173
\$\begingroup\$

What general tips do you have for golfing in JavaScript? I'm looking for ideas that can be applied to code golf problems in general that are at least somewhat specific to JavaScript (e.g. "remove comments" is not an answer).

Note: Also see Tips for Golfing in ECMAScript 6 and above

\$\endgroup\$
4
  • \$\begingroup\$ I was actually wondering, is it allowed to put variables in global (saves var)? And should JavaScript golf code be a function or output something directly? I honestly think this can make much difference. \$\endgroup\$
    – pimvdb
    May 27, 2011 at 5:28
  • 1
    \$\begingroup\$ @primvdb: It is allowed, but you have to be careful because it can cause side-effects if a function is called multiple times and it is manipulating global variables, or if it is a recursive function. \$\endgroup\$
    – mellamokb
    May 27, 2011 at 13:44
  • \$\begingroup\$ This link has a bunch of tips relevant here. \$\endgroup\$
    – Claudia
    Feb 12, 2015 at 4:53
  • 1
    \$\begingroup\$ I have discovered probably the most useless tip: a private class element doesn’t require a space before the private identifier in cases where it is preceded by a keyword: (class{static #x = 1;get #y(){};set #y(z){}}) can be rewritten as (class{static#x = 1;get#y(){};set#y(z){}}). This makes for some nice obfuscation, too, but I can’t think of a practical example in code golf. \$\endgroup\$ Nov 1, 2021 at 15:26

98 Answers 98

152
\$\begingroup\$

Splitting with numbers to save the quotemarks:

"alpha,bravo,charlie".split(",") // before
"alpha0bravo0charlie".split(0)   // after
\$\endgroup\$
6
  • 2
    \$\begingroup\$ It works, and I've used it for multiple digits. \$\endgroup\$
    – Claudia
    Feb 12, 2015 at 3:55
  • 16
    \$\begingroup\$ Lol this is actually pretty creative \$\endgroup\$ Nov 3, 2015 at 19:37
  • 27
    \$\begingroup\$ in ES6 this doesn't matter anymore, you can just do .split`...` \$\endgroup\$ Apr 15, 2017 at 22:41
  • 10
    \$\begingroup\$ "alpha,bravo,charlie".split`,` \$\endgroup\$ Sep 16, 2019 at 9:32
  • 2
    \$\begingroup\$ I've also used "AlphaBravoCharlie".split(/(?=[A-Z])/) once. Only useful when you have a lot of words to split. \$\endgroup\$
    – Domino
    Apr 1, 2022 at 15:26
130
\$\begingroup\$

Fancy For Loops

you can use the standard for loop in non-standard ways

for ( a; b; c )

is essentially equivalent to:

a;
while ( b )
{
  ...
  c;
}

so a good trick is to write your code with a while loop, and then split it into the a,b,c parts in a for loop.

A couple examples I've written:

for(x=y=n;!z;x--,y++)z=i(x)?x:i(y)?y:0
for(a=b=1;b<n;c=a+b,a=b,b=c);

Chain your setters

If you're initializing or resetting multiple values, chain the value to all the variables that need it:

a=b=1;

Implicit Casting

Don't check your types, just use them as they are. parseInt() costs 10 characters. If you need to cast out of a string, be creative:

a='30';
b='10';
c = a + b; //failure
c = parseInt(a) + parseInt(b) //too long

c = -(-a-b); //try these
c = ~~a+~~b;
c = +a+ +b;
c = a- -b;

Avoid Semicolons

JavaScript has automatic semi-colon insertion. Use it often and well.

One-liners

Save on brackets by shoving as much as possible into single lines, or parameters:

a( realParam1, realParam2, fizz='buzz' )

Increment/Decrement operators

a = a - 1;
foo(a);

and

foo(a);
a = a - 1;

can easily be rewritten as

foo(--a);

and

foo(a--);

respectively.

Use this or self instead of window in global context

self explanatory 2 character savings.

Use bracket notation for repeat property access

This is definitely a balancing act between property name length and number of accesses. Instead of calling a.longFunctionName() with dot notation twice, it's shorter to save the name and call the function via bracket notation:

a.longFunctionName(b)
a.longFunctionName(c)
//42

-vs-

a[f='longFunctionName'](b)
a[f](c)
//34

this is especially effective with functions like document.getElementById which can be reduced to d[e].

Note:

With bracket notation, the cost is 6 + name.length characters the first time. Each subsequent access has a cost of 3 characters.

For dot notation, all accesses cost name.length + 1 (+1 for the .) characters.

