39
\$\begingroup\$

Write a program or function that finds the number of zeroes at the end of n! in base 10, where n is an input number (in any desired format).

It can be assumed that n is a positive integer, meaning that n! is also an integer. There are no zeroes after a decimal point in n!. Also, it can be assumed that your programming language can handle the value of n and n!.


Test cases

1
==> 0

5
==> 1

100
==> 24

666
==> 165

2016
==> 502

1234567891011121314151617181920
==> 308641972752780328537904295461

This is code golf. Standard rules apply. The shortest code in bytes wins.

\$\endgroup\$
10
  • \$\begingroup\$ Related. \$\endgroup\$
    – xnor
    May 12, 2016 at 2:39
  • 1
    \$\begingroup\$ Can we assume that n! will fit within our languages' native integer type? \$\endgroup\$
    – Alex A.
    May 12, 2016 at 2:45
  • 1
    \$\begingroup\$ @AlexA. Yes you can. \$\endgroup\$
    – Arcturus
    May 12, 2016 at 3:01
  • 17
    \$\begingroup\$ I think this would be a better question if you were not allowed to assume n! would fit into your integer type! Well, maybe another time. \$\endgroup\$
    – A Simmons
    May 12, 2016 at 10:45
  • 1
    \$\begingroup\$ @ASimmons Most of the answers so far, or at least the ones that use the floor division trick, don't rely on that assumption anyway. \$\endgroup\$
    – Alex A.
    May 12, 2016 at 16:53

62 Answers 62

45
\$\begingroup\$

Python 2, 27 bytes

f=lambda n:n and n/5+f(n/5)

The ending zeroes are limited by factors of 5. The number of multiples of 5 that are at most n is n/5 (with floor division), but this doesn't count the repeated factors in multiples of 25, 125, .... To get those, divide n by 5 and recurse.

\$\endgroup\$
21
\$\begingroup\$

Mornington Crescent, 1949 1909 1873 bytes

Take Northern Line to Bank
Take Circle Line to Bank
Take District Line to Parsons Green
Take District Line to Cannon Street
Take Circle Line to Victoria
Take Victoria Line to Seven Sisters
Take Victoria Line to Victoria
Take Circle Line to Victoria
Take Circle Line to Bank
Take Circle Line to Hammersmith
Take District Line to Turnham Green
Take District Line to Hammersmith
Take District Line to Upminster
Take District Line to Hammersmith
Take District Line to Turnham Green
Take District Line to Bank
Take Circle Line to Hammersmith
Take Circle Line to Blackfriars
Take Circle Line to Hammersmith
Take Circle Line to Notting Hill Gate
Take Circle Line to Notting Hill Gate
Take Circle Line to Bank
Take Circle Line to Hammersmith
Take District Line to Upminster
Take District Line to Upney
Take District Line to Upminster
Take District Line to Upney
Take District Line to Upminster
Take District Line to Upney
Take District Line to Upminster
Take District Line to Bank
Take Circle Line to Blackfriars
Take District Line to Upminster
Take District Line to Temple
Take Circle Line to Hammersmith
Take Circle Line to Cannon Street
Take Circle Line to Bank
Take Circle Line to Blackfriars
Take Circle Line to Hammersmith
Take District Line to Upney
Take District Line to Cannon Street
Take District Line to Upney
Take District Line to Cannon Street
Take District Line to Upney
Take District Line to Blackfriars
Take Circle Line to Bank
Take District Line to Upminster
Take District Line to Upney
Take District Line to Upminster
Take District Line to Upney
Take District Line to Upminster
Take District Line to Upney
Take District Line to Bank
Take Circle Line to Bank
Take Northern Line to Angel
Take Northern Line to Bank
Take Circle Line to Bank
Take District Line to Upminster
Take District Line to Bank
Take Circle Line to Bank
Take Northern Line to Mornington Crescent

Try it online!

