is true anyway. You can use Python 2's backtick shortcut for str/repr to shave some bytes. There's also a lot of unneeded whitespace here. Nov 29, 2016 at 18:53
• Also, you can use booleans as integer values: h+=g(str(k)) adds 1 if True, 0 if False. Nov 29, 2016 at 19:58
• @Flp.Tkc can you explain the backtick trick. I've tried to use it and it threw a syntax error Nov 29, 2016 at 21:38
• Doing (backtick)x(backtick) in Python 2 is the same is repr(x) or str(x) in Python 3 :) Nov 29, 2016 at 21:49
• @Flp.Tkc that only works in pre Python 3. It was removed in 3.0 Nov 29, 2016 at 21:50

# x86-16 machine code, 52 bytes

00000000: 33db 4351 8bc3 bf0a 0033 f6b1 0133 d2f7  3.CQ.....3...3..
00000010: f703 f291 f7e2 9142 e314 85c0 75ef 8bc3  .......B....u...
00000020: 33d2 f7f6 8bc3 85d2 7504 f7f1 85d2 5975  3.......u.....Yu
00000030: d1e2 cfc3                                ....


Listing:

33 DB       XOR  BX, BX         ; X = 0
NUM_LOOP:
43          INC  BX             ; increment X
51          PUSH CX             ; save loop counter (N)
8B C3       MOV  AX, BX         ; AX = current X
START_N:
BF 000A     MOV  DI, 10         ; DI = decimal divisor of 10
33 F6       XOR  SI, SI         ; SI = sum of digits
B1 01       MOV  CL, 1          ; CX = product of digits
SPLIT_DIGITS:
33 D2       XOR  DX, DX         ; clear high word of dividend
F7 F7       DIV  DI             ; AX = quotient, DX = remainder
03 F2       ADD  SI, DX         ; SI = SI + digit
91          XCHG AX, CX         ; AX = running product, CX = quotient
F7 E2       MUL  DX             ; AX = AX * digit
91          XCHG AX, CX         ; CX = running product, AX = quotient
42          INC  DX             ; ZF = NZ (hacky)
E3 14       JCXZ END_N          ; if digit is a 0, end with Falsey
85 C0       TEST AX, AX         ; is quotient 0?
75 EF       JNZ  SPLIT_DIGITS   ; loop until it is
8B C3       MOV  AX, BX         ; AX = current X
33 D2       XOR  DX, DX         ; clear high word of dividend
F7 F6       DIV  SI             ; divide X by sum
8B C3       MOV  AX, BX         ; AX = current X
85 D2       TEST DX, DX         ; if sum remainder is 0 then Truthy (ZF = ZR)
75 04       JNZ  END_N          ; if not, end with Falsey (ZF = NZ)
F7 F1       DIV  CX             ; divide X by product
85 D2       TEST DX, DX         ; if product remainder is 0 then Truthy (ZF = ZR)
END_N:
59          POP  CX             ; restore loop counter
75 D1       JNZ  NUM_LOOP       ; if falsey, keep looping and don't decrement counter
E2 CF       LOOP NUM_LOOP       ; otherwise decrement counter and loop


Callable function. Input N in CX, Output Nth positive integer in BX.

N of 50 is about 4 seconds on an IBM PC 5150:

## JavaScript (ES6), 70 bytes

k=(b,n=1,f=c=>n%eval([...n+''].join(c))!=0)=>f+|f*||--b?k(b,n+1):n


This turned out quite a bit like @Arnauld's answer, but recursion is apparently 2 bytes shorter. Works in Chrome, though it's very slow on inputs greater than 30 or so (50 takes 6 seconds).

# Wonder, 33 bytes

@:^#0(!>@!(| %#0sum#0)%#0prod#0)N


Zero-indexed. Usage:

(@:^#0(!>@!(| %#0sum#0)%#0prod#0)N)9


# Explanation

@
iget #0
(fltr@
not (or % #0 sum #0) % #0 prod #0
) N


Basically gets an infinite list of numbers divisible by its digital sum and product by filtering an infinite list of whole numbers through a predicate. Then the nth item is simply picked out of the list.

# Julia, 81 bytes

n->(i=c=1;while c<n d=digits(i+=1);all(d.>0)&&i%sum(d)==i%prod(d)<1&&(c+=1)end;i)


This is an anonymous function that accepts an integer and returns an integer. To call it, give it a name. The approach is the obvious one: check every number until we've encountered n terms of the sequence. The all check is necessary to ensure we don't get a DivisionError from % when the product of the digits is 0.