Use this method if 6 + name.length + (3 * (accesses - 1)) < accesses * (name.length + 1).

len = length of property name
i = minimum accesses to take advantage

len | i 
========
1   | ∞ 
2   | ∞ 
3   | 7 
4   | 4 
5   | 3 
6   | 3 
7   | 3 
8+  | 2 

The number of accesses can also span multiple objects. If you access .length 4 or more times on different arrays, you can use the same variable holding the string 'length'.

\$\endgroup\$
12
  • 5
    \$\begingroup\$ c = ~~a-~~b should be c = ~~a+~~b. Also, you can implicitly cast to integer using |0, for example Math.random()*6|0. \$\endgroup\$
    – mellamokb
    Jun 1, 2011 at 19:48
  • 7
    \$\begingroup\$ It's cheaper to coerce a string to a number with the unary plus operator. If a and b are strings, you can do +a+b to convert to number and add them. \$\endgroup\$ Dec 2, 2011 at 21:38
  • 11
    \$\begingroup\$ I swear I'm going to use d- -b in my code someday... \$\endgroup\$ Dec 19, 2013 at 14:21
  • 5
    \$\begingroup\$ +a+b doesn't work (at least on mine...) // a="1",b="1",+a+b // gives "11" \$\endgroup\$
    – imma
    Jan 16, 2014 at 11:46
  • 3
    \$\begingroup\$ For "Use Array-Access for repeat function calls" if you're using the function more than twice on the same object, what's a bit shorter is to assign the function to a new member like a.f=a.longfunctionname;a.f(b);a.f(c);a.f(d) \$\endgroup\$ Sep 11, 2014 at 14:40
66
\$\begingroup\$

Use the comma operator to avoid braces (also applies to C):

if(i<10)m+=5,n-=3;

Instead of

if(i<10){m+=5;n-=3}

which is one character longer.

\$\endgroup\$
4
  • 2
    \$\begingroup\$ Is the semicolon necessary at the end of the first sample? \$\endgroup\$
    – wjl
    Aug 20, 2012 at 6:12
  • 4
    \$\begingroup\$ @wjlafrance: It would only not be required if it's at the end of the one-liner. \$\endgroup\$
    – mellamokb
    Aug 20, 2012 at 14:57
  • 6
    \$\begingroup\$ This can also be written as i<10&&m+=5,n-=3 \$\endgroup\$
    – pavi2410
    Nov 11, 2019 at 21:41
  • 1
    \$\begingroup\$ @pavi2410 That doesn't parse correctly due to precedence issues. \$\endgroup\$
    – Maya
    Apr 22, 2023 at 6:48
57
\$\begingroup\$

Shorter random number generation

If you need a random boolean (0 or 1):

new Date&1 // equivalent to Math.random()<0.5

If you need a random integer 0 <= n < 1337:

new Date%1337 // equivalent to Math.floor(Math.random()*1337))

This works because a Date is stored internally in JavaScript as the amount of milliseconds since an epoch, so the new Date is being coerced into 123somebignumber456 when you try to do integer math on it.

Of course, these "random" numbers really won't be as random, especially if you call them multiple times in quick succession, so keep that in mind.

\$\endgroup\$
1
40
\$\begingroup\$

You can use the object literal form of get/set to avoid using the keyword function.

var obj = {
  get f(){
    console.log("just accessing this variable runs this code");
    return "this is actually a function";
  },
  set f(v){
    console.log("you can do whatever you want in here, passed: " + v);
  }
};

1 && obj.f; // runs obj.[[get f]]
obj.f = Infinity; // runs obj.[[set f]](Infinity)
\$\endgroup\$
3
  • \$\begingroup\$ the getter/setter part was really helpful. thx \$\endgroup\$
    – gion_13
    Mar 14, 2012 at 10:01
  • 1
    \$\begingroup\$ Actually, even better is an object method, if you only use it <= 2 times. On the other hand, arrow functions are far better at cutting down characters, as they serve almost the same purpose, and classes are rarely useful in golfed code. \$\endgroup\$
    – Claudia
    Feb 12, 2015 at 3:57
  • \$\begingroup\$ if support is important arrow functions aren't supported in fx. ie11 \$\endgroup\$
    – Jim Wolff
    Sep 18, 2017 at 13:38
39
\$\begingroup\$

This one is lesser known and lesser used, but can be impressive if used in the right situation. Consider a function that takes no arguments and always returns a different number when called, and the returned number will be used in a calculation:

var a = [ 
    Math.random()*12|0,
    Math.random()*11|0,
    Math.random()*10|0,
    /* etc... */ 
];

You might normally shorten this function using a single-letter variable name:

var r=Math.random,a=[r()*12|0,r()*11|0,r()*10|0,r()*9|0,r()*8|0,r()*7|0,r()*6|0,r()*5|0];