-40 bytes thanks to NieDzejkob

-45 bytes thanks to Cloudy7

\$\endgroup\$
5
  • \$\begingroup\$ And this is now my most upvoted answer. \$\endgroup\$ May 17, 2016 at 13:25
  • 3
    \$\begingroup\$ A brief explanation for those of us who are Mornington Crescent-challenged would be cool. :) \$\endgroup\$ Mar 23, 2017 at 13:26
  • \$\begingroup\$ -40 bytes by using shorter line names where possible. \$\endgroup\$
    – Maya
    Mar 15, 2018 at 17:02
  • \$\begingroup\$ -45 bytes by using Upney instead of Becontree. \$\endgroup\$
    – Cloudy7
    Mar 12, 2021 at 3:42
  • 1
    \$\begingroup\$ Yeah, I wasn't very efficient at choosing station names when I wrote this code in 2016. \$\endgroup\$ Mar 12, 2021 at 5:06
19
\$\begingroup\$

Jelly, 5 bytes

!Æfċ5

Uses the counterproductive approach of finding the factorial then factorising it again, checking for the exponent of 5 in the prime factorisation.

Try it online!

!              Factorial
 Æf            List of prime factors, e.g. 120 -> [2, 2, 2, 3, 5]
   ċ5          Count number of 5s
\$\endgroup\$
1
  • 5
    \$\begingroup\$ yikes. Talk about trade-offs! To get the code down to 5 bytes, increase the memory and time by absurd amounts. \$\endgroup\$ May 12, 2016 at 16:18
18
\$\begingroup\$

Pyth, 6 bytes

/P.!Q5

Try it here.

/    5   Count 5's in
 P        the prime factorization of
  .!Q      the factorial of the input.

Alternative 7-byte:

st.u/N5

The cumulative reduce .u/N5 repeatedly floor-divides by 5 until it gets a repeat, which in this case happens after it hits 0.

34 -> [34, 6, 1, 0]

The first element is then removed (t) and the rest is summed (s).

\$\endgroup\$
13
\$\begingroup\$

Actually, 10 bytes

!$R;≈$l@l-

Try it online!

Note that the last test case fails when running Seriously on CPython because math.factorial uses a C extension (which is limited to 64-bit integers). Running Seriously on PyPy works fine, though.

Explanation:

!$R;≈$l@l-
!           factorial of input
 $R         stringify, reverse
   ;≈$      make a copy, cast to int, then back to string (removes leading zeroes)
      l@l-  difference in lengths (the number of leading zeroes removed by the int conversion)
\$\endgroup\$
3
  • 3
    \$\begingroup\$ Oh wow, I like how this method doesn't use the dividing by 5 trick. \$\endgroup\$
    – Arcturus
    May 12, 2016 at 4:36
  • \$\begingroup\$ I count 12 bytes on this one \$\endgroup\$ May 14, 2016 at 2:09
  • 1
    \$\begingroup\$ @Score_Under Actually uses the CP437 code page, not UTF-8. Each character is one byte. \$\endgroup\$
    – user45941
    May 14, 2016 at 2:41
11
\$\begingroup\$

Haskell, 26 bytes

f 0=0
f n=(+)=<<f$div n 5

Floor-divides the input by 5, then adds the result to the function called on it. The expression (+)=<<f takes an input x and outputs x+(f x).

Shortened from:

f 0=0
f n=div n 5+f(div n 5)

f 0=0
f n|k<-div n 5=k+f k

A non-recursive expression gave 28 bytes:

f n=sum[n`div`5^i|i<-[1..n]]
\$\endgroup\$
2
  • \$\begingroup\$ Is i a counter from 1..n? \$\endgroup\$ May 12, 2016 at 3:35
  • \$\begingroup\$ @CᴏɴᴏʀO'Bʀɪᴇɴ Yes, though only up to log_5(n) matters, the rest gives 0. \$\endgroup\$
    – xnor
    May 12, 2016 at 3:36
8
\$\begingroup\$

MATL, 9 bytes

:"@Yf5=vs

Try it online!

This works for very large numbers, as it avoids computing the factorial.

Like other answers, this exploits the fact that the number of times 2 appears as divisor of the factorial is greater or equal than the number of times 5 appears.