Ungolfed:

function f(n)
i = c = 1
while c < n
d = digits(i += 1)
all(d .> 0) && i % sum(d) == i % prod(d) < 1 && (c += 1)
end
return i
end


Try it online! (includes all test cases)

• You can save two bytes by assigning prod(d) to p or something and then replacing the all(d.>0) with p>0. And you can save another by moving the i%sum(d) onto the other side of the 1 i.e. p<1>i%sum(d). Nov 30, 2016 at 11:16

# C89, 381226195170 169 bytes

1-indexed (same exact answers as in the challenge).

Assumes 4-byte (32 bit) int (most modern architectures).

I genuinely believe this can't go any shorter.

x,c,*b,m,t,i,a;g(n){for(b=malloc(0);c<n;b[c-1]=x++,t=1){char s[9];for(i=m=0;i<sprintf(s,"%d",x);m+=a,t*=a)a=s[i++]-48;b=m*t?x%m+x%t?b:realloc(b,4*++c):b;}return b[c-1];}


Function int g (int) leaks memory and accesses uninitialised memory once per call but doesn't segfault and returns the right number.

Full program that takes input in unary (./prog $(seq 1 10) for 10) with ungolfed (kinda): x, c, * b, m, t, i, a; g(n) { for (b = malloc(0); c < n; b[c - 1] = x++, t = 1) { char s[9]; i = m = 0; for (; i < sprintf(s, "%d", x); m += a, t *= a) a = s[i++] - 48; b = m * t ? x % m + x % t ? b : realloc(b, 4 * ++c) : b; } return b[c - 1]; } main (j) { printf("%d\n", g(--j)); }  ### Old answer: ### C99, 381 bytes #include <stdio.h> #include <inttypes.h> #include <string.h> #include <stdlib.h> #define U uint64_t #define S size_t S f(S n){U x=0;S c=1,l;U*b=malloc(sizeof(U));while(c<=n){char s[21];snprintf(s,20,"%"PRIu64,x);U m=0,t=1;l=strnlen(s,21);for(S i=0;i<l;i++){U a=(U)s[i]-48;m+=a,t*=a;}if(m*t?(!(x%m))&&(!(x%t)):0){b=realloc(b,sizeof(U)*++c);b[c-1]=x;}++x;}U o=b[n];free(b);return o;}  This can probably be golfed more. Full program: #include <stdio.h> #include <limits.h> #include <stdint.h> #include <inttypes.h> #include <stdbool.h> #include <string.h> #include <stdlib.h> bool qualifies (const uint64_t); size_t f (const size_t); int main(const int argc, const char* const * const argv) { (void) argc; size_t arg = strtoull(argv[1], NULL, 10); uint64_t a = f(arg); printf("a: %" PRIu64 "\n", a); return 0; } bool qualifies (const uint64_t num) { char s[21]; snprintf(s, 20, "%" PRIu64 "", num); uint64_t sum = 0, mult = 1; size_t len = strnlen(s, 400); for (size_t i = 0; i < len; i++) { uint64_t a = (uint64_t) s[i] - 48; sum += a, mult *= a; } //printf("sum: %" PRIu64 "\nmult: %" PRIu64 "\n", sum, mult); return sum * mult ? (! (num % sum)) && (! (num % mult)) : false; } size_t f (const size_t n) { uint64_t x = 0; size_t s_len = 1; uint64_t* nums = malloc(sizeof (uint64_t) * s_len); while (s_len <= n) { if (qualifies(x)) { ++s_len; //printf("len: %zu\n", s_len); nums = realloc(nums, sizeof (uint64_t) * s_len); nums[s_len - 1] = x; } ++x; } uint64_t o = nums[n]; free(nums); return o; }  • tio.run/nexus/… generates a few warnings, but it's equivalent. However, I think it's fine to use int for everything, since it's the default integer type. Nov 29, 2016 at 21:28 • @Dennis I'm not used to omitting headers and ignoring warnings outside of C89, so I golf with all warnings enabled and as errors :P I'll rewrite in C89 though. – cat Nov 29, 2016 at 21:46 • @Dennis Fixed :D – cat Nov 29, 2016 at 22:39 # C, 110 bytes p;s;i;j;f(n){j=0;while(n){i=++j;p=1;s=0;do p*=i%10,s+=i%10;while((i/=10)>0);if(p>0&&j%p+j%s==0)--n;}return j;}  Ungolfed and usage: p;s;i;j; f(n){ j=0; while(n){ i=++j; p=1; s=0; do p*=i%10, //product s+=i%10; //sum while((i/=10)>0); //check if product is not zero since floating point exception if(p>0 && j%p + j%s == 0)--n; } return j; } int main(){ int n; scanf("%d",&n); printf("\n%d\n", f(n)); }  # Scala, 80 68 bytes Stream from 1 filter{n=>val x=n+""map(_-48.0);n%x.sum+n%x.product<1}  Try it online! 0-indexed. Streams are not only infinite collections but also functions taking an Int and giving the element at that index. Stream from 1 //Infinite stream starting at 1 filter { n => //Filter each n according to this predicate: val x = //List of digits n + "" //Convert to string map(_ - 48.0); //Turn each character into its corresponding number (as a double, so n%0 works later) n % x.sum + //n modulo the sum of its digits n%x.product //plus n modulo the product of its digits < 1 //Make sure that's less than 1, i.e. both are 0 }  # Husk, 13 bytes !f§Λ¦o§eΠΣdN  Try it online! Combinators good but combinators long :( -1 byte from Leo in SE Chat. # APL (Dyalog Unicode), 2527 bytes This even better answer curtesy of Adam 1+⍣{0=⍺|⍨(+/∧×/)⍎¨⍕⍺}⍣⎕⊢0  This is essentially the same just hcf is taken of the sum and product saving 2 bytes 1+⍣{0=∨/⍺|⍨(+/,×/)⍎¨⍕⍺}⍣⎕⊢0  Try it online! ⎕ ⍝ takes user input {...}⍣n ⍵ ⍝ repeats the function n times 1∘+⍣{0=∨/⍺|⍨(+/,×/)⍎¨⍕⍺} ⍝ given a number repeatetly adds 1(1∘+) untill the condition is satisfied {⍵|⍨(+/,×/)⍎¨⍕⍵} ⍝ converts numbers to a list of numbers and then take there sum and product and then take there reminder after dividing with the given number ∨/ ⍝ takes HCF of the list escecially checking if both the numbers are not zero 0= ⍝returs true if the hcf is zero  • Golfs down the the same as this. – Adám Jan 18, 2022 at 9:57 • TIO link for you: Try it online! – Adám Jan 18, 2022 at 9:57 # PHP, 96 bytes Takes n as a command line argument. ## Golfed for(;$i<$argv[1];)!($p=array_product($d=str_split(++$j)))|$j%array_sum($d)||$j%$p?:$i++;echo$j;