A better way to reduce the length is by abusing valueOf, which gives you a saving of 2 characters per invocation. Useful if you call the function more than 5 times:

var r={valueOf:Math.random},a=[r*12|0,r*11|0,r*10|0,r*9|0r*8|0,r*7|0,r*6|0,r*5|0];
\$\endgroup\$
4
  • 9
    \$\begingroup\$ Or, you could do it like either of these: let a=[5,6,7,8,9,10,11,12].map(x=>x*Math.random()|0) or let a=Array(7).map((_,i)=>i*Math.random()|0+5), 36 or 42 bytes saved, respectively. \$\endgroup\$
    – Claudia
    Feb 12, 2015 at 4:05
  • \$\begingroup\$ Is it possible to replace r(), or make it shorter? \$\endgroup\$ Nov 3, 2015 at 19:46
  • 4
    \$\begingroup\$ r={valueOf:Math.random} That's just genius :D \$\endgroup\$ Nov 22, 2016 at 17:03
  • 2
    \$\begingroup\$ @Isiah, well yeah, you can do that now :-D \$\endgroup\$
    – Andy E
    Nov 22, 2016 at 22:57
35
\$\begingroup\$

Taking advantage of short-circuit operators

Rather than long if statements or using ternary operators, you can make use of && and || to shorten your code. For instance:

var match = RegExp('[?&]' + name + '=([^&]*)').exec(window.location.search);

return match ? decodeURIComponent(match[1].replace(/\+/g, ' ')) : null;

can become

var match = RegExp('[?&]' + name + '=([^&]*)').exec(window.location.search);

return match && decodeURIComponent(match[1].replace(/\+/g, ' '));

The || operator is often used in this way for setting defaults:

evt = evt || window.event;

This is the same as writing

if (!evt)
    evt = window.event;

Creating repetitive strings using Array

If you want to initialize a long string of a particular character, you can do so by creating an array with a length of n+1, where n is the number of times you wish to repeat the character:

// Create a string with 30 spaces
str = "                              ";

// or
str = Array(31).join(" ");

The larger the string, the bigger the saving.

Parsing numbers

Use + and ~ operators instead of parseFloat() or parseInt() when coalescing a string type that is just a number to a number type:

var num = "12.6";
parseFloat(num) === +num;  // + is 10 characters shorter than parseFloat()

var num2 = "12"
parseInt(num2) === +num2;   // + is 8 characters shorter than parseInt()

var num3 = "12.6"
parseInt(num3) === ~~num3;  // ~~ is 7 characters shorter than parseInt()

var num4 = "12.6"
parseInt(num4) === num4|0;  // |0 is 7 characters shorter than parseInt()

Be wary though, other types can be coalesced with these operators (for instance, true would become 1) an empty string or a string containing just white space would become 0. This could be useful in certain circumstances, however.

\$\endgroup\$
2
  • 7
    \$\begingroup\$ +1 for Creating repetitive strings using Array - hadn't thought about that one. \$\endgroup\$
    – mellamokb
    Jun 9, 2011 at 15:04
  • 11
    \$\begingroup\$ To create repetitive strings, in ES6 you can use str.repeat(count) \$\endgroup\$
    – Oriol
    May 12, 2015 at 16:38
33
\$\begingroup\$

Unicode shortcuts

If you use a hell of a built-in property at a big golfing challenge you can alias every property to a one character equivalent:

[Math,Number,S=String,Array].map(b=>
    Object.getOwnPropertyNames(b).map((p,i)=>
        b.prototype[S.fromCharCode(i+248)]=b[p]
    )
)

After executing the code above you can use it like this:
"foo".Č(/.*/,'bar') // replaces foo with bar

This costs 118 bytes, so it might not be useful in certain situations

It may be browser dependent and i'm not sure if it's shorter than with(Array){join(foo),...} or defining variables as used properties with(Array){j=join,m=map...} but still it is worth mentioning.