:     % Implicit input. Inclusive range from 1 to that
"     % For each
  @   %   Push that value
  Yf  %   Array of prime factors
  5=  %   True for 5, false otherwise
  v   %   Concatenate vertically all stack contents
  s   %   Sum
\$\endgroup\$
6
\$\begingroup\$

05AB1E, 5 bytes

Would be 4 bytes if we could guarantee n>4

Code:

Î!Ó7è

Explanation:

Î        # push 0 then input
  !      # factorial of n: 10 -> 2628800
   Ó     # get primefactor exponents -> [8, 4, 2, 1]
    7è   # get list[7] (list is indexed as string) -> 2
         # implicit output of number of 5s or 0 if n < 5

Alternate, much faster, 6 byte solution: Inspired by Luis Mendo's MATL answer

LÒ€`5QO

Explanation:

L         # push range(1,n) inclusive, n=10 -> [1,2,3,4,5,6,7,8,9,10]
 Ò        # push prime factors of each number in list -> [[], [2], [3], [2, 2], [5], [2, 3], [7], [2, 2, 2], [3, 3], [2, 5]]
  €`      # flatten list of lists to list [2, 3, 2, 2, 5, 2, 3, 7, 2, 2, 2, 3, 3, 2, 5]
    5Q    # and compare each number to 5 -> [0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1]
      O   # sum -> 2

Edit: removed solutions using ¢ (count) as all primes containing 5 would be counted as 5 e.g. 53.

Edit 2: added a more efficient solution for higher input as comparison.

\$\endgroup\$
5
  • \$\begingroup\$ Yeah, instead of , 5Q should work. Nice answer though! :) \$\endgroup\$
    – Adnan
    May 12, 2016 at 8:41
  • \$\begingroup\$ I was going to test on larger inputs with the comment "wouldn't this fail if the output was > 9", but boy 05AB1E's implementation of Ó is slow \$\endgroup\$
    – Sp3000
    May 12, 2016 at 9:51
  • \$\begingroup\$ Btw, the first code can also be Î!Ó2é. The bug was fixed yesterday. \$\endgroup\$
    – Adnan
    May 12, 2016 at 10:15
  • \$\begingroup\$ If you're using utf-8, Î!Ó7è is 8 bytes, and the "6 byte" solution is 10 bytes \$\endgroup\$ May 14, 2016 at 2:11
  • \$\begingroup\$ @Score_Under Yes that is correct. However, 05AB1E uses the CP-1252 encoding. \$\endgroup\$
    – Adnan
    May 14, 2016 at 8:50
6
\$\begingroup\$

Matlab (59) (54)(39)

Hey dawg !!!! we heard you like maths ....

  @(n)sum(fix(n./5.^(1:fix(log(n)/1.6))))
  • This is based on my created answer in code review.

  • further than what is mentioned in my answer in code review, the formula for number of zeros in factorial(n) is Sum(n/(5^k)) where k varies between 1 and log_5(n)

  • The only trivial reason why it cant get golfier is that log5 isnt available in matlab as a builtin , thus I replaced log(5) by 1.6, doesnt matter because it will be anyways floored.

Give it a try

\$\endgroup\$
3
  • \$\begingroup\$ A couple of questions. 1. How do you actually run this in Matlab? 2. What is the result for n=1? \$\endgroup\$ May 12, 2016 at 14:46
  • \$\begingroup\$ @StuartBruff to run this type ans(1) and it does return 0. \$\endgroup\$
    – Abr001am
    May 12, 2016 at 16:09
  • \$\begingroup\$ OK. Thanks. Interesting. I haven't used function handles much in Matlab, so was a little puzzled as to how to run it ... why doesn't the ans() count towards the total? Neat answer though, I tried it in Mathcad but had to modify the upper limit of the sum as Mathcad autodecrements the summation variable if the "upper" is less than the "lower" limit (and hence my question about 0). \$\endgroup\$ May 13, 2016 at 12:27
5
\$\begingroup\$

Mathematica, 20 bytes

IntegerExponent[#!]&

IntegerExponent counts the zeros. For fun, here's a version that doesn't calculate the factorial:

Tr[#~IntegerExponent~5&~Array~#]&
\$\endgroup\$
1
  • \$\begingroup\$ I think Array saves a byte on the second solution. \$\endgroup\$ May 12, 2016 at 12:54
5
\$\begingroup\$

Julia, 34 31 30 bytes

n->find(digits(prod(1:n)))[]-1

This is an anonymous function that accepts any signed integer type and returns an integer. To call it, assign it to a variable. The larger test cases require passing n as a larger type, such as a BigInt.