## Ungolfed

for (; $i <$argv[1];)                             // Loop until we've found the nth number as pass by command line
!($p = array_product($d = str_split(++$j))) || // Split our current number into its digits and assign that to a variable, then assign the product of that array to another variable. // As well, we're checking if the product equals 0, to prevent an error from trying to mod by 0 later. The condition short circuits before it happens.$j % array_sum($d) || // Check if the sum of the array is a divisor$j % $p // Check if the product is a divisor ?:$i++;                                       // Increment the number of found instances only if all conditions are met.
echo $j; // Output to screen.  ## PowerShell v2+, 84 bytes param($n)for(;$n){$n-=!(++$a%(($b=[char[]]"$a")-join'+'|iex)+$a%($b-join'*'|iex))}$a


Iterative solution. Takes input $n and enters a for loop so long as $n is not zero. Each iteration, we subtract from $n the result of a Boolean statement, broken out below: !(++$a%(($b=[char[]]"$a")-join'+'|iex)+$a%($b-join'*'|iex))
!(                                                        ) # Encapsulate in a NOT
++$a% # Increment$a and take mod ...
($b=[char[]]"$a")                                   # Turn $a into char-array, store in$b
-join'+'                           # Join the char-array together with +
|iex                       # and eval it
$a%($b-join'*'|iex)   # Similar for *


Thus, only if $a%(sum) and $a%(product) are both equal to zero will the addition also be zero, and thus the Boolean-not will be True and therefore $n is decremented. Once we exit the loop (i.e., we hit the nth term), we simply place $a on the pipeline, and output is implicit.

### Examples

Note: This tosses a bunch of "Attempted divide by zero" errors to STDERR, which is ignored by default. I've explicitly added a 2>$null to the example below to cleanup the output. It's also pretty slow once it gets to about 30 or so, and 50 takes about 45 seconds on my machine. PS C:\Tools\Scripts\golfing> 1,5,10,20,30,42,50|%{"$_ --> "+(.\numbers-divisible-by-sum-and-product.ps1 $_ 2>$null)}
1 --> 1
5 --> 5
10 --> 12
20 --> 312
30 --> 1344
42 --> 6912
50 --> 11313


# BASH, 125 bytes

while ((n<$1));do ((i++)) p(){ fold -1<<<$i|paste -sd$1|bc;} z=p \* ((z))&&[$[i%p +]$[i%z] -eq 0 ]&&((n++)) done echo$i