    Math        Number              String              Array

ø   toSource    prototype           prototype           prototype
ù   abs         NaN                 quote               join
ú   acos        POSITIVE_INFINITY   substring           reverse
û   asin        NEGATIVE_INFINITY   toLowerCase         sort
ü   atan        MAX_VALUE           toUpperCase         push
ý   atan2       MIN_VALUE           charAt              pop
þ   ceil        MAX_SAFE_INTEGER    charCodeAt          shift
ÿ   clz32       MIN_SAFE_INTEGER    contains            unshift
Ā   cos         EPSILON             indexOf             splice
ā   exp         isFinite            lastIndexOf         concat
Ă   floor       isInteger           startsWith          slice
ă   imul        isNaN               endsWith            filter
Ą   fround      toInteger           trim                isArray
ą   log         parseFloat          trimLeft            lastIndexOf
Ć   max         parseInt            trimRight           indexOf
ć   min         length              toLocaleLowerCase   forEach
Ĉ   pow         name                toLocaleUpperCase   map
ĉ   random      arguments           normalize           every
Ċ   round       caller              match               some
ċ   sin                             search              reduce
Č   sqrt                            replace             reduceRight
č   tan                             split   
Ď   log10                           substr  
ď   log2                            concat  
Đ   log1p                           slice   
đ   expm1                           fromCharCode    
Ē   cosh                            fromCodePoint   
ē   sinh                            localeCompare   
Ĕ   tanh                            length  
ĕ   acosh                           name    
Ė   asinh                           arguments   
ė   atanh                           caller  
Ę   hypot           
ę   trunc           
Ě   sign            
ě   cbrt            
Ĝ   E           
ĝ   LOG2E           
Ğ   LOG10E          
ğ   LN2         
Ġ   LN10            
ġ   PI          
Ģ   SQRT2           
ģ   SQRT1_2         
\$\endgroup\$
5
  • 1
    \$\begingroup\$ I'm using google chrome, and these are all giving undefined. \$\endgroup\$ May 14, 2015 at 19:19
  • \$\begingroup\$ It must be very firefox specific then. Sorry for the inconvenience. \$\endgroup\$
    – bebe
    May 15, 2015 at 16:44
  • \$\begingroup\$ Why are these all special characters? Why not just use printable ASCII? (easier to type, more reliable, and only 1 byte for golfing) \$\endgroup\$
    – Cyoce
    Feb 10, 2016 at 20:02
  • 1
    \$\begingroup\$ This doesn't really work for Math because it doesn't have a .prototype attribute. Removing Math, though, I managed to golf this down to a 114-byte snippet that assigns them all to single-byte letters. You can find it here. \$\endgroup\$ Dec 3, 2016 at 20:50
  • 3
    \$\begingroup\$ You can also golf my solution to 106 bytes at the expense of moving all these properties to the range À-ÿ, which is still 1 byte each in the ISO-8859-1 encoding (which JS supports). In Firefox 50, this unfortunately puts the .localeCompare method on ×, but that shouldn't usually be an issue. source \$\endgroup\$ Dec 3, 2016 at 21:59
31
\$\begingroup\$

Combine nested for loops:

// before:
for(i=5;i--;)for(j=5;j--;)dosomething(i,j)

// after:
for(i=25;i--;)dosomething(0|i/5,i%5)

Example with different values for i/j:

// before:
for(i=4;i--;)for(j=7;j--;)dosomething(i,j)

// after:
for(i=28;i--;)dosomething(0|i/7,i%7)
\$\endgroup\$
3
  • \$\begingroup\$ (I've edited a) minor typo, but very clever! Note that this will only work on nested loops of same length (unless I'm wrong). \$\endgroup\$ Dec 18, 2012 at 13:26
  • 1
    \$\begingroup\$ @CamiloMartin No, the loops don't need to be of equal length. The resulting number of iterations is i*j and the division/modulus operators retrieve the individual values of i and j. \$\endgroup\$
    – quietmint
    Dec 19, 2013 at 0:38
  • \$\begingroup\$ @user113215 You're right, awesome! :) I've edited the answer to include an example. \$\endgroup\$ Dec 19, 2013 at 14:14
30
\$\begingroup\$

Sneak variable initialization into the prompt() call for getting user input

n=prompt(i=5);     // sets i=5 at the same time as getting user input

instead of using

n=prompt();i=5;

As a side-effect, it displays the input value in the prompt window while saving 1 character.

\$\endgroup\$
7
  • 17
    \$\begingroup\$ This can also be applied to any function that doesn't accept arguments. \$\endgroup\$
    – Casey Chu
    Jun 19, 2011 at 21:59
  • 3
    \$\begingroup\$ Even when the function accepts arguments it can be useful, as in [1,2,3].join('',i=5) in cases where it saves a pair of braces. \$\endgroup\$
    – DocMax
    Jun 30, 2011 at 0:58
  • 3
    \$\begingroup\$ @DocMax: You could use comma operator for that - i=5,[1,2,3].join(). \$\endgroup\$
    – 0..
    Jan 4, 2013 at 11:59
  • \$\begingroup\$ @GlitchMr: I could, but it doesn't save any characters. I agree that most of the time that will be cleaner. I think there may still be cases where my ordering might save a char, although I cannot come up with one at the moment (and I may well be wrong). \$\endgroup\$
    – DocMax
    Jan 4, 2013 at 17:01
  • \$\begingroup\$ @DocMax Only if you are taking advantage of ASI. \$\endgroup\$
    – Claudia
    Feb 12, 2015 at 4:10
28
\$\begingroup\$

