39
\$\begingroup\$

Related but very different.

A boustrophedon is a text where every other line of writing is flipped or reversed, with reversed letters.

In this challenge, we will just reverse every other line, but leave the actual characters used intact. You may chose which lines to reverse, as long as it is every other one.

You may take the text in any suitable format as long as you support zero or more lines of printable ASCII, each with zero or more characters.

Examples:

["Here are some lines","of text for you","to make a","boustrophedon"]:

["Here are some lines","uoy rof txet fo","to make a","nodehportsuob"] or ["senil emos era ereH","of text for you","a ekam ot","boustrophedon"]


["My boustrophedon"]:

["My boustrophedon"] or ["nodehportsuob yM"]

[]:  
[]

["Some text","","More text","","","Last bit of text"]:

["Some text","","More text","","","txet fo tib tsaL"] or ["txet emoS","","txet eroM","","","Last bit of text"]
\$\endgroup\$
10
  • \$\begingroup\$ Can't understand if return and input need to be text separated lines or it can be a file or a list of lines. \$\endgroup\$
    – sergiol
    Dec 8, 2017 at 12:30
  • \$\begingroup\$ @sergiol Default PPCG I/O rules apply. \$\endgroup\$
    – Adám
    Dec 8, 2017 at 12:35
  • \$\begingroup\$ Can my code behave inconsistently, i.e. sometimes start reversing from the first line and sometimes from the second? \$\endgroup\$ Dec 8, 2017 at 13:02
  • 2
    \$\begingroup\$ @EriktheOutgolfer Yes, I asked about this earlier and the wording of "You may chose which lines to reverse, as long as it is every other one." was actually changed to what it is now to make it general enough for that behaviour. \$\endgroup\$ Dec 8, 2017 at 13:12
  • 1
    \$\begingroup\$ @totallyhuman Yes, as per OP. \$\endgroup\$
    – Adám
    Dec 9, 2017 at 20:07

54 Answers 54

23
\$\begingroup\$

APL (Dyalog Classic), 4 bytes

⊢∘⌽\

The input is a vector of character vectors.

is a function that reverses a vector (when is applied monadically).

is "dex" - a function that returns its right argument. When composed () with another function f it forces the latter to be monadic as A ⊢∘f B is equivalent to A ⊢ (f B) and therefore f B.

\ is the scan operator. g\A B C ... is the vector A (A g B) (A g (B g C)) ... where g is applied dyadically (infix notation). Substituting ⊢∘⌽ for g it simplifies to:

A (A ⊢∘⌽ B) (A ⊢∘⌽ (B ⊢∘⌽ C)) ...
A (⌽B) (⌽⌽C) ....
A (⌽B) C ....

The reversals at even positions (or odd, depending on how you count) cancel out.

Try it online!

\$\endgroup\$
2
  • 5
    \$\begingroup\$ That’s literally ]&|.&.>/\ for those who can read J. \$\endgroup\$
    – FrownyFrog
    Dec 8, 2017 at 15:29
  • 3
    \$\begingroup\$ This is really clever. \$\endgroup\$ Dec 8, 2017 at 18:21
13
\$\begingroup\$

Haskell, 26 bytes

zipWith($)l
l=id:reverse:l

Try it online! Usage example: zipWith($)l ["abc","def","ghi"] yields ["abc","fed","ghi"].

Explanation:

l is an infinite list of functions alternating between the identity function and the reverse function.

The main function zips l and the input list with the function application $, that is for an input ["abc", "def", "ghi"] we get [id$"abc", reverse$"def", id$"ghi"].

\$\endgroup\$
0
13
\$\begingroup\$

Husk, 4 bytes

z*İ_

Takes and returns a list of strings (the interpreter implicitly joins the result by newlines before printing). The first string is reversed. Try it online!

Explanation

z*İ_  Implicit input.
  İ_  The infinite list [-1,1,-1,1,-1,1..
z     Zip with input
 *    using multiplication.

In Husk, multiplying a string with a number repeats it that many times, also reversing it if the number is negative.