We compute the factorial of n (manually using prod is shorter than the built-in factorial), get an array of its digits in reverse order, find the indices of the nonzero elements, get the first such index, and subtract 1.

Try it online! (includes all but the last test case because the last takes too long)

Saved a byte thanks to Dennis!

\$\endgroup\$
0
5
\$\begingroup\$

C, 28 bytes

f(n){return(n/=5)?n+f(n):n;}

Explanation

The number of trailing zeros is equal to the number of fives that make up the factorial. Of all the 1..n, one-fifth of them contribute a five, so we start with n/5. Of these n/5, a fifth are multiples of 25, so contribute an extra five, and so on. We end up with f(n) = n/5 + n/25 + n/125 + ..., which is f(n) = n/5 + f(n/5). We do need to terminate the recursion when n reaches zero; also we take advantage of the sequence point at ?: to divide n before the addition.

As a bonus, this code is much faster than that which visits each 1..n (and much, much faster than computing the factorial).

Test program

#include<stdio.h>
#include<stdlib.h>
int main(int argc, char **argv) {
    while(*++argv) {
        int i = atoi(*argv);
        printf("%d: %d\n",i,f(i));
    }
}

Test output

1: 0
4: 0
5: 1
24: 4
25: 6
124: 28
125: 31
666: 165
2016: 502
2147483644: 536870901
2147483647: 536870902

\$\endgroup\$
1
  • 2
    \$\begingroup\$ +1 for an excellent explanation \$\endgroup\$
    – Titus
    Jun 5, 2018 at 10:42
4
\$\begingroup\$

JavaScript ES6, 20 bytes

f=x=>x&&x/5+f(x/5)|0

Same tactic as in xnor's answer, but shorter.

\$\endgroup\$
0
4
\$\begingroup\$

C, 36

r;f(n){for(r=0;n/=5;)r+=n;return r;}

Same method as @xnor's answer of counting 5s, but just using a simple for loop instead of recursion.

Ideone.

\$\endgroup\$
2
  • \$\begingroup\$ @TobySpeight there you go. \$\endgroup\$ May 13, 2016 at 17:01
  • \$\begingroup\$ suggestion: omit r=0, since globals are zeroed by default. \$\endgroup\$ Jul 29, 2021 at 17:16
4
\$\begingroup\$

Jelly, 3 bytes

!ọ5

Try it online!

How it works

!ọ5 - Main link. Takes n on the left
!   - Yield n!
 ọ5 - How many times is it divisible by 5?
\$\endgroup\$
3
\$\begingroup\$

Retina, 33 bytes

Takes input in unary.

Returns output in unary.

+`^(?=1)(1{5})*1*
$#1$*1;$#1$*
;

(Note the trailing linefeed.)

Try it online!

How it works:

The first stage:

+`^(?=1)(1{5})*1*
$#1$*1;$#1$*

Slightly ungolfed:

+`^(?=1)(11111)*1*\b
$#1$*1;$#1$*1

What it does:

  • Firstly, find the greatest number of 11111 that can be matched.
  • Replace by that number
  • Effectively floor-divides by 5.
  • The lookahead (?=1) assures that the number is positive.
  • The +` means repeat until idempotent.
  • So, the first stage is "repeated floor-division by 5"

If the input is 100 (in unary), then the text is now:

;;1111;11111111111111111111

Second stage:

;

Just removes all semi-colons.

\$\endgroup\$
2
\$\begingroup\$

Ruby, 22 bytes

One of the few times where the Ruby 0 being truthy is a problem for byte count.

f=->n{n>0?f[n/=5]+n:0}
\$\endgroup\$
3
  • \$\begingroup\$ wait why is 0 truthy? \$\endgroup\$ May 12, 2016 at 4:00
  • 2
    \$\begingroup\$ @CᴏɴᴏʀO'Bʀɪᴇɴ In Ruby, nil and false are falsey, and nothing else is. There are a lot of cases where helps out in golf, since having 0 be truthy means the index and regex index functions in Ruby return nil if there is no match instead of -1, and some where it is a problem, like empty strings still being truthy. \$\endgroup\$
    – Value Ink
    May 12, 2016 at 4:24
  • \$\begingroup\$ @KevinLau-notKenny That does make sense. \$\endgroup\$ May 12, 2016 at 4:25
2
\$\begingroup\$

Perl 6, 23 bytes

{[+] -$_,$_,*div 5…0}
{sum -$_,$_,*div 5...0}

I could get it shorter if ^... was added to Perl 6 {sum $_,*div 5^...0}.
It should be more memory efficient for larger numbers if you added a lazy modifier between sum and the sequence generator.