Use ^ instead of != or == when comparing to an integer

//x!=3?a:b
  x^3?a:b

//x==3?a:b
  x^3?b:a

Replace calls to built-in Math functions with shorter expressions

//Math.ceil(n)
  n%1?-~n:n

//Math.floor(n)
  ~~n
  0|n

//Math.abs(n)
  n<0?-n:n

//Math.round(n)
  n+.5|0

//Math.min(x,y)
  x<y?x:y

//Math.max(x,y)
  y<x?x:y
\$\endgroup\$
3
  • 6
    \$\begingroup\$ Alternatively, you can simply use - instead of != for integers; For example, n!=1?a:b would be equivalent to n-1?a:b \$\endgroup\$
    – user83717
    May 3, 2019 at 10:32
  • \$\begingroup\$ For arrays, use Math.max(...a) though. \$\endgroup\$
    – emanresu A
    Mar 30, 2021 at 20:46
  • 1
    \$\begingroup\$ These wont work for negatives... \$\endgroup\$ Nov 21, 2021 at 13:24
25
\$\begingroup\$

Array sum / product / quotient

ES5: 17 bytes

eval(a.join('+'))

ES6: 15 bytes

eval(a.join`+`)

Of course you can swap the + for anything you want, e.g., * for product or / for quotient.

\$\endgroup\$
1
  • 2
    \$\begingroup\$ +1, tired of using reduce and using up bytes \$\endgroup\$
    – user100690
    Mar 11, 2021 at 16:56
25
\$\begingroup\$

Abuse literals

The recent sample: Check whether "c" is uppercase or lowercase, doesn't matter if not letter

"c"<{} // returns false, lower case
"C"<{} // returns true, upper case
\$\endgroup\$
3
  • 4
    \$\begingroup\$ How does this work? \$\endgroup\$
    – user41805
    Jun 26, 2018 at 10:15
  • 10
    \$\begingroup\$ @Cowsquack String({}) gives "[object Object]". \$\endgroup\$
    – Dennis
    Jun 26, 2018 at 14:49
  • \$\begingroup\$ wow. this is neat! thanks \$\endgroup\$ Mar 21 at 10:12
24
\$\begingroup\$

Exception abusing

in case string/character literals are prohibited, you can use a try catch block:

try{something0}catch(e){str=e.message.split(0)[0]}

now str equals "something"

if more strings are needed you can chain it with a number (e.g. zeros)

try{something0foo0bar0}catch(e){arr=e.message.split(0)}

now arr equals ["something", "foo", "bar", " is not defined"]

\$\endgroup\$
22
\$\begingroup\$

If you need to check for NaN, don't use isNaN(x), but use x!=x, which is shorter and also works.

if(isNaN(x)){
if(x!=x){

Note that this only works if typeof(x) === "number"; if it's a string for example, isNaN("string") returns true, but "string" != "string" returns false. Thanks to Cyoce for pointing this out!

\$\endgroup\$
6
  • 2
    \$\begingroup\$ That's a genius use of this quirk. +1 \$\endgroup\$ Dec 22, 2015 at 21:05
  • \$\begingroup\$ Warning: these are not always equivalent: isNaN("string") returns true, whereas "string"!="string" returns false (obviously) \$\endgroup\$
    – Cyoce
    Feb 10, 2016 at 22:18
  • \$\begingroup\$ @Cyoce Good point, thanks! I edited my answer. \$\endgroup\$
    – ProgramFOX
    Feb 11, 2016 at 7:36
  • \$\begingroup\$ In many cases, you can even go for if(!x){, if you are detecting NaN explicitly. \$\endgroup\$ Aug 9, 2016 at 21:24
  • 3
    \$\begingroup\$ Casting x to number, +x!=+x, makes it equivalent to isNaN(x), yet still 2 characters shorter. Then, +"string"!=+"string" returns true. \$\endgroup\$ Sep 8, 2017 at 19:50
21
\$\begingroup\$

Converting a while loop into a for loop is often equivalent:

while(i--);
for(;i--;);

But the second form can have variable initialization combined:

i=10;while(i--);
for(i=10;i--;);

Notice the second form is one character shorter than the first form.