\$\endgroup\$
1
  • \$\begingroup\$ the special case of * with negatives should be added to the docs. \$\endgroup\$
    – Razetime
    Oct 13, 2020 at 7:35
7
\$\begingroup\$

JavaScript (ES6), Firefox, 43 bytes

This version abuses the sort algorithm of Firefox. It generates garbage on Chrome and doesn't alter the strings at all on Edge.

a=>a.map((s,i)=>[...s].sort(_=>i&1).join``)

Test cases

let f =

a=>a.map((s,i)=>[...s].sort(_=>i&1).join``)

console.log(f(["Here are some lines","of text for you","to make a","boustrophedon"]))
console.log(f(["My boustrophedon"]))
console.log(f([]))

Or Try it online! (SpiderMonkey)


JavaScript (ES6), 45 bytes

a=>a.map(s=>(a^=1)?s:[...s].reverse().join``)

Test cases

let f =

a=>a.map(s=>(a^=1)?s:[...s].reverse().join``)

console.log(f(["Here are some lines","of text for you","to make a","boustrophedon"]))
console.log(f(["My boustrophedon"]))
console.log(f([]))

\$\endgroup\$
0
6
\$\begingroup\$

APL (Dyalog Unicode), 10 bytes

⌽¨@{2|⍳≢⍵}

Works both ways:

Try it online! with ⎕IO←1

Try it online! with ⎕IO←0

How it works:

⌽¨@{2|⍳≢⍵} ⍝ tacit prefix fn
   {   ≢⍵} ⍝ Length of the input
      ⍳    ⍝ generate indexes from 1 (or 0 with ⎕IO←0)
    2|     ⍝ mod 2; this generates a boolean vector of 0s (falsy) and 1s (truthy)
  @        ⍝ apply to the truthy indexes...
⌽¨         ⍝ reverse each element
\$\endgroup\$
6
\$\begingroup\$

Perl 5, 17 + 2 (-pl) = 19 bytes

odd lines reversed

$_=reverse if$.%2

even lines reversed

$_=reverse if$|--

After @Martin's comment : input needs to have a trailing linefeed.

try it online

\$\endgroup\$
0
6
\$\begingroup\$

Haskell, 27 bytes

foldr((.map reverse).(:))[]

Try it online!

Haskell, 30 bytes

f(a:b:c)=a:reverse b:f c
f a=a

Try it online!

Recursion FTW.

\$\endgroup\$
5
\$\begingroup\$

05AB1E, 5 4 bytes

εNFR

Try it online!

Explanation

ε     # apply to each element (row)
 NF   # index times do:
   R  # reverse
\$\endgroup\$
4
\$\begingroup\$

R, 85 bytes

for(i in seq(l<-strsplit(readLines(),"")))cat("if"(i%%2,`(`,rev)(l[[i]]),"\n",sep="")

Try it online!

Input from stdin and output to stdout.

Each line must be terminated by a linefeed/carriage return/CRLF, and it prints with a corresponding newline. So, inputs need to have a trailing linefeed.

\$\endgroup\$
1
  • 1
    \$\begingroup\$ I like what you did with the function names in the if. It's less fun, but '(' could be c for -2 bytes. Also, \n can be an actual new line for -1. \$\endgroup\$ Sep 1, 2020 at 15:09
3
\$\begingroup\$

K (oK), 17 14 bytes

Solution:

@[;&2!!#x;|]x:

Try it online!

Example:

@[;&2!!#x;|]x:("this is";"my example";"of the";"solution")
("this is"
"elpmaxe ym"
"of the"
"noitulos")

Explanation:

Apply reverse at odd indices of the input list:

@[;&2!!#x;|]x: / the solution
            x: / store input as variable x
@[;      ; ]   / apply @[variable;indices;function] (projection)
          |    / reverse
       #x      / count (length) of x, e.g. 4
      !        / til, !4 => 0 1 2 3
    2!         / mod 2, 0 1 2 3 => 0 1 0 1       
   &           / where true, 0 1 0 1 => 1 3

Notes:

  • switched out &(#x)#0 1 for &2!!#x to save 3 bytes
\$\endgroup\$
3
\$\begingroup\$

APL (Dyalog), 12 bytes

⍳∘≢{⌽⍣⍺⊢⍵}¨⊢

Try it online!

\$\endgroup\$
3
\$\begingroup\$

Python 2, 40 36 bytes

-4 bytes thanks to @Mr.Xcoder

def f(k):k[::2]=map(reversed,k[::2])

Try it online!