Explanation:

{ # implicitly uses $_ as its parameter
  sum

    # produce a sequence
    -$_,     # negate the next value
     $_,     # start of the sequence

     * div 5 # Whatever lambda that floor divides its input by 5

             # the input being the previous value in the sequence,
             # and the result gets appended to the sequence

     ...     # continue to do that until:

     0       # it reaches 0
}

Test:

#! /usr/bin/env perl6

use v6.c;
use Test;

my @test = (
     1,   0,
     5,   1,
   100,  24,
   666, 165,
  2016, 502,
  1234567891011121314151617181920,
        308641972752780328537904295461,

  # [*] 5 xx 100
  7888609052210118054117285652827862296732064351090230047702789306640625,
        1972152263052529513529321413206965574183016087772557511925697326660156,
);

plan @test / 2;

# make it a postfix operator, because why not
my &postfix:<!0> = {[+] -$_,$_,*div 5...0}

for @test -> $input, $expected {
  is $input!0, $expected, "$input => $expected"
}

diag "runs in {now - INIT now} seconds"
1..7
ok 1 - 1 => 0
ok 2 - 5 => 1
ok 3 - 100 => 24
ok 4 - 666 => 165
ok 5 - 2016 => 502
ok 6 - 1234567891011121314151617181920 => 308641972752780328537904295461
ok 7 - 7888609052210118054117285652827862296732064351090230047702789306640625 => 1972152263052529513529321413206965574183016087772557511925697326660156
# runs in 0.0252692 seconds

( That last line is slightly misleading, as MoarVM has to start, load the Perl 6 compiler and runtime, compile the code, and run it. So it actually takes about a second and a half in total.
That is still significantly faster than it was to check the result of the last test with WolframAlpha.com )

\$\endgroup\$
2
\$\begingroup\$

Mathcad, [tbd] bytes

enter image description here

Mathcad is sort of mathematical "whiteboard" that allows 2D entry of expressions, text and plots. It uses mathematical symbols for many operations, such as summation, differentiation and integration. Programming operators are special symbols, usually entered as single keyboard combinations of control and/or shift on a standard key.

What you see above is exactly how the Mathcad worksheet looks as it is typed in and as Mathcad evaluates it. For example, changing n from 2016 to any other value will cause Mathcad to update the result from 502 to whatever the new value is.

http://www.ptc.com/engineering-math-software/mathcad/free-download


Mathcad's byte equivalence scoring method is yet to be determined. Taking a symbol equivalence, the solution takes about 24 "bytes" (the while operator can only be entered using the "ctl-]" key combination (or from a toolbar)). Agawa001's Matlab method takes about 37 bytes when translated into Mathcad (the summation operator is entered by ctl-shft-$).

\$\endgroup\$
1
  • \$\begingroup\$ Sounds a stunning tool to handle, I wont spare a second downloading it ! \$\endgroup\$
    – Abr001am
    May 13, 2016 at 13:42
2
\$\begingroup\$

Julia, 21 19 bytes

!n=n<5?0:!(n÷=5)+n

Uses the recursive formula from xnor's answer.

Try it online!

\$\endgroup\$
2
\$\begingroup\$

dc, 12 bytes

[5/dd0<f+]sf

This defines a function f which consumes its input from top of stack, and leaves its output at top of stack. See my C answer for the mathematical basis. We repeatedly divide by 5, accumulating the values on the stack, then add all the results:

5/d   # divide by 5, and leave a copy behind
d0<   # still greater than zero?
f+    # if so, apply f to the new value and add

Test program

# read input values
?
# print prefix
[  # for each value
    # print prefix
    [> ]ndn[ ==> ]n
    # call f(n)
    lfx
    # print suffix
    n[  
]n
    # repeat for each value on stack
    z0<t
]
# define and run test function 't'
dstx