\$\endgroup\$
1
  • 6
    \$\begingroup\$ Or, even better, just use for loops. There's really no case where using a for loop results in larger code, as far as I have experienced. \$\endgroup\$
    – Claudia
    Feb 12, 2015 at 4:08
17
\$\begingroup\$

If you're initializing a variable to 1 in every iteration of a loop (for example, resetting a variable in an outer loop for an inner loop), like the following (from my answer to this question):

for(j=n-2;p=1,j++<=n;r|=p)for(i=1;++i<j;)p=j%i?p:0;
          ^^^^

Since the result of a condition like j++<=n is 1 whenever its true, you can just assign the condition directly to the variable (because when it becomes false, the loop will stop executing and will no longer matter):

for(j=n-2;p=j++<=n;r|=p)for(i=1;++i<j;)p=j%i?p:0;
          ^^^^^^^^

You can usually save 2 characters using this method. Regards to @ugoren for the idea in the comments to that answer.


For another example, I also applied this trick to my answer here with the expression w=r=++c<S.length in my outer for loop, saving a total of 4 characters.

\$\endgroup\$
0
17
\$\begingroup\$

If you can accept Spidermonkey (for now) specific scripts, you can use ECMAScript 6 arrow functions. Insteading of writing code like the following.

a.map(function(x){return x*2}) // function? return?

You can shorten it like this.

a.map(x=>x*2)
\$\endgroup\$
1
15
\$\begingroup\$

Rounding

I know that alternatives to Math.floor() have been posted, but what about the others?

Flooring:

Math.floor(x) //before
0|x           //after

Rounding:

Math.round(x) //before
0|x+.5        //after

Ceiling:

Math.ceil(x) //before
x%1?-~x:x    //after - credits to @Tomas Langkaas
\$\endgroup\$
7
  • 1
    \$\begingroup\$ Note that 0|x+1 simply adds 1 if the number you want to find the ceiling of is already an integer. A (mostly) safe alternative is 0|x+1-1e9, but this is only three bytes shorter. \$\endgroup\$ Nov 7, 2015 at 18:11
  • 1
    \$\begingroup\$ @ETHproductions don't you mean 0|x+1-1e-9? \$\endgroup\$ Nov 24, 2015 at 1:40
  • \$\begingroup\$ Oops, yeah. Thanks for pointing that out. (For some reason, I can't do @(your username)...) \$\endgroup\$ Nov 24, 2015 at 1:42
  • \$\begingroup\$ Probably because my username chars are upside down :) \$\endgroup\$ Nov 24, 2015 at 1:45
  • 1
    \$\begingroup\$ For ceiling, x%1?-~x:x (9 characters) is a better alternative. However, like the flooring alternatives 0|x and ~~x, it only works for positive numbers. \$\endgroup\$ Sep 8, 2017 at 18:40
14
\$\begingroup\$

Use a bitwise operation to round a number toward zero:

// do this
T=Math.random()*6+1|0

// or do this
T=~~(Math.random()*6+1)

(Source: Random dice tipping)

Operator precedence determines which will be shorter in your program.

\$\endgroup\$
5
  • 2
    \$\begingroup\$ This can also be used to coalesce a string input into an integer, i.e., n=prompt()|0. \$\endgroup\$
    – mellamokb
    May 27, 2011 at 13:31
  • 1
    \$\begingroup\$ bitwise is also super fast compared to math.floor : jsperf.com/floor-vs-bitwise \$\endgroup\$
    – vsync
    Jun 7, 2011 at 22:33
  • \$\begingroup\$ @vsync: Weird. I get math.floor to be about twice as fast as bitwise on Chrome 11.0.696.77. \$\endgroup\$
    – mellamokb
    Jun 8, 2011 at 11:47
  • \$\begingroup\$ very weird. for me they are both more or less same speeds & super fast in Chrome, but in FF the bitwise is a lot faster than Chrome, and Math.floor is terribly slow..almost should not be used I would say. \$\endgroup\$
    – vsync
    Jun 8, 2011 at 16:15
  • \$\begingroup\$ To keep the comments up-to-date, in current Fx they're both fast & about equal. Not that it's likely to be a bottleneck in the first place, compared to surrounding code... \$\endgroup\$
    – FireFly
    Feb 1, 2014 at 20:13
14
\$\begingroup\$

Looping Tip I

You can save 1 character when looping by changing the i on the last time used:

//not so god
for(i=0;i<3;i++){
  alert(i);
}

//best
for(i=0;i<3;){
  alert(i++);
}

Note: works with -- too (but modify the loop accordingly to avoid infinite looping)


Looping Tip II

There are certain scenarios where you can save one character by playing with the incrementing operator and values:

for(i=0;i++<9;)
for(i=0;++i<10;)

Note: you need to pay attention when for example 0 to -1. and 9 to 10, 99 to 100, so play around until you find a way to save the character

\$\endgroup\$
0
13
\$\begingroup\$

Very simple one, even so, no one had mentioned it.