Outputs by modifying the input list


Python 2, 43 bytes

f=lambda k,d=1:k and[k[0][::d]]+f(k[1:],-d)

Try it online!

\$\endgroup\$
0
3
\$\begingroup\$

Jelly, 5 4 bytes

U¹ƭ€

Try it online!

Thanks HyperNeutrino for -1 bytes! (actually because I never knew how ƭ works due to lack of documentation, this time I got lucky)

\$\endgroup\$
1
  • \$\begingroup\$ Tried ¦ with m (7 bytes). s2U2¦€;/ is also 7 bytes. \$\endgroup\$
    – DELETE_ME
    Dec 8, 2017 at 13:30
3
\$\begingroup\$

Alumin, 66 bytes

hdqqkiddzhceyhhhhhdaeuzepkrlhcwdqkkrhzpkzerlhcwqopshhhhhdaosyhapzw

Try it online!

FLAG: h
hq
  CONSUME A LINE
  qk
  iddzhceyhhhhhdaeuze
  pk
  rlhcw
  REVERSE STACK CONDITIONALLY
  dqkkrhzpkzerlhcwqops

  OUTPUT A NEWLINE
  hhhhhdao
syhapzw
\$\endgroup\$
1
  • 2
    \$\begingroup\$ @totallyhuman This is actually my language. \$\endgroup\$ Dec 8, 2017 at 16:18
3
\$\begingroup\$

J, 9 bytes

(,|.&.>)/

Reduce from right to left, reversing all strings in the result and prepending the next string as is.

Try it online!

We can do 6 using ngn’s approach, but there will be extra spaces:

]&|./\

Try it online!

\$\endgroup\$
2
\$\begingroup\$

T-SQL, 65 bytes

Our standard input rules allow SQL to input values from a pre-existing table, and since SQL is inherently unordered, the table must have row numbers to preserve the original text order.

I've defined the table with an identity column so we can simply insert lines of text sequentially (not counted toward byte total):

CREATE TABLE t 
    (i int identity(1,1)
    ,a varchar(999))

So to select and reverse alternating rows:

SELECT CASE WHEN i%2=0THEN a
ELSE reverse(a)END
FROM t
ORDER BY i

Note that I can save 11 bytes by excluding the ORDER BY i, and that is likely to return the list in the original order for any reasonable length (it certainly does for the 4-line example). But SQL only guarantees it if you include the ORDER BY, so if we had, say, 10,000 rows, we would definitely need this.

\$\endgroup\$
2
\$\begingroup\$

V, 4 bytes

òjæ$

Try it online!

ò      ' <M-r>ecursively (Until breaking)
 j     ' Move down (breaks when we can't move down any more)
  æ$   ' <M-f>lip the line to the end$
\$\endgroup\$
2
\$\begingroup\$

Perl 6, 44 bytes

lines.map: ->\a,$b?{a.put;.flip.put with $b}

Try it

lines               # get the input as a list of lines
.map:
-> \a, $b? {        # $b is optional (needed if there is an odd number of lines)
  a.put;            # just print with trailing newline
  .flip.put with $b # if $b is defined, flip it and print with trailing newline
}
\$\endgroup\$
2
\$\begingroup\$

Comma delimited:

Stax, 12 bytes

ü«äì╠▒╕█╬pεû

Run and debug it

input: ABC,def,GHI,jkl,MNO,pqr,STU

Newline delimited:

Stax, 8 bytes

Çε÷┘)¼M@

Run and debug it

input:

ABC
def
GHI
jkl
MNO
pqr
STU

output for both:

CBA
def
IHG
jkl
ONM
pqr
UTS
\$\endgroup\$
2
\$\begingroup\$

Brachylog, 4 bytes

i↔ⁱ⁾

Try it online!

Doesn't feel entirely honest to call this generator a 4-byter considering it costs 3 more bytes to actually use it.

i       Take an element from the input paired with its 0-index,
 ↔ ⁾    and reverse the element
  ⁱ     repeatedly
   ⁾    a number of times equal to the index.
\$\endgroup\$
1
\$\begingroup\$

Pyth, 6 bytes

.e@_Bb

Try it here!

  • .e ~ Enumerated map. k is the index, b is the current element.

  • _Bb ~ Bifurcate b with its reverse.