Test output

./79762.dc <<<'1234567891011121314151617181920 2016 666 125 124 25 24 5 4 1'
1 ==> 0  
4 ==> 0  
5 ==> 1  
24 ==> 4  
25 ==> 6  
124 ==> 28  
125 ==> 31  
666 ==> 165  
2016 ==> 502  
1234567891011121314151617181920 ==> 308641972752780328537904295461  
\$\endgroup\$
2
\$\begingroup\$

Vyxal s, 5 bytes

ɾǐƛ5O  # main program
ɾ      # range over input
 ǐ     # take the prime factors of each number
  ƛ5O  # for each value, count the 5s
-s     # sum top of stack

Try it Online!

Vyxal, 3 bytes

¡5Ǒ

This one uses the same approach as caird coinheringaahing's answer

Try it Online!

Vyxal l, 3 bytes (for inputs > 4)

¡Ġt

Approach by Lyxal, takes the factorial of the input, groups by consecutive, then gets the length of the tail using the -l flag.

Try it Online!

\$\endgroup\$
4
  • \$\begingroup\$ Alternate 3 bytes that isn't a caird port \$\endgroup\$
    – lyxal
    Jul 26, 2021 at 8:04
  • \$\begingroup\$ @lyxal added it \$\endgroup\$
    – Underslash
    Jul 26, 2021 at 20:00
  • 2
    \$\begingroup\$ The last one doesn't work for inputs <=5, where there are no trailing 0's \$\endgroup\$
    – ovs
    Jul 28, 2021 at 21:25
  • \$\begingroup\$ @ovs true, I'll add a comment about that \$\endgroup\$
    – Underslash
    Jul 28, 2021 at 23:46
2
\$\begingroup\$

asm2bf, 32 bytes

@f
divr1,5
addr2,r1
jnzr1,%f
ret

Resulting brainfuck code (~500 bytes):

+>+[<[>-]>[>]>+<<<[>>>[-]<-<<-]+>>+[-<[>+>-<<-]>>[<<<->>[<+
>>+<-]>[-]]<[-]]<<[>>+<<-]>>[-<<+>>>>>>>>>+++++[>>>>+<<<<-]
<<<<[>>>>>>>+>-[>>]<[[>+<-]<+>>>]<<<<<<<<<-]>>>>>>[<<<<<<+>
>>>>>-]>[<<<+>>>-]>[<<<<+>>>>-]<<<<[-]<<<<[>+<<+>-]<[>+<-]>
>>>>+<<<<[<<<<<[-]>>>>>>>>>[<<<<<<<<+>+>>>>>>>-]<<<<<<<[>>>
>>>>+<<<<<<<-]>>>[<<<+>>>-]]<<<[>>>+<<<-]>>>>>>>[-]<<<<<<<]
<<[>>+<<-]>>[-<<+[-]>[-]>>>>>>>>>>>>>>>>>>>>>[>>]<<->[<<<[<
<]<<<<<<<<<<<<<<<<<<<+>>>>>>>>>>>>>>>>>>>>>[>>]>-]<<<[<<]<<
<<<<<<<<<[-]<<<<<<<]<<[>>+<<-]>>[-<<+>>]<]

Extras

If you want to test the algorithm, you can use the following driver code. The code expects r1 to be the input number and leaves the output in r2, assuming r2 is already cleared:

movr1,666
@f
divr1,5
addr2,r1
jnzr1,%f
outr1

The resulting value might be outputted as an ASCII character, so you might have to use bfi fac.b | xxd to see the numerical value.

Optimizing for brainfuck source code size

We can optimize the code a fair bit. Since brainfuck has no notion of procedures, we can assume that @f is a while loop label (instead of being both a function and a normal label) and that we don't have to return.

The jnz instruction and the accompanying label can be replaced with a sequence of nav r1 / raw .[ or .]. To top it off, we use the -t flag for bfmake. The result:

>>>[>>>>+++++[>>>>+<<<<-]<<<<[>>>>>>>+>-[>>]<[[>+<-]<+>>>]<<<<<<<<<-]>>>>>>[<<<<<<+>>>>>>-]>[<<<+>>>-]>[<<<<+>>>>-]<<<<[-]<<<<[>+<<+>-]<[>+<-]>]

... at 144 bytes.