If you're using Math.min() or Math.max() you can save 6 chars by doing this:

Math.min(a,b)  // 13 chars
a<b?a:b        //  7 chars

Math.max(a,b)
a>b?a:b
\$\endgroup\$
13
\$\begingroup\$

Free commas!

Often you'll want to include a comma in a string, perhaps like so:

f=(x,y,z)=>x+","+y+z

By abusing the string representation of arrays, this can be shortened by two bytes:

f=(x,y,z)=>[x,y]+z

This particular instance only works if you have three variables you want to concatenate as shown. You can use the same trick with two, but you need to be careful. There are three variants you might try:

f=(x,y)=>[x,y]
f=(x,y)=>[x,]+y
f=(x,y)=>x+[,y]

The first one will return an actual array rather than a string, which defeats the purpose. The second one looks like it will work, but in fact most modern browsers will remove the trailing comma when parsing the array. The third one will work though, at the same byte count as the second.


To put this to good use, say you have a function which creates the range [0...n]:

f=x=>x?[...f(x-1),x]:[0]

If returning a string with a separator is allowed, you might do something like this, saving a few bytes:

f=x=>x?f(x-1)+" "+x:0

However, you can save another byte with an array literal:

f=x=>x?f(x-1)+[,x]:0

Note that depending on how you arrange the recursion, you may end up with a leading or trailing separator, so you'll need to make sure your output format is allowed by the challenge.

Example usage

\$\endgroup\$
2
  • \$\begingroup\$ You may not be able to do [x,]+y, but you can do [x,,]+y. Though it occurs to me that's the same amount of bytes as x+','+y, so nevermind. \$\endgroup\$ Oct 5, 2017 at 5:43
  • \$\begingroup\$ you can save 1 byte: f=x=>x?f(x-1)+" "+x:0 ==> f=x=>x&&f(x-1)+" "+x \$\endgroup\$
    – Yukulélé
    Feb 12, 2022 at 23:19
12
\$\begingroup\$

Prefer .map over .reduce

Consider the following code for summing an array:

a.reduce(function(x,y){return x+y})

Pretty long, right? What if I told you that you could get rid of the return? Well, you can:

a.map(function(x){t+=x},t=0)    // 7 bytes saved

(Although an even shorter way is eval(a.join("+")).)

How about reducing by multiplication, where you have to specify the starting number anyway?

a.reduce(function(x,y){return x*y},1)  // Looooong
a.map(function(x){t*=x},t=1)    // An easy 9 bytes shorter

(Again, eval(a.join("*")) works as well.)

Here, let's try one that doesn't work with eval(a.join()):

a.reduce(function(x,y){return x+f(y)})
a.map(function(x){t+=f(x)},t=0)

Note that this doesn't work quite as well with ES6, although it's still a little shorter:

a.reduce((x,y)=>x+f(y))
a.map(x=>t+=f(x),t=0)

Note: in all of the .map versions, you will need to call t afterwards to get the actual value.

\$\endgroup\$
2
  • \$\begingroup\$ Can you apply the same logic for ES6? \$\endgroup\$ Aug 23, 2016 at 19:57
  • \$\begingroup\$ @SunnyPatel Yep, although it doesn't work out quite as well. \$\endgroup\$ Nov 22, 2016 at 15:53
11
+50
\$\begingroup\$

Converting an array of strings into numbers

Take the array ["32", "0x30", "0o10", "7.642", "1e3"]. The simple way to convert this to numbers would be .map(n=>+n) or .map(Number).

However, assuming you know everything is a valid number, you can simply use .map(eval), saving at least a byte.

\$\endgroup\$
9
\$\begingroup\$

Something worth noting is that you can use a string in place of zero in some instances to save a couple of bytes here and there in loops:

s='';for(i=0;i++<9;)s+=i
for(i=s='';i++<9;)s+=i
// s="123456789", i=10
\$\endgroup\$
1
  • 1
    \$\begingroup\$ I tried ""++ in the console earlier wondering if it would work, of course it has to be in a variable first. Thanks! \$\endgroup\$
    – Vartan
    Jul 30, 2015 at 21:00
9
\$\begingroup\$

How to compare a number with help of how numbers turn into booleans:

If you are going to check if something is equal to a positive number, you can subtract that amount and reverse what was inside the if and else blocks:

//simplified examples:
x==3?"y":"n"; <- 13 Chars
x-3?"n":"y"; <- 12 Chars

//expanded examples:
if(x==3){
    yes();
}else{
    no();
}

if(x-3){
    no();
}else{
    yes();
}

And in case you are wanting to compare with a negative number (*different than -1), you just simply need to add this number instead of subtracting.

*well, you can surely use x.indexOf(y) + 1, but in the special case of -1 you have the opportunity to use ~x.indexOf(y) instead.