  • @ ~ Modular index in ^ with k.

\$\endgroup\$
1
\$\begingroup\$

Actually, 7 bytes

;r'R*♀ƒ

Explanation:

;r'R*♀ƒ
;r       range(len(input))
  'R*    repeat "R" n times for n in range
     ♀ƒ  call each string as Actually code with the corresponding input element as input (reverse each input string a number of times equal to its index)

Try it online!

\$\endgroup\$
1
\$\begingroup\$

Alice, 13 bytes

M%/RM\
d&\tO/

Try it online!

Input via separate command-line arguments. Reverses the first line (and every other line after that).

Explanation

       At the beginning of each loop iteration there will always be zero
       on top of the stack (potentially as a string, but it will be
       converted to an integer implicitly once we need it).
M      Push the number of remaining command-line arguments, M.
%      Take the zero on top of the stack modulo M. This just gives zero as
       long as there are arguments left, otherwise this terminates the
       program due to the division by zero.
/      Switch to Ordinal mode.
t      Tail. Implicitly converts the zero to a string and splits off the
       last character. The purpose of this is to put an empty string below
       the zero, which increases the stack depth by one.
M      Retrieve the next command-line argument and push it as a string.
/      Switch back to Cardinal mode.
d      Push the stack depth, D.
&\R    Switch back to Ordinal mode and reverse the current line D times.
O      Print the (possibly reversed) line with a trailing linefeed.
\      Switch back to Cardinal mode.
       The instruction pointer loops around and the program starts over
       from the beginning.
\$\endgroup\$
1
\$\begingroup\$

Tcl, 61 bytes

proc B L {lmap e $L {expr [incr i]%2?"$e":"[string rev $e]"}}

Try it online!

\$\endgroup\$
1
\$\begingroup\$

Standard ML (MLton), 51 bytes

fun$(a::b::r)=a::implode(rev(explode b)):: $r| $e=e

Try it online! Usage example: $ ["abc","def","ghi"] yields ["abc","fed","ghi"].

Explanation:

$ is a function recursing over a list of strings. It takes two strings a and b from the list, keeps the first unchanged and reverses the second by transforming the string into a list of characters (explode), reversing the list (rev), and turning it back into a string (implode).

\$\endgroup\$
1
  • \$\begingroup\$ +1, not enough ML solutions imo \$\endgroup\$
    – jfh
    Dec 8, 2017 at 22:36
1
\$\begingroup\$

Stacked, 18 bytes

[{x i:x$revi*}map]

Try it online!

This simply reverses each string in the array according to its position.

Alternative, 24 bytes

[:#':>#,tr[...$rev*]map]

Same approach, but generates indices manually.

\$\endgroup\$
1
\$\begingroup\$

Python 2, 45 bytes

lambda k:[r[::i%-2|1]for i,r in enumerate(k)]

Try it online!

Python 2, 46 bytes

f=lambda k:k and[k[0][::len(k)%-2|1]]+f(k[1:])

Try it online!

\$\endgroup\$
1
\$\begingroup\$

Jelly, 5 bytes

UJḤ$¦

Try it online!*

*Jelly outputs nested lists joined by spaces, and there is no native string type. Strings in Jelly are lists of characters, and that's why they're displayed that way. If you want them to be merged by spaces, Try this.

\$\endgroup\$
1
\$\begingroup\$

Retina, 18 bytes

{O$^`\G.

*2G`
2A`

Try it online! Explanation: The first stage reverse the first line, then the second stage prints the first two lines, after which the third stage deletes them. The whole program then repeats until there is nothing left. One trailing newline could be removed at a cost of a leading ;.

\$\endgroup\$
1
\$\begingroup\$

Wolfram Language (Mathematica), 33 bytes

Fold[StringReverse@*Append,{},#]&

Try it online!

How it works

StringReverse@*Append, when given a list of strings and another string as input, adds the string to the end of the list and then reverses all of the strings.

Folding the input with respect to the above means we:

  • Reverse the first line.
  • Add the second line to the end and reverse both of them.
  • Add the third line to the end and reverse all three.
  • Add the fourth line to the end and reverse all four.
  • And so on, until we run out of lines.

Each line gets reversed one time fewer than the previous line, so the lines alternate direction.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.