\$\endgroup\$
2
\$\begingroup\$

Excel, 25 bytes

=SUM(INT(A9/5^ROW(1:99)))

Calculates the number of 5s in the prime factorization. In theory, it would work for all of the examples above, except Excel can't handle numbers as long as the last one with the correct precision.

\$\endgroup\$
1
\$\begingroup\$

Jolf, 13 bytes

Ώmf?H+γ/H5ΏγH

Defines a recursive function which is called on the input. Try it here!

Ώmf?H+γ/H5ΏγH  Ώ(H) = floor(H ? (γ = H/5) + Ώ(γ) : H)
Ώ              Ώ(H) =
       /H5                           H/5
      γ                         (γ =    )
     +    Ώγ                              + Ώ(γ)
   ?H       H               H ?                  : H
 mf                   floor(                        )
               // called implicitly with input
\$\endgroup\$
1
\$\begingroup\$

J, 28 17 16 bytes

<.@+/@(%5^>:@i.)

Pretty much the same as the non-recursive technique from xnor's answer.


Here's an older version I have kept here because I personally like it more, clocking in at 28 bytes:

+/@>@{:@(0<;._1@,'0'&=@":@!)

Whilst not needed, I have included x: in the test cases for extended precision.

   tf0 =: +/@>@{:@(0<;._1@,'0'&=@":@!@x:)
   tf0 5
1
   tf0 100
24

   tf0g =: tf0"0
   tf0g 1 5 100 666 2016
0 1 24 165 502

The last number doesn't work with this function.

Explanation

This works by calculating n!, converting it to a string, and checking each member for equality with '0'. For n = 15, this process would be:

15
15! => 1307674368000
": 1307674368000 => '1307674368000'
'0' = '1307674368000' => 0 0 1 0 0 0 0 0 0 0 1 1 1

Now, we use ;._1 to split the list on its first element (zero), boxing each split result, yielding a box filled with aces (a:) or runs of 1s, like so:

┌┬─┬┬┬┬┬┬┬─────┐
││1│││││││1 1 1│
└┴─┴┴┴┴┴┴┴─────┘

We simple obtain the last member ({:), unbox it (>), and perform a summation over it +/, yielding the number of zeroes.

Here is the more readable version:

split =: <;._1@,
tostr =: ":
is =: =
last =: {:
unbox =: >
sum =: +/
precision =: x:
n =: 15

NB. the function itself
tf0 =: sum unbox last 0 split '0' is tostr ! precision n
tf0 =: sum @ unbox @ last @ (0 split '0'&is @ tostr @ ! @ precision)
tf0 =: +/ @ > @ {: @ (0 <;._1@, '0'&= @ ": @ ! )
\$\endgroup\$
2
  • \$\begingroup\$ >:@i. can be written 1+i. to save a byte. \$\endgroup\$ May 18, 2016 at 21:02
  • \$\begingroup\$ Your older version can be made into [:#.~'0'=":@! for 13 bytes by changing the method of counting the trailing 1s. \$\endgroup\$
    – cole
    Dec 28, 2017 at 1:11
1
\$\begingroup\$

Python 3, 52 bytes

g=lambda x,y=1,z=0:z-x if y>x else g(x,y*5,z+x//y)
\$\endgroup\$
0
1
\$\begingroup\$

Pyke, 5 bytes

SBP5/

Try it here!

S     -    range(1,input()+1)
 B    -   product(^)
  P   -  prime_factors(^)
   5/ - count(^, 5)
\$\endgroup\$
1
\$\begingroup\$

Haskell, 39 bytes

Can't compete with @xnor, but it was fun and the result is a different approach:

f n=sum$[1..n]>>= \i->1<$[5^i,2*5^i..n]
\$\endgroup\$
1
\$\begingroup\$

RETURN, 17 bytes

[$[5÷\%$F+][]?]=F

Try it here.

Recursive operator lambda. Usage:

[$[5÷\%$F+][]?]=F666F

Explanation

[             ]=F  Lambda -> Operator F
 $                 Check if top of stack is truthy
  [       ][]?     Conditional
   5÷\%$F+         If so, do x/5+F(x/5)
\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.