\$\endgroup\$
9
\$\begingroup\$

In cases where you are using the ternary operator to chose between two numbers, and the conditional is either a boolean or number 1 or 0, you can do math operations instead:

(x ? num1 : num2) conclusions:

    1)if num1 equals num2, there ARE savings
    2)if num1 is (+1) or (-1) than num2, there ARE savings
    3)if either num1 or num2 equals to 0, there ARE savings
    4)it is MORE LIKELY to find greater savings on num1>num2 instead of num1<num2
    5)in method (*A) and (*B), savings are NOT GUARANTEED

    a)num1>num2
        i)(num1==(num2+1))
            ex1: (x?5:4) to (x+4)
            ex2: (x?8:7) to (x+7)
        ii)num2==0
            ex1: (x?3:0) to (x*3)
            ex2: (x?7:0) to (x*7)
        iii)
            (*A) or (*B) //one might be shorter

    b)num1<num2
        i)((num1+1)==num2)
            ex1: (x?4:5) to (5-x)
            ex2: (x?7:8) to (8-x)
        ii)num1==0
            ex1: (x?0:3) to (!x*3)
            ex2: (x?0:7) to (!x*7)
        iii)
            (*A) or (*B) //one might be shorter

    c)num1==num2
        i)
            ex1: (x?5:5) to (5)
            ex2: (x?-3:-3) to (-3)

    (*A) use ((x*(num1-num2))+num2)
        ex1: (x?8:4)   to ((x*4)+4)
        ex2: (x?4:8)   to ((x*-4)+8)

        ex3: (x?6:-4)  to ((x*10)-4)
        ex4: (x?-4:6)  to ((x*-10)+6)

        ex5: (x?4:-6)  to ((x*10)-6)
        ex6: (x?-6:4)  to ((x*-10)+4)

        ex7: (x?-5:-9) to ((x*4)-9)
        ex8: (x?-9:-5) to ((x*-4)-5)

    (*B) use ((!x*(num2-num1))+num1)
        ex1: (x?8:4)   to ((!x*-4)+8)
        ex2: (x?4:8)   to ((!x*4)+4)

        ex3: (x?6:-4)  to ((!x*-10)+6)
        ex4: (x?-4:6)  to ((!x*10)-4))

        ex5: (x?4:-6)  to ((!x*-10)+4)
        ex6: (x?-6:4)  to ((!x*10)-6)

        ex7: (x?-5:-9) to ((!x*-4)-5)
        ex8: (x?-9:-5) to ((!x*4)-9)

Note: In addition to this, you will need to remove the unnecessary 0-, +0, +- etc.

Note2: there is an isolated case where (x) !== (x?1:0), as x must be typeof === "number" for it to work. However, in the case of (-x) it works just fine.

Note3: In case you don't find savings, simply use the former (x?y:z)

Previously I thought method B couldn't ever beat A, however exceptions do exist:

(x?97:100) //original

(-3*x+100)
(3*!x+97)

I created a github project that makes the simplification for us (jsFiddle demo)

\$\endgroup\$
3
  • \$\begingroup\$ @ajax333221 void 0 (it isn't a function, but a keyword) is not a value, it simply returns undefined. \$\endgroup\$ Dec 18, 2012 at 12:07
  • \$\begingroup\$ @CamiloMartin you are right, also I now see the point in this answer, however a must be either 1 or 0 for it to work \$\endgroup\$
    – ajax333221
    Dec 18, 2012 at 16:30
  • \$\begingroup\$ @ajax333221 Yes, actually the funny thing about code golfing to me is that most of the best tricks only work for that particular thing you're doing, and one feels so clever to find one of these corner cases with corner solutions :D By the way, you don't have to delete comments... \$\endgroup\$ Dec 19, 2012 at 2:07
9
\$\begingroup\$

Instead of writing true you can use !0.

\$\endgroup\$
2
  • 6
    \$\begingroup\$ Likewise, !1 for false. \$\endgroup\$ Jan 17, 2015 at 17:46
  • 18
    \$\begingroup\$ Better yet, use 1 for true and 0 for false, unless you really need the literal values. \$\endgroup\$ Dec 13, 2016 at 18:24
9
\$\begingroup\$

Transforming to a Boolean:

if(b){b=true}else{b=false}
b=b?true:false;
b=b?!0:!1;
b=!!b;

Note: This changes 0, "",false, null, undefined and NaN to false (everything else to true)

\$\endgroup\$
1
  • \$\begingroup\$ it also changes the DOM method document.all to false but that isn't really relevant to code golf, lol \$\endgroup\$
    – noodle man
    May 20, 2023 at 13:50

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.